For Brian: Sorry you have to wait until April 26th for yours!

k_estela

k_estela

Co-Moderator, Wilderness and Survival Skills Forum
Moderator
Joined
Feb 23, 2001
Messages
2,101
Just thought I'd post pictures of the knife Brian has to wait for. Don't worry buddy, the wait is well worth it!

MLKWeekendTrioofTools-1.jpg


WLCSchoolKnife.jpg


100_0080.jpg


Marty said he's bringing it to the CT Gathering for you. You sure you can wait that long? You'll have to take a course with us now!
 
You, sir, are evil. I knew it...from the moment I met you at Eastern Mountain Sports all those years ago. Torturer. This is worse than water-boarding.

Evil. Yes. YOU! :grumpy::mad: :p

However, this gorgeous PSK, Jr. from Scott Gossman has me happy-dancing around my place like I have a severe case of ADHD! Can't wait to get it out tomorrow for a little fun!

P.S. If you guys are swinging down through my town on the way to PWYP, and want an extra hand for the ride, let me know! I may be able to make it down there now! :thumbup:
 
Hey Kevin,
That Fox River looks a little different than the one shown on the WLC website. Solid pins, and it looks like the scales extend further toward the sharpened edge. Is this a custom job? Who do I talk to for one of these?
Dave
 
Seriously, can't wait to get this one. I've been eyeing the Fox River for awhile now, and then to hear that you and Marty like it as one of your favorite blades, that just sealed the deal for me! Plus, it's an extra bonus to have the school's logo on it!

~B.
 
I just picked up a fox river in a trade and my initial impression is it is "THE ONE" :D
That Gossman PSK is certainly a great knife to hold you over, though, Brian!
 
Brian Jones said:
P.S. If you guys are swinging down through my town on the way to PWYP, and want an extra hand for the ride, let me know! I may be able to make it down there now! :thumbup:
Click to expand...

Brian, that would be great! I'm looking forward to meeting everyone who does make it. This will be my first year at PWYP. My drive is a little less than yours, I live about 40 minutes from Chestnut Mtn. I only wish I could make Marty's class before it. :(

Think I'll post up a roll call thread for PWYP so we can get an idea of who will be there.
 
Raindog,

A while back, I contacted Mike Stewart about lengthening the handle slabs on a Northstar to make it CT legal. Over time, this process became known as the "New England" handle conversion. Basically, it makes the blade less than 4" from tip to the front of the handle slabs. I prefer it this way because it makes fine cutting, when choking up on the blade, very controllable. This knife excels at crafting and constructing wood tools and traps.

The Fox Rivers come with either solid or tubular pins. I prefer as little texture on handles as possible so I opt for solid pins. Both are super strong but it is my own personal preference.


Brian,

I wish I could make it to PWYP this year but it doesn't fall during my school's vacation schedule. I'll have plenty of time to prep the area for the CT gathering though since that is my vacation week. If you make it to PWYP, you'll want to go back every year! I'm ticked I have to miss it but I want to make the CT gathering every bit as much fun and informational for others. Be careful on the drive if you go.
 
Kevin, clue me in on the difference in scales; I can't see how those scales on your WLC River could be set back any further on the handle without ruining the looks of the knife?
 
1tracker,

Look towards the ricasso on mine versus a standard. The scales aren't set back, they are removed and replaced with a longer set that extends all the way to the plunge line. Usually there is a gap between the plunge line and the tip of the handle slabs. With this conversion, there is hardly any gap and the handle becomes longer as the blade is technically shorter. I like this since I'm not fond of unsharpened steel. On large knives, choils are fine but I'd rather have an extra 1/2" of sharpened A2 steel than a "cool looking" choil. Sure, it has function but moving the handle up to the plunge line gives you more control that is more comfortable to use over an extended period of time.

Just my preference here.
 
Kevin,
I like it. Any idea what a conversion like this would cost, or should I email Mike for the details? I have a Fox River that I've grown quite fond of, and those slabs look like just the ticket. Thanks.
 
Your best bet is to E-mail Mike or give the shop a call. It has been a while since I've had mine done. You won't be sorry with the swap, I really like the performance this knife has now with fine cutting tasks. As much fun as battoning can be, I would sooner grab a few sticks and carve figure 4's like this one to demonstrate it's ability. Believe it or not, it is functional.

HPIM0785.jpg


Perfect for catching Lilliputians (sp?) or horse flies.
 
k_estela said:
Your best bet is to E-mail Mike or give the shop a call. It has been a while since I've had mine done. You won't be sorry with the swap, I really like the performance this knife has now with fine cutting tasks. As much fun as battoning can be, I would sooner grab a few sticks and carve figure 4's like this one to demonstrate it's ability. Believe it or not, it is functional.

HPIM0785.jpg


Perfect for catching Lilliputians (sp?) or horse flies.
Click to expand...

that is so cool!!!!!

is there a tutorial on making those? I am new to the W&SS stuff.

thanks,
brett
 
Brett,

That isn't a bad idea. Gives me someting to work on for the next time I'm out and about. I'll have one for you soon. In the mean time, check out some of the great primitive skills sites out there. Even though they can't compare to a person guiding you through the process first hand, it will give you and idea how to carve them. Don't get frustrated at first if it doesn't hold, a few modifications and it will work just fine.

p.s. if you come to the CT gathering, I'll gladly carve one with you or for you
 
k_estela said:
Brett,

That isn't a bad idea. Gives me someting to work on for the next time I'm out and about. I'll have one for you soon. In the mean time, check out some of the great primitive skills sites out there. Even though they can't compare to a person guiding you through the process first hand, it will give you and idea how to carve them. Don't get frustrated at first if it doesn't hold, a few modifications and it will work just fine.

p.s. if you come to the CT gathering, I'll gladly carve one with you or for you
Click to expand...

i will look for the tutorial. Please PM me when you do. I wish I could come to the CT get together. Unfortunately, Oklahoma's a ways away.

I have seen them in several survival shows but have always been mystified by them.

thanks for being willing to help a newbie.

Brett
 
Brian or anybody from heading down to PWYP and are passing though Maryland, you are welcome to stop by the shop. Just let me know when.
Scott
 
Brian,
Now You see what I have to go through with Perfect Kevin. Wait until you see his fireside demo's with the blue flame. He shocked a married couple last year and they haven't been heard from since.
Oldman/Marty
 
Marty,

Even though I haven't studied Sayoc Kali all that long, I am a master in wielding the "Blue dagger." Don't worry Brian, I'll perform on the CT gathering as long as I have mixture of broccoli, milk and beer in my stomach, maybe some vitamin C too.
 
You must log in or register to reply here.
Back
Top