Flat Wrought Iron

Kalimalena

Kalimalena

Feedback: +34 / =0 / -0
Joined
Jan 1, 2004
Messages
2,808
Aloha Gang,

Here’s some really old wrought iron I picked up years ago and stashed away…

Pulled some out of my stash to take pictures… quantity of each varies but there is a very limited amount I will offer...

For those who want thinner flatter stock to work with than the chain links I offered a while back…

Sorry for the rust on a couple of the bends… did that when I first got them and don’t really want to do it again …

but you can still see the quality of the wrought…

Sizes from left to right… sizes are approximate, weight is off my bathroom scale and length varies (additional pics in post #15)

2 3/4” wide by 1/2” thick by 12 3/4” long… about 3 pounds - ALL GONE

4” wide by 5/8” thick by 13 3/4 long… about 8 pounds - 30lbs left

4” wide by 13/16” thick by 13 3/4” long… about pounds - ALL GONE

3” wide by 7/8” thick by 11 1/2” long… about 7 pounds - ALL GONE

3” wide by 5/8” thick by 11 1/2” long… about 7 pounds - ALL GONE (see pics in post below)

$2.00 a pound plus $11.00 per box, Priority Mail, Insured with tracking shipping to anywhere in the USA.

Don’t want to go over 30 pounds for each box so I can stay in the good graces of the old ladies at my post office.

Thanks for looking…

Have a great weekend!

Take Care and God Bless,

K
 

Attachments

  • DSCF8749.jpg
    DSCF8749.jpg
    91.7 KB · Views: 116
  • DSCF8758.jpg
    DSCF8758.jpg
    97.8 KB · Views: 91
  • DSCF8759.jpg
    DSCF8759.jpg
    98.4 KB · Views: 72
  • DSCF8761.jpg
    DSCF8761.jpg
    100.3 KB · Views: 64
  • DSCF8760.jpg
    DSCF8760.jpg
    99.1 KB · Views: 64
Last edited:
A couple more pics...
 

Attachments

  • DSCF8751.jpg
    DSCF8751.jpg
    46.3 KB · Views: 54
  • DSCF8753.jpg
    DSCF8753.jpg
    99.7 KB · Views: 41
  • DSCF8755.jpg
    DSCF8755.jpg
    98.2 KB · Views: 41
  • DSCF8757.jpg
    DSCF8757.jpg
    101.4 KB · Views: 54
Stickytoes said:
I would like the 4" by 5/8" but am interested in the remainder of the lot also
Click to expand...

Aloha ST,

Still have some left...

You can email me at....

buckandbison at yahoo dot comm

Thanks for the interest,

Have a great Saturday!

Take Care and God Bless,

K
 
I would like the 4" wide X 5/8" thick
Is there any left? Willing to take what you have.
Please send "Visitor Message". Thanks, Greg
 
I'll take 3 pieces:


[2 pieces] 4” wide by 5/8” thick by 13 3/4 long… about 8 pounds

and

[1 piece] 3” wide by 7/8” thick by 11 1/2” long… about 7 pounds
 
Aloha Gang,

Been trying to post to this thread since yesterday with updates and some new pics....

So I'll try one more time...

Decided to cut, notch and bend some of the pieces where I only had a rusty bend...

Also found some thinner stock... 4x 3/8ths

Anyway... Thanks for all the inquires and purchases.... hope this works and the pics load...

4 x 13/16 - All gone

4 x 5/8 - 30 LBS LEFT

4 x 3/8 - All gone pending funds

3 x 13/16 - All gone pending funds

3 x 5/8 - ALL GONE

If you have not heard back from me... please email me at

buckandbison at yahoo dot com

Thanks again for all the interest...

Have a great week all!

Take Care and God Bless,

K
 

Attachments

  • DSCF8764.jpg
    DSCF8764.jpg
    94.3 KB · Views: 8
  • DSCF8765.jpg
    DSCF8765.jpg
    83.6 KB · Views: 8
  • DSCF8766.jpg
    DSCF8766.jpg
    75.3 KB · Views: 7
  • DSCF8767.jpg
    DSCF8767.jpg
    78.1 KB · Views: 11
  • DSCF8768.jpg
    DSCF8768.jpg
    82 KB · Views: 7
Last edited:
I would like 4 pieces of 4 x 3/8. Please "Visitor Message" me with total cost & payment requirements. Thanks, Greg
 
You must log in or register to reply here.
Back
Top