- Joined
- Jan 20, 2013
- Messages
- 360
Hello everybody! I am getting back into Benchmade so I have to make some room to fund some new acquisitions. Most of these knives have been used and carried, however not abused. Prices include PayPal fees (G&S) and the cost of shipping via USPS. Since the post office is closed Monday, the earliest I will be able to ship is Tuesday depending on my work schedule (getting ready to go to the field). Apologies if the pictures do not show up right away. If you have any questions or want more pictures feel free to PM me or shoot an email to 22andrader@gmail.com.
First person to say, "l will take the **** gets the knife."
No trades at this time
Thanks BladeForums!
First up is two Endura lot, the first is an acid etched/stonewashed Endura 4 FFG which has been used and carried, all outer hardware has also been acid etched and sharpened. There is some spotting on the blade, not sure if it is rust since it's VG-10. The second Endura is an all black combo edge Endura 4 has been carried has not been sharpened, blade does show some wear on the coating where it is coming off a little bit. Both would make good users and I don't have any boxes. Take both for $75.
Next is a ZT 0750 which I bought off the forums a while ago, wasn't carried much by me. Not sure how much the previous owner carried it. Hasn't been sharpened by me. Has two very small rolled edge spots which can probably be fixed by someone who is good at sharpening and is ever so slightly off center. G10 shows wear, coating has held up pretty well. No box. Take it for $75. SOLD
Next is a Tiger Striped PE ZT 0350 blem, it has been carried and sharpened by me, I am the original owner. Hardware on the torx heads shows wear, as does G10, the blade coating has held up pretty well. Knife is centered with no play, has very small microchips that can also be fixed by someone who is good at sharpening. Take it for $85.
Next is a Tiger Striped PE ZT 0301 blem (the older version), has been carried and sharpened by me. I am the original owner. Some wear on the titanium side, pivot face, and pocket clip. There is wear on the blade at the spine were the coating has come off. Is a little slow to open but still does with the speed safe. Will make a good user. Take it for $135. SOLD
Next is a lot. Included is a Spyderco Delica 4 FFG black and satin no pocket clip, original edge and lightly carried. Also included is a Spyderco Salt 1 which has seen extensive carry in the ocean and use and has been sharpened many times and needs to be sharpened again. Pocket clip has no coating and the blade has been run over with sandpaper, edge has lots of life on it still. Not sure why but it squeaks when closed. Also included is a Gerber Evo Jr., and BW Kershaw Emerson CQC4K, blade rubs on liner, and one of the screws is stripped. Also included is a Leatherman Micro. Also, to freshen up the deal is a user black FRN Rat 1 acid etched and stonewashed, and a newer satin and black FRN Rat 2 with some wear on the pocket clip, and an ESEE Zancudo acid etched and stonewashed, is missing a body screw and pocket clip. Take them all for $110.
Lastly is a black DLC Spyderco PM2 which has been used carried and sharpened by me. I am the original owner, comes with Putman OD green honeycomb scales and an aluminum black back spacer, does come with a pocket clip. The reason I am selling it is because the very very tip of the blade is slightly crooked. (I have no idea how that happened). It doesn't seem to affect the cutting performance but it bugs me and knowing myself l will snap the tip if I try to fix it so I'm passing it along. Black hardware on knife looks good and DLC is intact but has surface wear. Stop pin is very dirty. I can throw in some factory black scales if you want but they will show wear. Take it for $130.
First person to say, "l will take the **** gets the knife."
No trades at this time
Thanks BladeForums!
First up is two Endura lot, the first is an acid etched/stonewashed Endura 4 FFG which has been used and carried, all outer hardware has also been acid etched and sharpened. There is some spotting on the blade, not sure if it is rust since it's VG-10. The second Endura is an all black combo edge Endura 4 has been carried has not been sharpened, blade does show some wear on the coating where it is coming off a little bit. Both would make good users and I don't have any boxes. Take both for $75.
Next is a ZT 0750 which I bought off the forums a while ago, wasn't carried much by me. Not sure how much the previous owner carried it. Hasn't been sharpened by me. Has two very small rolled edge spots which can probably be fixed by someone who is good at sharpening and is ever so slightly off center. G10 shows wear, coating has held up pretty well. No box. Take it for $75. SOLD
Next is a Tiger Striped PE ZT 0350 blem, it has been carried and sharpened by me, I am the original owner. Hardware on the torx heads shows wear, as does G10, the blade coating has held up pretty well. Knife is centered with no play, has very small microchips that can also be fixed by someone who is good at sharpening. Take it for $85.
Next is a Tiger Striped PE ZT 0301 blem (the older version), has been carried and sharpened by me. I am the original owner. Some wear on the titanium side, pivot face, and pocket clip. There is wear on the blade at the spine were the coating has come off. Is a little slow to open but still does with the speed safe. Will make a good user. Take it for $135. SOLD
Next is a lot. Included is a Spyderco Delica 4 FFG black and satin no pocket clip, original edge and lightly carried. Also included is a Spyderco Salt 1 which has seen extensive carry in the ocean and use and has been sharpened many times and needs to be sharpened again. Pocket clip has no coating and the blade has been run over with sandpaper, edge has lots of life on it still. Not sure why but it squeaks when closed. Also included is a Gerber Evo Jr., and BW Kershaw Emerson CQC4K, blade rubs on liner, and one of the screws is stripped. Also included is a Leatherman Micro. Also, to freshen up the deal is a user black FRN Rat 1 acid etched and stonewashed, and a newer satin and black FRN Rat 2 with some wear on the pocket clip, and an ESEE Zancudo acid etched and stonewashed, is missing a body screw and pocket clip. Take them all for $110.
Lastly is a black DLC Spyderco PM2 which has been used carried and sharpened by me. I am the original owner, comes with Putman OD green honeycomb scales and an aluminum black back spacer, does come with a pocket clip. The reason I am selling it is because the very very tip of the blade is slightly crooked. (I have no idea how that happened). It doesn't seem to affect the cutting performance but it bugs me and knowing myself l will snap the tip if I try to fix it so I'm passing it along. Black hardware on knife looks good and DLC is intact but has surface wear. Stop pin is very dirty. I can throw in some factory black scales if you want but they will show wear. Take it for $130.
Last edited:
