Happy new year everyone!!
Chasing a grail and these are the last two that I'd even consider selling.
First up is a Lionsteel SR-1 with a Chad Nichols Starfire Damascus blade. I replaced the stock teflon washers with phosphor bronze ones and this piece is silky smooth and has tighter lockup than when I got it new. Bank vault with no play or flex in any direction. I carried this on and off but it didn't see much use. I found the stock convex grind to be a horrible cutter so I re-profiled it to 20 per side and its a great performer now. Blade is off center and has been since new but doesn't rub. I keep my non flipper pivots pretty tight so it may straighten out if you adjust it. Comes with all original packaging and knife art accessories.
$475 new, asking $425>> $400>>>NOW $375 TYD or best offer, need this gone!
Next is a Boker Plus GTC Federal that I modified myself. I hand sanded all of the frame edges from the stock media blasted finish to a nice satin 800 grit to pay homage to what Gus does on his custom federals.
I completely took apart the knife and sanded every millimeter of the edges the right way, even all the way around the hidden clip assembly. I didn't cut any corners and the whole process took about 10 hours. Lockup is about 25-30% and is as secure as the lionsteel, Boker really impressed me with this piece. Flipping action is very fast and the action is smooth running on GTC caged bearings. Blade sits ever so slightly to the left. This came as dull as a spoon when I bought it new so this was also reprofiled to 20 per side. Has been carried and used lightly but shows little to no signs of wear. Low serial number as part of the first run of these.
Asking $SOLD TYD for this one. I realize that's what a new one goes for but its in very good condition and there's a lot of work into this knife.
Payment is to be made via Paypal only. Prices are assuming gift, if not please add 3.5% to cover fees.
No trades please, will entertain reasonable cash offers and willing to deal a bit if you want both of them.
Yinz know the drill. First "I'll take it" gets it.
Thank you very much for looking. If you have any questions or need more pics just drop me a line.
Chasing a grail and these are the last two that I'd even consider selling.
First up is a Lionsteel SR-1 with a Chad Nichols Starfire Damascus blade. I replaced the stock teflon washers with phosphor bronze ones and this piece is silky smooth and has tighter lockup than when I got it new. Bank vault with no play or flex in any direction. I carried this on and off but it didn't see much use. I found the stock convex grind to be a horrible cutter so I re-profiled it to 20 per side and its a great performer now. Blade is off center and has been since new but doesn't rub. I keep my non flipper pivots pretty tight so it may straighten out if you adjust it. Comes with all original packaging and knife art accessories.
$475 new, asking $425>> $400>>>NOW $375 TYD or best offer, need this gone!
Next is a Boker Plus GTC Federal that I modified myself. I hand sanded all of the frame edges from the stock media blasted finish to a nice satin 800 grit to pay homage to what Gus does on his custom federals.
I completely took apart the knife and sanded every millimeter of the edges the right way, even all the way around the hidden clip assembly. I didn't cut any corners and the whole process took about 10 hours. Lockup is about 25-30% and is as secure as the lionsteel, Boker really impressed me with this piece. Flipping action is very fast and the action is smooth running on GTC caged bearings. Blade sits ever so slightly to the left. This came as dull as a spoon when I bought it new so this was also reprofiled to 20 per side. Has been carried and used lightly but shows little to no signs of wear. Low serial number as part of the first run of these.
Asking $SOLD TYD for this one. I realize that's what a new one goes for but its in very good condition and there's a lot of work into this knife.
Payment is to be made via Paypal only. Prices are assuming gift, if not please add 3.5% to cover fees.
No trades please, will entertain reasonable cash offers and willing to deal a bit if you want both of them.
Yinz know the drill. First "I'll take it" gets it.
Thank you very much for looking. If you have any questions or need more pics just drop me a line.
Last edited:
