Horsewright
Knifemaker / Craftsman / Service Provider
- Joined
- Oct 4, 2011
- Messages
- 13,899
Up for sale today are four of my EDC type knives. All blades are AEB-L at 62RC with heat treat and cryo by Peter's. These knives are ground thin for excellent slicing ability and the AEB-L with this heat treat provides a razor sharp, long lasting edge that is easy to resharpen. All four blades have been finished with a Scothbrite belt finish for long lasting durable good looks. Each knife comes with a premium leather sheath constructed of Wickett and Craig saddle leather. Each sheath has been fitted and wet molded to that specific knife for excellent retention.
Knife #1:
This offering is my Paisano model. It is 6.5" in overall length with a 2.5" full, flat ground blade. A double vine filework pattern is on the spine of the blade. A brass bolster with a red spacer separates the blade from the handle of sheep horn with black liners. This knife comes with one of my Pancake sheaths that has been hand carved in an oak leaf pattern. This sheath is designed for right hand cross draw and is worn either above the left front pocket or on the left hip.
The Paisano in its oak carved sheath:
The Paisano:
My poor attempt at catching a pic of the filework for ya:
Price: $325.00
Shipping: Buyer pays actual shipping and insurance. We prefer Fed Ex. But if they don't work for ya we can ship UPS or USPS too.
Payment: We can invoice you through PayPal or can handle CC over the phone. We will ship internationally but will only invoice with PayPal for international orders.
The first "I'll take it", gets it.
Knife #2:
The Cowboy with Exhibition Grade Turkish Walnut. This Cowboy model is 6.5" over all in length and has a 2 5/8" blade. The blade is a full flat grind and there is a brass bolster and black spacers. The handle is Exhibition Grade Turkish Walnut that has been finished in about 10 coats of Danish Oil. The grain has been partially left open for a pleasing look. Interesting back story on this walnut. It is stock cut offs from custom rifle maker Butch Searcy of The American Double Rifle Co. I traded him out of a few boxes of his stock cut offs a few years ago. This Cowboy comes with a right hand cross draw Pancake sheath that has been hand tooled in a Carlos Border stamp. It is to be worn above the left front pocket or on the left hip.
The Cowboy in its Pancake sheath with Carlos Border stamping:
The Cowboy:
Price: $250.00
Shipping: Buyer pays actual shipping and insurance. We prefer Fed Ex. But if they don't work for ya we can ship UPS or USPS too.
Payment: We can invoice you through PayPal or can handle CC over the phone. We will ship internationally but will only invoice with PayPal for international orders.
The first "I'll take it", gets it.
Knife #3
The Stainless Gordo in elk. It has an overall length of 5 3/8 inches, with a blade length of 2 inches. Despite its small size, this knife is comfortable in even the largest hands. The blade is a full flat ground and it is handled in elk. This knife has a brass bolster with black spacers that separate the blade from the handle. It comes with a unique cross draw sheath, (right hand) that I make only for my Gordo model. Oddly enough, this I call the Gordo sheath. It has a border stamp tooling and the sheath rides horizontally on the belt above the left front pocket. This is the EDC you've been looking for. The one that you just forget ya have on.
The Stainless Gordo in elk in its Gordo Sheath:
The Stainless Gordo:
Price: $235.00
Shipping: Buyer pays actual shipping and insurance. We prefer Fed Ex. But if they don't work for ya we can ship UPS or USPS too.
Payment: We can invoice you through PayPal or can handle CC over the phone. We will ship internationally but will only invoice with PayPal for international orders.
The first "I'll take it", gets it.
Knife #4 SOLD
The Cowboy with sheep horn. The Cowboy model is 6.5" over all in length and has a 2 5/8" blade. The blade is a full flat grind and there is a brass bolster with yellow and green spacers spacers. The handle is sheep horn with red liners. The horn has polished up with a translucency that gives a pleasing red tint to some areas of the handle. This knife comes with a plain Pancake Sheath that has not been tooled. It is to be worn above the left front pocket or on the left hip and is for right hand cross draw.
The Cowboy in its plain Pancake Sheath:
The Cowboy with sheep horn:
Price: Knife #4 Sold
Shipping: Buyer pays actual shipping and insurance. We prefer Fed Ex. But if they don't work for ya we can ship UPS or USPS too.
Payment: We can invoice you through PayPal or can handle CC over the phone. We will ship internationally but will only invoice with PayPal for international orders.
The first "I'll take it", gets it.
The knives:
The knives in their sheaths:
Thanks for looking and questions and comments are always welcome
Knife #1:
This offering is my Paisano model. It is 6.5" in overall length with a 2.5" full, flat ground blade. A double vine filework pattern is on the spine of the blade. A brass bolster with a red spacer separates the blade from the handle of sheep horn with black liners. This knife comes with one of my Pancake sheaths that has been hand carved in an oak leaf pattern. This sheath is designed for right hand cross draw and is worn either above the left front pocket or on the left hip.
The Paisano in its oak carved sheath:
The Paisano:
My poor attempt at catching a pic of the filework for ya:
Price: $325.00
Shipping: Buyer pays actual shipping and insurance. We prefer Fed Ex. But if they don't work for ya we can ship UPS or USPS too.
Payment: We can invoice you through PayPal or can handle CC over the phone. We will ship internationally but will only invoice with PayPal for international orders.
The first "I'll take it", gets it.
Knife #2:
The Cowboy with Exhibition Grade Turkish Walnut. This Cowboy model is 6.5" over all in length and has a 2 5/8" blade. The blade is a full flat grind and there is a brass bolster and black spacers. The handle is Exhibition Grade Turkish Walnut that has been finished in about 10 coats of Danish Oil. The grain has been partially left open for a pleasing look. Interesting back story on this walnut. It is stock cut offs from custom rifle maker Butch Searcy of The American Double Rifle Co. I traded him out of a few boxes of his stock cut offs a few years ago. This Cowboy comes with a right hand cross draw Pancake sheath that has been hand tooled in a Carlos Border stamp. It is to be worn above the left front pocket or on the left hip.
The Cowboy in its Pancake sheath with Carlos Border stamping:
The Cowboy:
Price: $250.00
Shipping: Buyer pays actual shipping and insurance. We prefer Fed Ex. But if they don't work for ya we can ship UPS or USPS too.
Payment: We can invoice you through PayPal or can handle CC over the phone. We will ship internationally but will only invoice with PayPal for international orders.
The first "I'll take it", gets it.
Knife #3
The Stainless Gordo in elk. It has an overall length of 5 3/8 inches, with a blade length of 2 inches. Despite its small size, this knife is comfortable in even the largest hands. The blade is a full flat ground and it is handled in elk. This knife has a brass bolster with black spacers that separate the blade from the handle. It comes with a unique cross draw sheath, (right hand) that I make only for my Gordo model. Oddly enough, this I call the Gordo sheath. It has a border stamp tooling and the sheath rides horizontally on the belt above the left front pocket. This is the EDC you've been looking for. The one that you just forget ya have on.
The Stainless Gordo in elk in its Gordo Sheath:
The Stainless Gordo:
Price: $235.00
Shipping: Buyer pays actual shipping and insurance. We prefer Fed Ex. But if they don't work for ya we can ship UPS or USPS too.
Payment: We can invoice you through PayPal or can handle CC over the phone. We will ship internationally but will only invoice with PayPal for international orders.
The first "I'll take it", gets it.
Knife #4 SOLD
The Cowboy with sheep horn. The Cowboy model is 6.5" over all in length and has a 2 5/8" blade. The blade is a full flat grind and there is a brass bolster with yellow and green spacers spacers. The handle is sheep horn with red liners. The horn has polished up with a translucency that gives a pleasing red tint to some areas of the handle. This knife comes with a plain Pancake Sheath that has not been tooled. It is to be worn above the left front pocket or on the left hip and is for right hand cross draw.
The Cowboy in its plain Pancake Sheath:
The Cowboy with sheep horn:
Price: Knife #4 Sold
Shipping: Buyer pays actual shipping and insurance. We prefer Fed Ex. But if they don't work for ya we can ship UPS or USPS too.
Payment: We can invoice you through PayPal or can handle CC over the phone. We will ship internationally but will only invoice with PayPal for international orders.
The first "I'll take it", gets it.
The knives:
The knives in their sheaths:
Thanks for looking and questions and comments are always welcome
Last edited:
