Free Rein vs. TNT-15 comparison photos

SpyderPhreak

SpyderPhreak

Rocketman for hire
Platinum Member
Joined
Apr 13, 2004
Messages
17,006
Can’t believe nobody else has done this yet. Here are some comparison shots between these two ‘Kin short swords. They are pretty similar, yet very different.

First, a few specs, as measured by me:

Free Rein:
21.34oz (605g)
0.214” thick (5.4mm)
16 3/32” long (408.8mm)
Stonewashed finish

TNT-15:
22.86oz (648 g)
0.247” thick (6.3mm)
15 1/8” long (384.2mm)
Competition Finish

When held with the handles on the same plane, I measure the height difference in the tips at just a hair under 1” different. The Free Rein has a good bit more sweep to the blade.

For these pictures, I put the handles as close to parallel as humanly possible (I used a 2x4 to space them). Anything that looks like they’re not parallel is camera perspective making it look off. Hopefully this helps some folks understand the differences between these two.

61AA1436-4969-413E-80FA-311240D060E5.jpeg

E1B2A5DE-0BED-4981-9E45-A66377FF2DE4.jpeg

E3864880-9DF7-4162-9460-6453E113380D.jpeg

BADFC72E-18BA-4424-BF04-64DCDDD356D8.jpeg

C4232873-3C31-4046-9C77-0AF3AF2B6382.jpeg
BB395B13-BDF2-4B8E-9152-5F05C372DAEB.jpeg

2B7C0594-2379-4456-9385-D911DD445ABE.jpeg
 
Last edited:
fishface5 said:
Have TNT so did not spring for the FR, but ooh that sexy curve . . .
Click to expand...
Had the tnt.
it wasn't for me.
The chunky "grind angles" just weren't made for using.

I hope the OP uses them both for an honest review/comparison.
the New one looks to be an improvement. Maybe better at chopping.
 
Nice thanks for the pics.
 
SpyderPhreak said:
Can’t believe nobody else has done this yet. Here are some comparison shots between these two ‘Kin short swords. They are pretty similar, yet very different.

First, a few specs, as measured by me:

Free Rein:
21.34oz (605g)
0.214” thick (5.4mm)
16 3/32” long (408.8mm)
Stonewashed finish

TNT-15:
22.86oz (648 g)
0.247” thick (6.3mm)
15 1/8” long (384.2mm)
Competition Finish

When held with the handles on the same plane, I measure the height difference in the tips at just a hair under 1” different. The Free Rein has a good bit more sweep to the blade.

For these pictures, I put the handles as close to parallel as humanly possible (I used a 2x4 to space them). Anything that looks like they’re not parallel is camera perspective making it look off. Hopefully this helps some folks understand the differences between these two.

View attachment 2138219

View attachment 2138218

View attachment 2138216

View attachment 2138215

View attachment 2138209
View attachment 2138208

View attachment 2138206
Click to expand...
HUGE BURR on the Free Rain edge.
 
Last edited:
On a second look, it might just be the camera and lighting playing tricks. Cuz the tnt seems to have the same thing in certain pics.
 
I decided to be a grown-up / tight-wad [delete as appropriate] when these first came out, and didn't order. But given that they did exactly what I'd asked (thinner stock, fuller, better steel), it seemed churlish not to get one. So, I've just ordered. A lower price would've eased the process.
 
Brummie said:
I decided to be a grown-up / tight-wad [delete as appropriate] when these first came out, and didn't order. But given that they did exactly what I'd asked (thinner stock, fuller, better steel), it seemed churlish not to get one. So, I've just ordered. A lower price would've eased the process.
[/QUOTE h
Click to expand...
 
Brummie said:
I decided to be a grown-up / tight-wad [delete as appropriate] when these first came out, and didn't order. But given that they did exactly what I'd asked (thinner stock, fuller, better steel), it seemed churlish not to get one. So, I've just ordered. A lower price would've eased the process.
Click to expand...
Very nice, i hope you enjoy it as much as I'm enjoying mine. And sorry about the last post. I dont know what happened lol.
 
You must log in or register to reply here.
Back
Top