Four knives, edc, bushcraft, skinning

Status
Not open for further replies.
Feedback: +11 / =0 / -0
Joined
Feb 13, 2011
Messages
212
$SOLD PayPal or money order.
Elmax and African Blackwood with heartwood inclusion (see pic) smooth satin finish on handle, brass pins and a mosaic pin. Bright satin finishblade. Flat ground. Handle is big round and heavy. Thumb grooves in handle for sideways work. OAL 8 inches with 3.5 inch cutting edge. Hand sewn leather sheath mottled antique finish.

Please note the blem. It’s got a small crack at the mosaic as pictured. Hard wood so it will likely never go anywhere. If it does I’ll work with you to make it right. I’m that confident.
IMG_1569.JPG IMG_1570.JPG IMG_1571.JPG IMG_1572.JPG IMG_1573.JPG
 
Last edited:
$100 PayPal or money order.

cpm154cm and merino sheep horn scales. 3/16 thick, 7 3/8 long, 3 inch cutting edge. Approximately HRC 61. Merino sheep horn with distinct sides (not matching). Brass tubes and a mosaic. Great skinner that sits so well in the hand. Surprisingly well, given its short length. Deeply hollow ground. Bright brushed finish. Leather sheath dyed USMC black.

Note blemish: Small etch mark around stencil. Can be seen at handle just above my mark in the pic. It’s minor but still, full disclosure.
IMG_1577.JPG IMG_1574.JPG IMG_1575.JPG IMG_1576.JPG
 
Last edited:
$100 PayPal or money order.
Made to be used!
Elmax 3/16” thick with fully tapered tang. 8 5/16” long with 4” cutting edge. Small understated serrations. Hollow ground. Bright brushed finish. Desert Ironwood with slight palm swell and brass pins. Heavy but balanced at the forefinger. Jantz sheath kit but hand sewn with brass rivet for belt loop. Dyed bison brown.

Note blemish: etch stencil line in hollow ground area. Visible in pics.
IMG_1578.JPG IMG_1579.JPG IMG_1580.JPG IMG_1581.JPG IMG_1582.JPG
 
Last edited:
$60 PayPal or money order.
Made to be an ultralight hunting/ caping knife for myself. Good edc if wanting something small and light.

3/32" 440c, 7” long and 2 7/8” cutting edge. Flat ground with bright brushed finish. Nickle silver tubes hold stabilized buckeye burl to the tang. Burl is not book matched and each side is distinct. Thumbrest is shallow and rounded. Hand sewn 8 ounce horse leather sheath. Dyed brown.
IMG_1583.JPG IMG_1584.JPG IMG_1585.JPG IMG_1586.JPG
 
Last edited:
PM sent on the 440c caping knife!
 
Hey guys, I realize the pics are terrible so I can take a pic for you and text it to you. Helps too if there is something specific you want to see about one.
 
Status
Not open for further replies.
Back
Top