- Joined
- Jan 27, 2018
- Messages
- 28
Knife descriptions and pics given below. All have been used at least once and handled or pocketed. I will gladly provide additional pictures on request, but if there is a defect, I have done my best to highlight it. Standard shipping via USPS provided with insurance to CONUS addresses, payment via PayPal G/S accepted. For sale only, no trades please.
1) SOLD Kizer Mini Sheepdog Ti. 2 5/8" blade on bearings, CPM S35VN with steel lockbar insert. Lightly handled and used with custom clip and bronzed screws. Still has factory edge, and no visible scratches or marks.
2) SOLD Spyderco Lil' Native 2.5" CPM S30V blade on PB washers, compression lock. The clip is bent upwards away from the frame a little. Blade has factory edge and perfect centering.
3) $500 CKF Fif20. 3.35" M390 hand rubbed satin-finish blade on bearings, steel lockbar insert. Purchased for $620 from Fort Henry Custom Knives, includes new replacement hardware and clip. The action on this is the best of any knife I have ever handled, there is no blade play, lock up and centering are perfect. This is an absolutely phenomenal knife and I have carried and used it. There are several small snail trails on the bolsters and a hairline scratch on the blade. I had to get the angle just right to get the sun to reflect it, but it is not clearly visible at most angles. There are visible scratches on the clip, the second clip is in new and unused. Given the value of this knife relative to the others listed here, please check each picture carefully before you purchase. Although the defects are slight, I have done my best to highlight them and capture them in these pictures. I will provide more on request.
Scratches visible above in sunlight at the right angle. See pics below as well for comparison.
Scratches on clip visible above.
4) SOLD-++ Production Shamwari by WE knives, 3" CPM20CV blade on ceramic bearings. The detent is perfect in my opinion, this has not been modified. Light scratches on the blade, see pictures below. Carried and used, and there are slight wear marks on the clip and scales. The scales are tumbled, so I'm not sure if the marks are 'mine' or if they came that way.
Now, If you're still here, I feel like we've been through a lot together. I love knives and while all of these are great, I don't necessarily have a connection to these and I hope they find a good home. I have absolutely done my best to show anything I could see during a close visual inspection and point it out, because I want you to be happy with your purchase and I expect the same candor from other sellers in this group.
1) SOLD Kizer Mini Sheepdog Ti. 2 5/8" blade on bearings, CPM S35VN with steel lockbar insert. Lightly handled and used with custom clip and bronzed screws. Still has factory edge, and no visible scratches or marks.
2) SOLD Spyderco Lil' Native 2.5" CPM S30V blade on PB washers, compression lock. The clip is bent upwards away from the frame a little. Blade has factory edge and perfect centering.
3) $500 CKF Fif20. 3.35" M390 hand rubbed satin-finish blade on bearings, steel lockbar insert. Purchased for $620 from Fort Henry Custom Knives, includes new replacement hardware and clip. The action on this is the best of any knife I have ever handled, there is no blade play, lock up and centering are perfect. This is an absolutely phenomenal knife and I have carried and used it. There are several small snail trails on the bolsters and a hairline scratch on the blade. I had to get the angle just right to get the sun to reflect it, but it is not clearly visible at most angles. There are visible scratches on the clip, the second clip is in new and unused. Given the value of this knife relative to the others listed here, please check each picture carefully before you purchase. Although the defects are slight, I have done my best to highlight them and capture them in these pictures. I will provide more on request.
Scratches visible above in sunlight at the right angle. See pics below as well for comparison.
Scratches on clip visible above.
4) SOLD-++ Production Shamwari by WE knives, 3" CPM20CV blade on ceramic bearings. The detent is perfect in my opinion, this has not been modified. Light scratches on the blade, see pictures below. Carried and used, and there are slight wear marks on the clip and scales. The scales are tumbled, so I'm not sure if the marks are 'mine' or if they came that way.
Now, If you're still here, I feel like we've been through a lot together. I love knives and while all of these are great, I don't necessarily have a connection to these and I hope they find a good home. I have absolutely done my best to show anything I could see during a close visual inspection and point it out, because I want you to be happy with your purchase and I expect the same candor from other sellers in this group.
Last edited:
