- Joined
- May 28, 2016
- Messages
- 108
"KWAL'AKAHSHOCHEET"
1/1 Forged custom drop point hunter by the brother Bo from Iron Medicine Blades. Forged from recycled scrap d2 tool steel bar. Water stone sharpened on 1000, 3000, and 8000 grit stones.
Knife comes with basic warrantee as well does the sheath
Asking Price is $1100 OBO delivered, Flat rate USPS Priority mail, Insured, tracking and delivery confirmation. Paypal payment preferred. CONUS ONLY. PM all offers.
SPECS
D2 tool steel
10" overall length
5 3/4" blade length
4 5/8" handle length
1 5/8" blade width
6mm thickness at handle
5mm thickness at blade
Full-tang blade
59 HRC temper
Spalted Maple burl handle
brass handle pins
Traditional fine brass pinwork
hand dyed and sealed deer rawhide and deer sinew sewn Sleeve-work
SHEATH
Hand molded to knife
Thick vegetable tanned cowhide
Naturally sealed
Belt loop can fit up to 1 3/4in belt width
Right hand, left side cross draw
"teypohs'keemeechpahtlahnee"
1/1 Forged custom clip point dueling knife by the brother Bo from Iron Medicine Blades. Forged from recycled scrap d2 steel with a heavier tang at 4mm and lighter 3mm drawn out blade, with the majority of the weight in the center of the handle to maximize the ease and speed of tip directional movement and parrying. Coupled with a custom low top sheath with perfectly balanced tight blade retention makes for fast, easy, silent, quick draws, and draw strikes. Water stone sharpened on 1000, 3000, and 8000 grit stones.
Knife comes with basic warrantee as well does the sheath
Asking Price is $1100 OBO delivered, Flat rate USPS Priority mail, Insured, tracking and delivery confirmation. Paypal payment preferred. CONUS ONLY. PM all offers.
KNIFE SPECS
9 1/2" overall length
Recycled D2 steel
5" blade length
4 1/4" handle length
1 5/16" blade width
4mm thickness at tang
3mm thickness at blade
Full-tang blade
58-60 HRC temper
Naturally sealed Spalted Maple Burl handle
Solid brass handle pins
Traditional fine brass pinwork
Naturally sealed deer rawhide and deer sinew sewn Sleeve-work
Makers mark down spine of handle
SHEATH
Thick vegetable tanned cowhide
Hand formed to blade
Naturally sealed deer rawhide entry sleeve
Fine hammered and hand stamped brass-work sheath frame and accents from recycled antique brass
Hand made hammer peened rivets from recycled brass
Naturally sealed
Belt loop can fit up to 1 1/2in belt width
Right hand, left side cross draw configuration
"tlahmahkahskah'mahtsahton"
1/1 Forged custom clip point fighter by the brother Bo from Iron Medicine Blades. Forged from a recycled piece of d2 tool steel. Water stone sharpened on 1000, 3000, and 8000 grit stones. Features a broomstick style handle and two 1/2in skull crushers at the butt end of the knife.
Knife comes with basic warrantee as well does the sheath
Asking Price is $1100 delivered OBO, Flat rate USPS Priority mail, Insured, tracking and delivery confirmation. Paypal payment preferred. CONUS ONLY. PM all offers.
Thank you for your time and consideration, all comments and discussion are appreciated.
KNIFE SPECS
11" overall length in sheath
10 1/4" overall knife length
5 1/2" blade length
4 1/2" handle length
1 10/16" blade width
5mm thickness at tang
4mm thickness at blade
Full-tang blade
58-60 HRC temper
Naturally sealed Spalted Maple Burl handle
Solid brass handle pins
Traditional fine brass pinwork
Naturally sealed deer rawhide and deer sinew sewn Sleeve-work
Makers mark down spine of handle
SHEATH
Thick vegetable tanned cowhide
Hand formed to blade
Fine hammered and hand stamped brass-work sheath frame and accents from recycled antique brass
Hand made hammer peened rivets from recycled brass
Naturally sealed
Belt loop can fit up to 1 1/2in belt width
Right hand, left side cross draw configuration
1/1 Forged custom drop point hunter by the brother Bo from Iron Medicine Blades. Forged from recycled scrap d2 tool steel bar. Water stone sharpened on 1000, 3000, and 8000 grit stones.
Knife comes with basic warrantee as well does the sheath
Asking Price is $1100 OBO delivered, Flat rate USPS Priority mail, Insured, tracking and delivery confirmation. Paypal payment preferred. CONUS ONLY. PM all offers.
SPECS
D2 tool steel
10" overall length
5 3/4" blade length
4 5/8" handle length
1 5/8" blade width
6mm thickness at handle
5mm thickness at blade
Full-tang blade
59 HRC temper
Spalted Maple burl handle
brass handle pins
Traditional fine brass pinwork
hand dyed and sealed deer rawhide and deer sinew sewn Sleeve-work
SHEATH
Hand molded to knife
Thick vegetable tanned cowhide
Naturally sealed
Belt loop can fit up to 1 3/4in belt width
Right hand, left side cross draw
"teypohs'keemeechpahtlahnee"
1/1 Forged custom clip point dueling knife by the brother Bo from Iron Medicine Blades. Forged from recycled scrap d2 steel with a heavier tang at 4mm and lighter 3mm drawn out blade, with the majority of the weight in the center of the handle to maximize the ease and speed of tip directional movement and parrying. Coupled with a custom low top sheath with perfectly balanced tight blade retention makes for fast, easy, silent, quick draws, and draw strikes. Water stone sharpened on 1000, 3000, and 8000 grit stones.
Knife comes with basic warrantee as well does the sheath
Asking Price is $1100 OBO delivered, Flat rate USPS Priority mail, Insured, tracking and delivery confirmation. Paypal payment preferred. CONUS ONLY. PM all offers.
KNIFE SPECS
9 1/2" overall length
Recycled D2 steel
5" blade length
4 1/4" handle length
1 5/16" blade width
4mm thickness at tang
3mm thickness at blade
Full-tang blade
58-60 HRC temper
Naturally sealed Spalted Maple Burl handle
Solid brass handle pins
Traditional fine brass pinwork
Naturally sealed deer rawhide and deer sinew sewn Sleeve-work
Makers mark down spine of handle
SHEATH
Thick vegetable tanned cowhide
Hand formed to blade
Naturally sealed deer rawhide entry sleeve
Fine hammered and hand stamped brass-work sheath frame and accents from recycled antique brass
Hand made hammer peened rivets from recycled brass
Naturally sealed
Belt loop can fit up to 1 1/2in belt width
Right hand, left side cross draw configuration
"tlahmahkahskah'mahtsahton"
1/1 Forged custom clip point fighter by the brother Bo from Iron Medicine Blades. Forged from a recycled piece of d2 tool steel. Water stone sharpened on 1000, 3000, and 8000 grit stones. Features a broomstick style handle and two 1/2in skull crushers at the butt end of the knife.
Knife comes with basic warrantee as well does the sheath
Asking Price is $1100 delivered OBO, Flat rate USPS Priority mail, Insured, tracking and delivery confirmation. Paypal payment preferred. CONUS ONLY. PM all offers.
Thank you for your time and consideration, all comments and discussion are appreciated.
KNIFE SPECS
11" overall length in sheath
10 1/4" overall knife length
5 1/2" blade length
4 1/2" handle length
1 10/16" blade width
5mm thickness at tang
4mm thickness at blade
Full-tang blade
58-60 HRC temper
Naturally sealed Spalted Maple Burl handle
Solid brass handle pins
Traditional fine brass pinwork
Naturally sealed deer rawhide and deer sinew sewn Sleeve-work
Makers mark down spine of handle
SHEATH
Thick vegetable tanned cowhide
Hand formed to blade
Fine hammered and hand stamped brass-work sheath frame and accents from recycled antique brass
Hand made hammer peened rivets from recycled brass
Naturally sealed
Belt loop can fit up to 1 1/2in belt width
Right hand, left side cross draw configuration