- Joined
- May 26, 2005
- Messages
- 2,515
First “I’ll take it” gets dibs. I’ll take Paypal (net to me) or Money Order. Shipping in the ConUS included in asking price. Outside the US shipping is additional depending on where it’s going.
(These are both custom/semi-custom. Not mass production versions)
This is a Darrel Ralph / DDR Trigger framelock with hand rubbed Radian Recurve Blade. This is not a production HTM, but a full-custom DDR.
It has Titanium scales with stainless "grille" inserts that actually act as a stop mechanism for the lock bar - cool feature.
It is 4.125" closed, 7.5" open, 3.5" blade, 3.25" edge. blade is 1/8" wide at the spine. Not sure which steel this one is.
This is an incredible knife and an incredible design. Please note that this one is NOT a collector piece. It has been carried plenty and used a bit but the blade and edge are in great shape! I believe the price reflects this, so be aware that this is a used piece.
The lockup is late, but it is extremely solid. It fires like a rocket, but I've tightened the pivot a bit after an accidental pocket fire.
A previous owner was a little aggressive with a torx driver, but none of the screws are stripped.
Asking: $325... $310... $300... $290... $285
Galyean Pro Junkyard Dawg (this one I’ll likely regret selling as they don’t come up often, but since it’s not getting used, I’ll let someone else play for a while)
Blade steel: CPM154CM (60-61 RC) 0.150” thick. Black DLK coated blade and Ti Handles. IKBS. 7” OAL, 4” Closed and 3” Blade.
Lockup is early and very positive. Has a nice ‘snap’ when opening.
This knife is in near-new condition. Never used to cut anything just flipped it a bit. It fires silky smooth and the edge is nice and sharp.
Asking: $450... SOLD
(These are both custom/semi-custom. Not mass production versions)
This is a Darrel Ralph / DDR Trigger framelock with hand rubbed Radian Recurve Blade. This is not a production HTM, but a full-custom DDR.
It has Titanium scales with stainless "grille" inserts that actually act as a stop mechanism for the lock bar - cool feature.
It is 4.125" closed, 7.5" open, 3.5" blade, 3.25" edge. blade is 1/8" wide at the spine. Not sure which steel this one is.
This is an incredible knife and an incredible design. Please note that this one is NOT a collector piece. It has been carried plenty and used a bit but the blade and edge are in great shape! I believe the price reflects this, so be aware that this is a used piece.
The lockup is late, but it is extremely solid. It fires like a rocket, but I've tightened the pivot a bit after an accidental pocket fire.
A previous owner was a little aggressive with a torx driver, but none of the screws are stripped.
Asking: $325... $310... $300... $290... $285
Galyean Pro Junkyard Dawg (this one I’ll likely regret selling as they don’t come up often, but since it’s not getting used, I’ll let someone else play for a while)
Blade steel: CPM154CM (60-61 RC) 0.150” thick. Black DLK coated blade and Ti Handles. IKBS. 7” OAL, 4” Closed and 3” Blade.
Lockup is early and very positive. Has a nice ‘snap’ when opening.
This knife is in near-new condition. Never used to cut anything just flipped it a bit. It fires silky smooth and the edge is nice and sharp.
Asking: $450... SOLD
Last edited:
