Hello!
With hardly any space left for customs, I am finally starting to sell all of my production knives (folders and fixed blades alike; with the exception of a few beaten users). Here is the first batch of folders.
What you see in the images for each knife is what you get, nothing more, nothing less - unless otherwise noted, all are uncarried and unsharpened as well as unused.
All prices are net to me (add +3% when using paypal). Shipping within the EU is included. Shipping with the postal service (the best way I have found for folders) to the US and most other countries is 10 US Dollar net to me on top of the respective price given for each knife. If you want to use a courrier service such as FedEx, you will have to pay the actual shipping costs I would have to determine in each case.
Most images should offer large file sizes if you open them seperately. I can send more images upon request.
1: Cold Steel Talwar (old) from the CS-Custom Series - long been discontinued, rare to find one listed.
With VG-1 San Mai III blade, blade 3 3/4", overall 9 1/2". Has a few very fine superficial storage marks. Nothing that shows up in a photo, but a few tiny rub spots that can be seen from ceratin angles in certain light when looking really close. Others would advertise as dead mint (bought from them as well!), I won't.
400 US Dollars - NOW 350 US Dollars
---
2: Lionsteel TiSpine - polished bronze titanium, satin, 3.35" blade, 7,68" overall - flawless, not a single mark visible to my eye
260 US Dollars - NOW - 210 US Dollars
---
3: Lionsteel SR1A OB - orange aluminum, D2 blade, aluminum handle , satin, 3.70" blade, 8.31" overall - flawless, not a single mark visible to my eye
160 US Dollar
---
4: Limited edition Bradley Alias II with Damascus blade - have not seen one around in quite some time. This one is in the very condition I received it in from the dealer I bought from years ago. Never been carried, sharpened or cut anything (except for silly newspaper test-pages...).
It has a few of the faintest of pin-point storage rub marks on the frame and thumb-stud - too lightly rubbed to really show in images.
Oh, and the Ti-frame is actually slightly more of a blue than these images would suggest. Original box is included (shows some wear - it came that way).
290 US Dollars - NOW - 210 US Dollars
(note: I did remove the serial number from the blade in photoshop!)
Sizing reference only:
---
5: Mission MFK - all Ti-Version (frame and blade). It is in the condition I received it from the dealer I bought from years ago.
290 US Dollars - NOW 220 US Dollars
---
6: Jim Burke Titanium Runt, framelock with 154CM blade. In the condition I bought it in. Flawless. Comes with a small pouch.
SOLD
Size comparison only:
---
7: Fox Anso Titanium Linerlock Flipper. In the condition I bought it in. No visible marks. Comes with a small pouch.
150 US Dollars
---
8: Benchmade 790 Subrosa Ti, spring assisted - 3.76" blade, 8.40" overall
200 US Dollars
---
9: Benchmade 760 Lum Tanto - never used - did come with a few faint streaks in the blade finish - to subtle to really show in an image, but can be seen from certain angles.
SOLD
---
Many more to be added later on.
---
You must be at least 21 years old to buy any knife. I will not sell to anyone under 21 years of age. Also, you must be legally allowed to buy, own, possess and import this knife according to whatever law/jurisdiction is applicable where you live/want to buy this knife from/want to have this knife shipped to. It is solely your own responsibility to check the current law/jurisdiction for the places stated in the previous sentence to make sure it is legal for you to buy, own, possess and import this knife prior to buying it.
I prefer shipping this within the EU (to buyers above 21 who meet all criteria as above), also because it means no additional tax/customs duty etc because I am selling out of Autria/EU. I will gladly discuss shipping outside the EU as well - it is your own responsibility to inform yourself about all possible additional costs (such as tax, duties etc) that may arrise when importing this knife to your country; also, the buyer alone is responsible for paying these additional costs - I am in no way responsible for any of these costs. From past experience I can say that there has never been tax/duties upon re-import to the US. I can not tell you if this is always the case though.
Also, I am released out of any obligation once the knife is handed over to the courrier - I will ship with tracking within the EU, if possible also outside the EU.
By buying this knife you state and declare that you have read and understood all terms and conditions above and agree to completely accept and fulfill them without exception and reservation. I will only sell this knife to you, if you guarantee that you meet all requirements stated above!
If you don't agree with all terms and conditions stated above, please don't even contact me about the knife - I can and will not sell to you.
Best,
Alex
With hardly any space left for customs, I am finally starting to sell all of my production knives (folders and fixed blades alike; with the exception of a few beaten users). Here is the first batch of folders.
What you see in the images for each knife is what you get, nothing more, nothing less - unless otherwise noted, all are uncarried and unsharpened as well as unused.
All prices are net to me (add +3% when using paypal). Shipping within the EU is included. Shipping with the postal service (the best way I have found for folders) to the US and most other countries is 10 US Dollar net to me on top of the respective price given for each knife. If you want to use a courrier service such as FedEx, you will have to pay the actual shipping costs I would have to determine in each case.
Most images should offer large file sizes if you open them seperately. I can send more images upon request.
1: Cold Steel Talwar (old) from the CS-Custom Series - long been discontinued, rare to find one listed.
With VG-1 San Mai III blade, blade 3 3/4", overall 9 1/2". Has a few very fine superficial storage marks. Nothing that shows up in a photo, but a few tiny rub spots that can be seen from ceratin angles in certain light when looking really close. Others would advertise as dead mint (bought from them as well!), I won't.
400 US Dollars - NOW 350 US Dollars
---
2: Lionsteel TiSpine - polished bronze titanium, satin, 3.35" blade, 7,68" overall - flawless, not a single mark visible to my eye
260 US Dollars - NOW - 210 US Dollars
---
3: Lionsteel SR1A OB - orange aluminum, D2 blade, aluminum handle , satin, 3.70" blade, 8.31" overall - flawless, not a single mark visible to my eye
160 US Dollar
---
4: Limited edition Bradley Alias II with Damascus blade - have not seen one around in quite some time. This one is in the very condition I received it in from the dealer I bought from years ago. Never been carried, sharpened or cut anything (except for silly newspaper test-pages...).
It has a few of the faintest of pin-point storage rub marks on the frame and thumb-stud - too lightly rubbed to really show in images.
Oh, and the Ti-frame is actually slightly more of a blue than these images would suggest. Original box is included (shows some wear - it came that way).
290 US Dollars - NOW - 210 US Dollars
(note: I did remove the serial number from the blade in photoshop!)
Sizing reference only:
---
5: Mission MFK - all Ti-Version (frame and blade). It is in the condition I received it from the dealer I bought from years ago.
290 US Dollars - NOW 220 US Dollars
---
6: Jim Burke Titanium Runt, framelock with 154CM blade. In the condition I bought it in. Flawless. Comes with a small pouch.
SOLD
Size comparison only:
---
7: Fox Anso Titanium Linerlock Flipper. In the condition I bought it in. No visible marks. Comes with a small pouch.
150 US Dollars
---
8: Benchmade 790 Subrosa Ti, spring assisted - 3.76" blade, 8.40" overall
200 US Dollars
---
9: Benchmade 760 Lum Tanto - never used - did come with a few faint streaks in the blade finish - to subtle to really show in an image, but can be seen from certain angles.
SOLD
---
Many more to be added later on.
---
Terms of Sale:
MUST READ
MUST READ
You must be at least 21 years old to buy any knife. I will not sell to anyone under 21 years of age. Also, you must be legally allowed to buy, own, possess and import this knife according to whatever law/jurisdiction is applicable where you live/want to buy this knife from/want to have this knife shipped to. It is solely your own responsibility to check the current law/jurisdiction for the places stated in the previous sentence to make sure it is legal for you to buy, own, possess and import this knife prior to buying it.
I prefer shipping this within the EU (to buyers above 21 who meet all criteria as above), also because it means no additional tax/customs duty etc because I am selling out of Autria/EU. I will gladly discuss shipping outside the EU as well - it is your own responsibility to inform yourself about all possible additional costs (such as tax, duties etc) that may arrise when importing this knife to your country; also, the buyer alone is responsible for paying these additional costs - I am in no way responsible for any of these costs. From past experience I can say that there has never been tax/duties upon re-import to the US. I can not tell you if this is always the case though.
Also, I am released out of any obligation once the knife is handed over to the courrier - I will ship with tracking within the EU, if possible also outside the EU.
By buying this knife you state and declare that you have read and understood all terms and conditions above and agree to completely accept and fulfill them without exception and reservation. I will only sell this knife to you, if you guarantee that you meet all requirements stated above!
If you don't agree with all terms and conditions stated above, please don't even contact me about the knife - I can and will not sell to you.
Best,
Alex
Last edited:
