Thank you as always for all the support! Here is the recent batch I just finished up. I have chosen to make a change in my steel selection per popular request. This batch is all from 1/8” CPM 154 with hammer textured flats or O-1 with heat treat/etch finish. Prices include a basic handmade sheath (this is a courtesy and not reflected in price) and shipping CONUS. Hope you enjoy!!!!
First "i'll take it" format.
I apologize for the cell phone pics, camera is down at the moment.
I have not put an edge on these yet, I put the secondary edge/sharpen on just before it goes out the door. Any spots in the grind are dust and such.
Paypal preferred, but I can do credit/debit over the phone, just pm me.
First Group is CPM 154:
Four nice Bush Adders this time with a nice variety of handle materials and colors. All feature a tapered tang and a few have file work on the spine.
Bush Adder 1:
Features nice natural stabilized mango scales over lime green G10 and natural canvas liners. Copper thong hole. $230
Bush Adder 2:
Gorgeous stabilized buckeye burl on this baby with red and blue G10 liners. High grind line on this one which makes for the best possible slicer. Micarta thong hole and file work on the spine. $270
Bush Adder 3:
Baby Blue! Very nice set of stabilized figured maple in a beautiful blue dye over red and opaque G10 liners. Micarta pins and thong hole with file work along the spine. $260
Bush Adder 4:
Nice set of camel bone scales with orange and black G10 liners. Micarta pins and thong hole with file work along the spine. SOLD
First two of the new “Canebrake” model. Based off the design of the Bush Adder, just in a slightly smaller package. OAL of 7 ¼” with a 3” cutting edge. Great for skinning, bush, or EDC.
Canebrake 1:
Nice set of sambar stag scales on top of orange G10 liners. Buckeye burl bolsters and micarta pins. Full thickness on the tang. SOLD
Canebrake 2:
Another set of nice sambar scales wrapping black and yellow G10 liners. Micarta pins and a copper thong hole, with buckeye burl wood bolsters. SOLD
Last but not least, the new “Kodiak”. OAL 9” with a 4 1/8” cutting edge.
Kodiak 1:
Beautiful stabilized cherry scales over a very nice contrasting set of lime green and yellow G10 liners. Micarta pins. This particular model has a swedge and is not the standard for this model. You will notice in the top view pics, I ground a bit to deep and the upper forward pins are visible. This will not effect the performance, however I know many folks won’t particularly care for the “eyes” that formed. I will discount this one $40 for the oops. Final price $220
Second set is O-1:
**New Model**
“Osprey”
10 ½” OAL with a 5 ¼” cutting edge. Nice set of dyed/stabilized spalted maple scales over blue and black G10 liners. Natural micarta pins. $265
“Bush Adder”
Nice color mix on this one. Natural linen micarta bolsters with brown canvas micarta scales. Brown micarta and opaque G10 liners with micarta pins and thong hole. File work along the spine. $230
**New Model**
“Muskrat”
8 1/8” OAL with a cutting edge of 3 ½”. Stabilized Mango wood scales over black and yellow G10 liners. Micarta pins and thong hole. $210
Last but not least,
“Canebrake”
Nice little Canebrake here with a sweet set of scales I made. Stabilized maple and box elder burl merged together in a nice pattern with cork spacer over red and opaque G10 liners. Micarta pins and thong hole. $215
Be sure to stop by my hosted forum here time to time and see what is new! Thank you for all of your support!
Allen
WAS Knives
First "i'll take it" format.
I apologize for the cell phone pics, camera is down at the moment.
I have not put an edge on these yet, I put the secondary edge/sharpen on just before it goes out the door. Any spots in the grind are dust and such.
Paypal preferred, but I can do credit/debit over the phone, just pm me.
First Group is CPM 154:
Four nice Bush Adders this time with a nice variety of handle materials and colors. All feature a tapered tang and a few have file work on the spine.
Bush Adder 1:
Features nice natural stabilized mango scales over lime green G10 and natural canvas liners. Copper thong hole. $230
Bush Adder 2:
Gorgeous stabilized buckeye burl on this baby with red and blue G10 liners. High grind line on this one which makes for the best possible slicer. Micarta thong hole and file work on the spine. $270
Bush Adder 3:
Baby Blue! Very nice set of stabilized figured maple in a beautiful blue dye over red and opaque G10 liners. Micarta pins and thong hole with file work along the spine. $260
Bush Adder 4:
Nice set of camel bone scales with orange and black G10 liners. Micarta pins and thong hole with file work along the spine. SOLD
First two of the new “Canebrake” model. Based off the design of the Bush Adder, just in a slightly smaller package. OAL of 7 ¼” with a 3” cutting edge. Great for skinning, bush, or EDC.
Canebrake 1:
Nice set of sambar stag scales on top of orange G10 liners. Buckeye burl bolsters and micarta pins. Full thickness on the tang. SOLD
Canebrake 2:
Another set of nice sambar scales wrapping black and yellow G10 liners. Micarta pins and a copper thong hole, with buckeye burl wood bolsters. SOLD
Last but not least, the new “Kodiak”. OAL 9” with a 4 1/8” cutting edge.
Kodiak 1:
Beautiful stabilized cherry scales over a very nice contrasting set of lime green and yellow G10 liners. Micarta pins. This particular model has a swedge and is not the standard for this model. You will notice in the top view pics, I ground a bit to deep and the upper forward pins are visible. This will not effect the performance, however I know many folks won’t particularly care for the “eyes” that formed. I will discount this one $40 for the oops. Final price $220
Second set is O-1:
**New Model**
“Osprey”
10 ½” OAL with a 5 ¼” cutting edge. Nice set of dyed/stabilized spalted maple scales over blue and black G10 liners. Natural micarta pins. $265
“Bush Adder”
Nice color mix on this one. Natural linen micarta bolsters with brown canvas micarta scales. Brown micarta and opaque G10 liners with micarta pins and thong hole. File work along the spine. $230
**New Model**
“Muskrat”
8 1/8” OAL with a cutting edge of 3 ½”. Stabilized Mango wood scales over black and yellow G10 liners. Micarta pins and thong hole. $210
Last but not least,
“Canebrake”
Nice little Canebrake here with a sweet set of scales I made. Stabilized maple and box elder burl merged together in a nice pattern with cork spacer over red and opaque G10 liners. Micarta pins and thong hole. $215
Be sure to stop by my hosted forum here time to time and see what is new! Thank you for all of your support!
Allen
WAS Knives
Last edited:
