- Joined
- Feb 15, 2014
- Messages
- 632
For Sale or trade
6 medium to high end production folders
These are going to be listed extremely cheaply because I have some other debt I need to pay off right away.
1. Brown Lego SNG with S30V , 3/4 grind, new linear lock interface and rock solid lock up. The blade is perfectly centered and lock up is right in the middle.
I'm asking $old
2. Black Lego SNG with a full flat ground blade, new linear lock interface, solid lock up, the blade can be perfectly centered depending on how tight the pivot is (I have not set this. It does not have Loctite on it) and the lock bar is right in the middle where it should be.
This knife has a bit of a sticky lock. This is a good indicator of how few times it has been opened and closed. I've never seen a Strider knife that didn't have a sticky lock when it was brand new.
I'm asking $old
3. ZT 0550
Here is a knife that was customized by Eric Yakush (Shephard Custom Concealment). This particular knife has a contoured Red Shred carbon fiber scale, the lock side has been antiqued and the blade has been acid stone washed and has had a finger choil installed.
This knife has an S35VN blade which is perfectly centered. The lock up on this knife is rock solid and the lock bar is right where it should be.
I'm asking $old
4. Mint Spyderco Rubicon (with lock relief modification done by @darkrazorsharp) (a very small area sanded out of the carbon fiber scale on the side opposite the lock bar in order to disengage the lock much easier)
I am asking $300 CAD shipped.
5. Green aluminum HTM Gunhammer Maxx bearings
This knife has a DLC coated CTS-XHP blade that is perfectly centered, was sharpened by Eric Yakush and also has a finger choil in the blade. This knife is very smooth and the blade actually falls shut on its own. This thing is a wicked flipper.
I am asking $old CAD shipped.
6. Here is another HTM Gunhammer Maxx in black with a Bowie blade in S30V. This knife is also a wicked flipper but does not fall shut on its own weight like the green one. The blade is perfectly centered. I bought this knife brand new and I should have sent it back when I bought it instead of taking a big loss now there is a chip out of the blade which is shown in my picture. This chip could be sharpened out no problem. My price will reflect this imperfection.
I am asking $old CAD shipped
All these prices are net to me. I will accept paypal and I will also accept EMT.
For PayPal send to alligatorgarfish-at-gmail-dot-com and EMT to svensharkey-at-gmail-dot-com
All these packages will be shipped via Express Post in Canada which comes with $100 insurance. Will ship to the USA for an additional $10 CAN
Thanks a lot for looking. Please email me, private message me, or just reply to this thread.
6 medium to high end production folders
These are going to be listed extremely cheaply because I have some other debt I need to pay off right away.
1. Brown Lego SNG with S30V , 3/4 grind, new linear lock interface and rock solid lock up. The blade is perfectly centered and lock up is right in the middle.
I'm asking $old
2. Black Lego SNG with a full flat ground blade, new linear lock interface, solid lock up, the blade can be perfectly centered depending on how tight the pivot is (I have not set this. It does not have Loctite on it) and the lock bar is right in the middle where it should be.
This knife has a bit of a sticky lock. This is a good indicator of how few times it has been opened and closed. I've never seen a Strider knife that didn't have a sticky lock when it was brand new.
I'm asking $old
3. ZT 0550
Here is a knife that was customized by Eric Yakush (Shephard Custom Concealment). This particular knife has a contoured Red Shred carbon fiber scale, the lock side has been antiqued and the blade has been acid stone washed and has had a finger choil installed.
This knife has an S35VN blade which is perfectly centered. The lock up on this knife is rock solid and the lock bar is right where it should be.
I'm asking $old
4. Mint Spyderco Rubicon (with lock relief modification done by @darkrazorsharp) (a very small area sanded out of the carbon fiber scale on the side opposite the lock bar in order to disengage the lock much easier)
I am asking $300 CAD shipped.
5. Green aluminum HTM Gunhammer Maxx bearings
This knife has a DLC coated CTS-XHP blade that is perfectly centered, was sharpened by Eric Yakush and also has a finger choil in the blade. This knife is very smooth and the blade actually falls shut on its own. This thing is a wicked flipper.
I am asking $old CAD shipped.
6. Here is another HTM Gunhammer Maxx in black with a Bowie blade in S30V. This knife is also a wicked flipper but does not fall shut on its own weight like the green one. The blade is perfectly centered. I bought this knife brand new and I should have sent it back when I bought it instead of taking a big loss now there is a chip out of the blade which is shown in my picture. This chip could be sharpened out no problem. My price will reflect this imperfection.
I am asking $old CAD shipped
All these prices are net to me. I will accept paypal and I will also accept EMT.
For PayPal send to alligatorgarfish-at-gmail-dot-com and EMT to svensharkey-at-gmail-dot-com
All these packages will be shipped via Express Post in Canada which comes with $100 insurance. Will ship to the USA for an additional $10 CAN
Thanks a lot for looking. Please email me, private message me, or just reply to this thread.
Last edited:
