- Joined
- Sep 8, 2011
- Messages
- 2,694
I've got some knives up for trade.
U.S. only, 18+ only. Know your own local knife laws. Members with no or low feedback may be asked to ship first.
PM or email with questions and offers please.
I’m mostly interested in a large Sebenza 21 with inlays, Busse Ergo Public Defender, Spyderco G10 Dragonfly. I’m open to any knife offer though. Multiples or cash can go either way.
I’m also interested in non knife offers. Mostly guns, gun parts or Surefires(Aviator would be awesome). Any offer is welcome.
All knives have been used, some more than others.
Folders
ZT 0562CF M390- Used. In good condition with solid lockup and no blade play. Smooth flipping action. Centering slighty favors the lock side but not rubbing the liner. Some scratches on the blade from use. Some slight discoloration near the detent hole on the blade. Some slight wear on the spine from light scraping. Ti scale probably has some scratches/snail trails, mostly blends with the stonewashing. A couple dings and some scuffing in the carbon fiber along the edges. Some wear one the clip and hardware. Box included but no paperwork. Will be wrapped in a priority mail bag in the box.
ZT 0620CF Cts204P- Used. In good condition with solid lock up with no blade play. Smooth opener when, but doesn’t flip open very well. Centering slightly favors show side. Some scratches on the blade from use. Some scratches/snail trails in the Ti scale the mostly blends in with the stonewashing. Some scuffing in the carbon fiber. Some wear on the hardware and pocket clip. Comes with original pocket clip only. No box or paperwork.
Kershaw Skyline Bladeforums and Flytanium scales, and brown g10 scales- DOES NOT come with the original blue scales. Comes with original box. Please read description.
This one is a slight fixer upper. Pocket clip screws are fracked up good from my failed Dremel attempt to get them out. They stripped when I was putting the Ti scales on. Pocket clip holds the knife tight but it does wiggle a bit. Grip screw receiving end isn’t flush as it should be. One of the grip screws is a little stripped as well. There is a slight gap on the liner and the scale because of these. Some side to side play. Ever so slightly off center. Some snail trails on the TI and scratches on the blade. Brown scales are in good condition, some slight discoloration and G10 is not as grippy as it used to be. Carried it with these scales for awhile before the Ti scales. Not a collectors piece by any means, but even in it’s current condition it’s a great carry knife.
ZT 0450- Used in good condition. Centering is good, lockup is solid. Smooth flipping action. Snail trails on the Ti, scratches on the blade. Slight discoloration on the blade in one small spot, unsure of what it is. Edge was re-profiled and sharpened by previous owner. I don’t recall if I’ve touched up the edge on my Sharpmaker. Comes with box and papers.
Benchmade 950 Rift(Ti handled possibly)- Used in good condition. Centering slightly favors one side. Lockup is pretty solid. Smooth action. Scratches on the blade. Some rust is starting around the thumbstud and by the spine. Some dings in the G10. Hardware, clip and liners show some wear. There is some rust on the liners.
Ripps garage Tech Titanium handle scales for the Rift can be included or traded separately. They’ve been anodized light blue. A couple of snail trails on the Ti. They are slightly thicker than stock and a bit heavier. They add about an ounce and a half to the overall weight.
Spyderco Delica Titanium and Damascus- Used in good condition. Solid lockup. Centering slightly favors one side with no rubbing. Smooth opening but does not flick open. Scratches on the blade from use. Some dings in the spine above the hole. Not sure what they’re from. Snail trails in the handle. Knife only, no box or paperwork.
Spyderco Gayle Bradley 2- Used in pretty good condition. Solid lock up and smooth opening. Centering slightly favors non lock side. Scratches on blade from use. Chip in the blade about a .25in from tip. Some rust developing on blade. Some black residue on blade, honestly don’t remember what it was from. Some slight scuffs on handles and a small area of yellow discoloration on the back of the handle. Some rust on the inside of the handles. Knife only, no box or paperwork.
Fixed Blades- None of the fixed blades come with original boxes.
ZT0121- Used. In good condition. Scuffs(some are blue?) in the DLC from use and sheath. Some scuffs on the handles. Comes with original sheath and a custom. The originals retention is pretty loose but has the strap so it works. The strap is chewed up some from inserting the blade. The custom sheath has pretty good retention. Draws nicely but difficult to insert. Comes with a large teklok.
Bradshaw blades cord wrapped tanto 52100. This has been carried and used. I tried my hand at applying a forced patina using mustard. It’s overall pretty dark and kind of ugly imo. The blade is decently sharp but could use a touch up. Comes with a kydex sheath that’s a little loose and has few dings on the carbon fiber textured side
Jeff Baker S-Tac w/ Big Chris regrind- Bronze impregnated carbon fiber handles over bronze and black liners and bronze pins and lanyard tube. It's 1/8" CPM154 with a 3.5" blade and is 7.6 OAL. Very minor marks on the blade and handles. Comes with a very nice leather pocket sheath. Sheath has a scuff on the tooled side.
Backwoods Personal in 1095 and box elder burl handles. It has some file work and the spine and comes with a nicely tooled horizontal sheath. The knife has been carried and used some. Decently sharp, could use a touch up though. The blade has a few scratches and a fair amount of staining/patina. The sheath has a few dings in the leather. Retention is loose when not being worn, but when worn on the belt it tightens up nicely.
Leethal Cutlery wharncliff in W2 and black micarta handles. The scales are pretty marked up. More than I could capture in pictures. The blade has a solid amount of staining/patina. There also is a little bit of red rust I think right where the blade meets the handle scales. The convex edge is quite sharp, but has a few minor chips in the edge. This one comes with two kydex sheaths. A neck sheath and a belt sheath. Both have good retention. The belt sheath has a kydex belt loop attached to it. It will only fit about 1.25” belt, slim one at that. If you wear a belt designed to carry a firearm this more than likely will NOT fit.
Hinderer Flashpoint S35vn- Very lightly used. There are probably some kydex marks on the blade but can’t really tell with the stonewashing. Comes with a kydex sheath, very good retention.
GONE-----Becker 15-
----GONE
ZT 0100- Some marks on the blade from use and the sheath. Some slight discoloration and a roll on the edge. Comes with original sheath with drop leg and thigh strap. I did put some gorilla tape on the kydex insert of the sheath to thumb press on the draw.
TRADE PENDING---CMFTW tanto - CTS-XHP micarta over red g10 and stainless pins. Some kydex marks on the blade and handling marks. I don’t think its cut anything, maybe a package or two. Comes with a kydex sheath with great retention and a large teklok.
Only pic I currently have of the titanium Rift scales. Other Benchmades are currently not available for trade.
U.S. only, 18+ only. Know your own local knife laws. Members with no or low feedback may be asked to ship first.
PM or email with questions and offers please.
I’m mostly interested in a large Sebenza 21 with inlays, Busse Ergo Public Defender, Spyderco G10 Dragonfly. I’m open to any knife offer though. Multiples or cash can go either way.
I’m also interested in non knife offers. Mostly guns, gun parts or Surefires(Aviator would be awesome). Any offer is welcome.
All knives have been used, some more than others.
Folders
ZT 0562CF M390- Used. In good condition with solid lockup and no blade play. Smooth flipping action. Centering slighty favors the lock side but not rubbing the liner. Some scratches on the blade from use. Some slight discoloration near the detent hole on the blade. Some slight wear on the spine from light scraping. Ti scale probably has some scratches/snail trails, mostly blends with the stonewashing. A couple dings and some scuffing in the carbon fiber along the edges. Some wear one the clip and hardware. Box included but no paperwork. Will be wrapped in a priority mail bag in the box.
ZT 0620CF Cts204P- Used. In good condition with solid lock up with no blade play. Smooth opener when, but doesn’t flip open very well. Centering slightly favors show side. Some scratches on the blade from use. Some scratches/snail trails in the Ti scale the mostly blends in with the stonewashing. Some scuffing in the carbon fiber. Some wear on the hardware and pocket clip. Comes with original pocket clip only. No box or paperwork.
Kershaw Skyline Bladeforums and Flytanium scales, and brown g10 scales- DOES NOT come with the original blue scales. Comes with original box. Please read description.
This one is a slight fixer upper. Pocket clip screws are fracked up good from my failed Dremel attempt to get them out. They stripped when I was putting the Ti scales on. Pocket clip holds the knife tight but it does wiggle a bit. Grip screw receiving end isn’t flush as it should be. One of the grip screws is a little stripped as well. There is a slight gap on the liner and the scale because of these. Some side to side play. Ever so slightly off center. Some snail trails on the TI and scratches on the blade. Brown scales are in good condition, some slight discoloration and G10 is not as grippy as it used to be. Carried it with these scales for awhile before the Ti scales. Not a collectors piece by any means, but even in it’s current condition it’s a great carry knife.
ZT 0450- Used in good condition. Centering is good, lockup is solid. Smooth flipping action. Snail trails on the Ti, scratches on the blade. Slight discoloration on the blade in one small spot, unsure of what it is. Edge was re-profiled and sharpened by previous owner. I don’t recall if I’ve touched up the edge on my Sharpmaker. Comes with box and papers.
Benchmade 950 Rift(Ti handled possibly)- Used in good condition. Centering slightly favors one side. Lockup is pretty solid. Smooth action. Scratches on the blade. Some rust is starting around the thumbstud and by the spine. Some dings in the G10. Hardware, clip and liners show some wear. There is some rust on the liners.
Ripps garage Tech Titanium handle scales for the Rift can be included or traded separately. They’ve been anodized light blue. A couple of snail trails on the Ti. They are slightly thicker than stock and a bit heavier. They add about an ounce and a half to the overall weight.
Spyderco Delica Titanium and Damascus- Used in good condition. Solid lockup. Centering slightly favors one side with no rubbing. Smooth opening but does not flick open. Scratches on the blade from use. Some dings in the spine above the hole. Not sure what they’re from. Snail trails in the handle. Knife only, no box or paperwork.
Spyderco Gayle Bradley 2- Used in pretty good condition. Solid lock up and smooth opening. Centering slightly favors non lock side. Scratches on blade from use. Chip in the blade about a .25in from tip. Some rust developing on blade. Some black residue on blade, honestly don’t remember what it was from. Some slight scuffs on handles and a small area of yellow discoloration on the back of the handle. Some rust on the inside of the handles. Knife only, no box or paperwork.
Fixed Blades- None of the fixed blades come with original boxes.
ZT0121- Used. In good condition. Scuffs(some are blue?) in the DLC from use and sheath. Some scuffs on the handles. Comes with original sheath and a custom. The originals retention is pretty loose but has the strap so it works. The strap is chewed up some from inserting the blade. The custom sheath has pretty good retention. Draws nicely but difficult to insert. Comes with a large teklok.
Bradshaw blades cord wrapped tanto 52100. This has been carried and used. I tried my hand at applying a forced patina using mustard. It’s overall pretty dark and kind of ugly imo. The blade is decently sharp but could use a touch up. Comes with a kydex sheath that’s a little loose and has few dings on the carbon fiber textured side
Jeff Baker S-Tac w/ Big Chris regrind- Bronze impregnated carbon fiber handles over bronze and black liners and bronze pins and lanyard tube. It's 1/8" CPM154 with a 3.5" blade and is 7.6 OAL. Very minor marks on the blade and handles. Comes with a very nice leather pocket sheath. Sheath has a scuff on the tooled side.
Backwoods Personal in 1095 and box elder burl handles. It has some file work and the spine and comes with a nicely tooled horizontal sheath. The knife has been carried and used some. Decently sharp, could use a touch up though. The blade has a few scratches and a fair amount of staining/patina. The sheath has a few dings in the leather. Retention is loose when not being worn, but when worn on the belt it tightens up nicely.
Leethal Cutlery wharncliff in W2 and black micarta handles. The scales are pretty marked up. More than I could capture in pictures. The blade has a solid amount of staining/patina. There also is a little bit of red rust I think right where the blade meets the handle scales. The convex edge is quite sharp, but has a few minor chips in the edge. This one comes with two kydex sheaths. A neck sheath and a belt sheath. Both have good retention. The belt sheath has a kydex belt loop attached to it. It will only fit about 1.25” belt, slim one at that. If you wear a belt designed to carry a firearm this more than likely will NOT fit.
Hinderer Flashpoint S35vn- Very lightly used. There are probably some kydex marks on the blade but can’t really tell with the stonewashing. Comes with a kydex sheath, very good retention.
GONE-----Becker 15-
----GONE
ZT 0100- Some marks on the blade from use and the sheath. Some slight discoloration and a roll on the edge. Comes with original sheath with drop leg and thigh strap. I did put some gorilla tape on the kydex insert of the sheath to thumb press on the draw.
TRADE PENDING---CMFTW tanto - CTS-XHP micarta over red g10 and stainless pins. Some kydex marks on the blade and handling marks. I don’t think its cut anything, maybe a package or two. Comes with a kydex sheath with great retention and a large teklok.
Only pic I currently have of the titanium Rift scales. Other Benchmades are currently not available for trade.
Last edited:
