Have these four up for sale.
1. Fox Desert Fox Boris Manasherov design flipper. New model. 3.75" N690Co blade, 4.75" handle, 8.5" OAL. Milled black G-10 over stainless skeletonized liners. Caged bearing pivot, ceramic detent. Deep carry tip-up clip with swap-able glass breaker or smooth end tip. (Comes with tool to change out.) Incredibly ergonomic in hand and multiple grips. "Smooth" hardly describes the action on this thing, Fox killed it on this one inside and out. Very, very impressive. Flips with zero drag, and the blade can be "shaked" back into the handle with ease. Probably the smoothest action on a production flipper I've ever handled- no hype. Build screams quality. Locks up solid with zero play. Blade is wicked sharp from the factory and dead centered when closed. New in box with nice zipper pouch, tools and extra glass breaker tip. $200.00 shipped.
2. Viper Vox design Odino. Stonewashed 3" N690Co blade, black G-10 and stonewashed Ti frame lock. Blue anodized back spacer. Bearing pivot action is excellent. Locks up like a little tank, solid- no play. Reversible deep carry tip-up clip. Factory edge is very, very sharp. Blade is dead centered when closed. New in box with box. $150.00 shipped.
3. SOLD Spyderco Yojimbo 2. Not too much to say on this one, already well known and for good reason, it's pretty awesome. S30V blade, black G-10, compression lock, made in Golden. This one is NIB with box. Pivot bushing action on this particular one is exceptional. Super smooth opening, easily swings closed when the compression lock tab is released. Locks up tight, no play. Dead centered and the factory edge is sharp as heck. $100 shipped. SOLD
4. Lionsteel KUR. New model flipper, the bigger brother of sorts to the TRE model. 3.45" stonewash Sleipner blade, 3D milled and textured orange G-10 handles. Thick nested and skeletonized liners. Bearing pivot. If you know Lionsteel, you know they do fit and finish to the nines, and this is no exception. Deep carry wire pocket clip. Superior attention to detail everywhere. The finish of the G-10 with the micro ridge texture. The shape of the back spacer and flipper tab. The surface milling on the lock bar where your finger pushes to release. The design of the pivot and matching fasteners. The crowned spine of the blade...all just nicely done. Flips with authority, locks up with a solid thwack. Zero blade play, stout feel. Blade is dead centered. And as an extra bonus, Lionsteel has figured out how to properly sharpen Sleipner. (Some of the SR2A models with the same steel were pretty dull out of the box.) Factory edge is very nicely finished and properly sharp. Going to be one of the best "sleeper" models of the year, I have no doubt. New in box with box. $150.00
Pics below.
Prices include USPS Priority in the U.S. Willing to ship elsewhere at buyer's expense, but please note in the last few months USPS rates for international shipping have increased significantly.
PayPal preferred but absolutely no "eChecks". Low ball offers will be politely ignored. Not interested in trades at this time.
Drop me a note if you're interested, e-mail always works best/fastest. (I don't camp on my FS posts to track who posted what and when.)
Thanks!
Scott
1. Fox Desert Fox Boris Manasherov design flipper. New model. 3.75" N690Co blade, 4.75" handle, 8.5" OAL. Milled black G-10 over stainless skeletonized liners. Caged bearing pivot, ceramic detent. Deep carry tip-up clip with swap-able glass breaker or smooth end tip. (Comes with tool to change out.) Incredibly ergonomic in hand and multiple grips. "Smooth" hardly describes the action on this thing, Fox killed it on this one inside and out. Very, very impressive. Flips with zero drag, and the blade can be "shaked" back into the handle with ease. Probably the smoothest action on a production flipper I've ever handled- no hype. Build screams quality. Locks up solid with zero play. Blade is wicked sharp from the factory and dead centered when closed. New in box with nice zipper pouch, tools and extra glass breaker tip. $200.00 shipped.
2. Viper Vox design Odino. Stonewashed 3" N690Co blade, black G-10 and stonewashed Ti frame lock. Blue anodized back spacer. Bearing pivot action is excellent. Locks up like a little tank, solid- no play. Reversible deep carry tip-up clip. Factory edge is very, very sharp. Blade is dead centered when closed. New in box with box. $150.00 shipped.
3. SOLD Spyderco Yojimbo 2. Not too much to say on this one, already well known and for good reason, it's pretty awesome. S30V blade, black G-10, compression lock, made in Golden. This one is NIB with box. Pivot bushing action on this particular one is exceptional. Super smooth opening, easily swings closed when the compression lock tab is released. Locks up tight, no play. Dead centered and the factory edge is sharp as heck. $100 shipped. SOLD
4. Lionsteel KUR. New model flipper, the bigger brother of sorts to the TRE model. 3.45" stonewash Sleipner blade, 3D milled and textured orange G-10 handles. Thick nested and skeletonized liners. Bearing pivot. If you know Lionsteel, you know they do fit and finish to the nines, and this is no exception. Deep carry wire pocket clip. Superior attention to detail everywhere. The finish of the G-10 with the micro ridge texture. The shape of the back spacer and flipper tab. The surface milling on the lock bar where your finger pushes to release. The design of the pivot and matching fasteners. The crowned spine of the blade...all just nicely done. Flips with authority, locks up with a solid thwack. Zero blade play, stout feel. Blade is dead centered. And as an extra bonus, Lionsteel has figured out how to properly sharpen Sleipner. (Some of the SR2A models with the same steel were pretty dull out of the box.) Factory edge is very nicely finished and properly sharp. Going to be one of the best "sleeper" models of the year, I have no doubt. New in box with box. $150.00
Pics below.
Prices include USPS Priority in the U.S. Willing to ship elsewhere at buyer's expense, but please note in the last few months USPS rates for international shipping have increased significantly.
PayPal preferred but absolutely no "eChecks". Low ball offers will be politely ignored. Not interested in trades at this time.
Drop me a note if you're interested, e-mail always works best/fastest. (I don't camp on my FS posts to track who posted what and when.)
Thanks!
Scott
Last edited:
