Ok so went on a buying binge and now need to move some of the stuff I bought and can't keep. Found an antique Webley revolver so I need funds now for it.
A couple of the knives have been carried/gently used, and some are new.
First "I'll take it" gets it. PM is not preferred and email or a post in the thread followed by PM is it. If you PM without posting you may not end up with it as I don't check my PM's every day unless I'm in the middle of a transaction that is being done by PM.
I live in Calgary, priority will go to local sales. All prices are listed in US dollars to make my life easier as most of these were bought on us dollars. I will not be very interested in losing money on these unless o find out I grossly overpaid. Basically I don't want to MAKE money off these I just don't want to lose money.
On to the sale!
First up, one of my grail knives. Camillus CUDA MAXX 5.5" Stiletto D2 blade with titanium handles/frame lock! Sad to see it go as i have waited over ten years to find and procure this knife. It looks to have been used gently as there are some very light scratches near the tip, mostly on one side. They aren't horrible but I want to note that they are there. Hard to get a good picture of and I only have my cell phone to take pictures with.comes with the black zipper pouch. This is the 5.5" version but, considering it's size, carries incredibly well, as it is nice and thin. Beautiful knife, but I just can't keep all of my favorites
- now $300 Canadian if you are in Canada, plus shipping/insurance. price dropped again!
Next up is a TAC OPS "Blacjack" 4 with the radioactive green handle. 1095 high carbon steel blade. Comes with the factory sheath and belt loop, and thus one should come with the box (I knew I didn't throw it out so I'm sure is around here) - asking 130 $$$sold$$$
Next is a brand new Esee Izula II in OD green blade and the stock handles, with factory sheath. This one has cut a piece of paper or two, was carried in a bag by the PO but never actually used. It's been gently acid etched on the logos by me, but could be done deeper. Asking what I paid 60 price dropped bucks
Next is an Esee 3 with OD green blade and choice of dyed black standard handles or dyed black custom filed handles. The knife itself looks to be pretty much brand new. Comes with OD green factory sheath and molle clips. Asking 90 price drop handle choice added $$$SOLD$$$
Next is an Esee 4 in OD green with Orange handles. This one is like new as well, and instead of a factory sheath will come with a black leather custom made sheath. Has a awesome skull imprinted in the leather to go with the esee theme. Orange handles show some dirtiness but the knife itself is like new. Asking 100 price drop
Next is a pair of ZT0350. I'm only selling one but will give you the choice. One has been used some and shows very minor coating wear on the spine near the tip. Blade coating has some very minor wear, but I don’t recall any major scratches or anything other than right near the tip (spine and a little on the sides I think). Handle shows some carry marks/wear, but nothing horrible. A user, but a nice enough one. The other one is like new. I got it new, carried it a bit, sharpened it. from what I recall the only marks on the blade is near the edge where the coating was smoothed out by stropping. S30V blades on both. If you want the user I’ll do it for 80 price dropped if you want the nice one I’ll do it for 95 price dropped. Your choice. I can’t remember exactly what I paid for sure on these, but I seem to think that these were the prices.
$$SOLD PAYMENT RECEIVED$$ - To Leadchop54 - Next is a Strider PT. Got this one used and it shows some minor wear on the blade and the G10 side of the handle. The Ti side is flamed and does not look to show any real wear. It looks like at one point, the PO decided to try to take out the side to side play in the blade by tightening the pivot, but didn’t have the tool, so the pivot bolt/nut do have some slight marring. I used my tool to do it properly and there is no play in this one. Lock up on this one is pretty far – I’d say over 80% maybe 90 even, but it’s firm with zero play/rock at all, and no lock stick that I noticed either. Asking 225 on this one (what I paid, again). $$SOLD PAYMENT RECEIVED$$
$sold$ Next is a Hogue EX01 black handles. This one was carried and gently used. Minor marks in a couple places on the black aluminum handles, but nothing crazy or horrible. Blade is in great shape and looks barely used at all. I cleaned it up, oiled the pivot, touched up the edge a hair, and put it in the safe. Asking 85 for this (again, what I paid). $sold$
Next up is a Benchmade Bedlam with serrated satin blade in 154CM. Beautiful knife, carried it a couple of times, cut some paper with it and that’s it. I bought this one brand new and, from the factory, there were two very small marks on the spine of the knife across from the apex of the belly. Nothing big. I *think* this one comes with the box, I’d have to double check to verify. comes with the Benchmade microfiber bag. I did sharpen it. Asking 115 (price dropped) for this one.price dropped again!
Next we have a ZT0200 that is brand new. I think I sharpened it to a 25 degree angle and brought to a razor edge but not mirror polished as it was intended to be a user. From ZT, one of the clip screws was mis-formed from the factory, so I got a new clip screw from them and have replaced it (full disclosure – it’s perfect though). Asking what I paid for this one – 122 dollars.
Next up is a Lionsteel SR-2 with Schleipner (spelling?) steel blade and a green machined aluminum handle. This is a gorgeous knife, I’m sure I touched up the edge on it. 160 canadian for this one (price dropped todaybelow what I paid) $$$SOLD$$$
Finally, I have a couple of used/well used knives I’m willing to sell. I’m not sure at all what they’re worth but if you’re interested in knowing what exactly there is, ask me and I’ll let you know. I’m not at home so I don’t remember the exact names of all of them, but as an example I have a pair of CRKT My Tighe/Mini My Tighe knives, both users, would prefer to sell as a set. Both show signs of carry and use, but both have sharp edges and the VEFF serrations are in great shape. I’d say I’d want 60 price dropped for the pair of them.
Also have a Kershaw, g g hawk I think it is. It’s a flipper with the slide lock on the handle. This one’s been well used/carried, but in decent shape. Would probably be asking 75 for it. Functions great and smooth, but shows some wear on the handle and on the coating of the blade.
Have a CRKT M-21 (I think that’s it anyways) with the AUS8 drop point blade, serrated. Blade was coated but I did an acid etch on it and it looks really cool I think. This is the one with the dual flippers on it, so when you pull it from your pocket it whips open immediately. Has the Auto-LAWKS system still on it and not modified (leave that up to you if you want to). I’d want 65 for this I’d say – handle on this shows some wear/marks. price dropped [COLOR]
Have a Benchmade 530 with the spear point blade in 154CM and with the AXIS lock. This was carried/used, satin finish blade shows some very minor scratches, handle shows very minor carry wear but nothing major, clip has paint worn off on the edges which you can get new for free Asking 75 price drop for that one.
Have a Benchmade 525 Mini Presidio for sale this one has a black coated serrated blade. Aluminum handles on this one. Handles have a few minor marks/dings from carry, blade has some minor scratches on the coating but nothing horrible. Asking 105 price drop for this one.price dropped again!
Sog Vulcan (I think it is the mini Vulcan, it is similar sized to a small Sebenza or so) VG-10 in nice condition. This was carried rarely and never used hard. Blade might show very minor wear but nothing serious at all. Asking 70 for this one!. price dropped again!
Please if the prices on those are too high, just make an offer. The worst I can say is no, I may counter offer, or I may just accept the offer. I think that the prices are pretty fair though, from the research I’ve done on the forums.
The prices are all listed as plus shipping, but I may negociate a little on that or on the prices, but probably not by much as those prices are simply what I paid for the knives myself. Most have been purchased by me in the last few months, off the forums. Most have at least been carried or used, unless otherwise noted, but the condition is as noted.
EMT is absolutely preferred in Canada. If you are paying in Canadian funds, will figure that out by pm or email. Paypal will also work. Not looking for any trades except for an Edge Pro system of similar value. If you are from the states, I’ll ship to you but shipping is most definitely on you and risk falls on you for the border crossing – Paypal gift will will be accepted or regular paypal if you pay the fees.
Email me at kprice at Tridyne dot ca for info or to buy.
Thanks BF!
EDIT - MORE PICS:
P.S. Photos will follow of more of the knives - I can't seem to get them all to work right now. Might be just a problem with the WIFI here but i'll get er done asap. Thanks again BF
Edit: I now have photos of all knives just ask if they aren't up there.
Also have a sog Vulcan vg-10 for sale not sure what they are worth PM if interested
A couple of the knives have been carried/gently used, and some are new.
First "I'll take it" gets it. PM is not preferred and email or a post in the thread followed by PM is it. If you PM without posting you may not end up with it as I don't check my PM's every day unless I'm in the middle of a transaction that is being done by PM.
I live in Calgary, priority will go to local sales. All prices are listed in US dollars to make my life easier as most of these were bought on us dollars. I will not be very interested in losing money on these unless o find out I grossly overpaid. Basically I don't want to MAKE money off these I just don't want to lose money.
On to the sale!
First up, one of my grail knives. Camillus CUDA MAXX 5.5" Stiletto D2 blade with titanium handles/frame lock! Sad to see it go as i have waited over ten years to find and procure this knife. It looks to have been used gently as there are some very light scratches near the tip, mostly on one side. They aren't horrible but I want to note that they are there. Hard to get a good picture of and I only have my cell phone to take pictures with.comes with the black zipper pouch. This is the 5.5" version but, considering it's size, carries incredibly well, as it is nice and thin. Beautiful knife, but I just can't keep all of my favorites
- now $300 Canadian if you are in Canada, plus shipping/insurance. price dropped again!Next up is a TAC OPS "Blacjack" 4 with the radioactive green handle. 1095 high carbon steel blade. Comes with the factory sheath and belt loop, and thus one should come with the box (I knew I didn't throw it out so I'm sure is around here) - asking 130 $$$sold$$$
Next is a brand new Esee Izula II in OD green blade and the stock handles, with factory sheath. This one has cut a piece of paper or two, was carried in a bag by the PO but never actually used. It's been gently acid etched on the logos by me, but could be done deeper. Asking what I paid 60 price dropped bucks
Next is an Esee 3 with OD green blade and choice of dyed black standard handles or dyed black custom filed handles. The knife itself looks to be pretty much brand new. Comes with OD green factory sheath and molle clips. Asking 90 price drop handle choice added $$$SOLD$$$
Next is an Esee 4 in OD green with Orange handles. This one is like new as well, and instead of a factory sheath will come with a black leather custom made sheath. Has a awesome skull imprinted in the leather to go with the esee theme. Orange handles show some dirtiness but the knife itself is like new. Asking 100 price drop
Next is a pair of ZT0350. I'm only selling one but will give you the choice. One has been used some and shows very minor coating wear on the spine near the tip. Blade coating has some very minor wear, but I don’t recall any major scratches or anything other than right near the tip (spine and a little on the sides I think). Handle shows some carry marks/wear, but nothing horrible. A user, but a nice enough one. The other one is like new. I got it new, carried it a bit, sharpened it. from what I recall the only marks on the blade is near the edge where the coating was smoothed out by stropping. S30V blades on both. If you want the user I’ll do it for 80 price dropped if you want the nice one I’ll do it for 95 price dropped. Your choice. I can’t remember exactly what I paid for sure on these, but I seem to think that these were the prices.
$$SOLD PAYMENT RECEIVED$$ - To Leadchop54 - Next is a Strider PT. Got this one used and it shows some minor wear on the blade and the G10 side of the handle. The Ti side is flamed and does not look to show any real wear. It looks like at one point, the PO decided to try to take out the side to side play in the blade by tightening the pivot, but didn’t have the tool, so the pivot bolt/nut do have some slight marring. I used my tool to do it properly and there is no play in this one. Lock up on this one is pretty far – I’d say over 80% maybe 90 even, but it’s firm with zero play/rock at all, and no lock stick that I noticed either. Asking 225 on this one (what I paid, again). $$SOLD PAYMENT RECEIVED$$
$sold$ Next is a Hogue EX01 black handles. This one was carried and gently used. Minor marks in a couple places on the black aluminum handles, but nothing crazy or horrible. Blade is in great shape and looks barely used at all. I cleaned it up, oiled the pivot, touched up the edge a hair, and put it in the safe. Asking 85 for this (again, what I paid). $sold$
Next up is a Benchmade Bedlam with serrated satin blade in 154CM. Beautiful knife, carried it a couple of times, cut some paper with it and that’s it. I bought this one brand new and, from the factory, there were two very small marks on the spine of the knife across from the apex of the belly. Nothing big. I *think* this one comes with the box, I’d have to double check to verify. comes with the Benchmade microfiber bag. I did sharpen it. Asking 115 (price dropped) for this one.price dropped again!
Next we have a ZT0200 that is brand new. I think I sharpened it to a 25 degree angle and brought to a razor edge but not mirror polished as it was intended to be a user. From ZT, one of the clip screws was mis-formed from the factory, so I got a new clip screw from them and have replaced it (full disclosure – it’s perfect though). Asking what I paid for this one – 122 dollars.
Next up is a Lionsteel SR-2 with Schleipner (spelling?) steel blade and a green machined aluminum handle. This is a gorgeous knife, I’m sure I touched up the edge on it. 160 canadian for this one (price dropped todaybelow what I paid) $$$SOLD$$$
Finally, I have a couple of used/well used knives I’m willing to sell. I’m not sure at all what they’re worth but if you’re interested in knowing what exactly there is, ask me and I’ll let you know. I’m not at home so I don’t remember the exact names of all of them, but as an example I have a pair of CRKT My Tighe/Mini My Tighe knives, both users, would prefer to sell as a set. Both show signs of carry and use, but both have sharp edges and the VEFF serrations are in great shape. I’d say I’d want 60 price dropped for the pair of them.
Also have a Kershaw, g g hawk I think it is. It’s a flipper with the slide lock on the handle. This one’s been well used/carried, but in decent shape. Would probably be asking 75 for it. Functions great and smooth, but shows some wear on the handle and on the coating of the blade.
Have a CRKT M-21 (I think that’s it anyways) with the AUS8 drop point blade, serrated. Blade was coated but I did an acid etch on it and it looks really cool I think. This is the one with the dual flippers on it, so when you pull it from your pocket it whips open immediately. Has the Auto-LAWKS system still on it and not modified (leave that up to you if you want to). I’d want 65 for this I’d say – handle on this shows some wear/marks. price dropped [COLOR]
Have a Benchmade 530 with the spear point blade in 154CM and with the AXIS lock. This was carried/used, satin finish blade shows some very minor scratches, handle shows very minor carry wear but nothing major, clip has paint worn off on the edges which you can get new for free Asking 75 price drop for that one.
Have a Benchmade 525 Mini Presidio for sale this one has a black coated serrated blade. Aluminum handles on this one. Handles have a few minor marks/dings from carry, blade has some minor scratches on the coating but nothing horrible. Asking 105 price drop for this one.price dropped again!
Sog Vulcan (I think it is the mini Vulcan, it is similar sized to a small Sebenza or so) VG-10 in nice condition. This was carried rarely and never used hard. Blade might show very minor wear but nothing serious at all. Asking 70 for this one!. price dropped again!
Please if the prices on those are too high, just make an offer. The worst I can say is no, I may counter offer, or I may just accept the offer. I think that the prices are pretty fair though, from the research I’ve done on the forums.
The prices are all listed as plus shipping, but I may negociate a little on that or on the prices, but probably not by much as those prices are simply what I paid for the knives myself. Most have been purchased by me in the last few months, off the forums. Most have at least been carried or used, unless otherwise noted, but the condition is as noted.
EMT is absolutely preferred in Canada. If you are paying in Canadian funds, will figure that out by pm or email. Paypal will also work. Not looking for any trades except for an Edge Pro system of similar value. If you are from the states, I’ll ship to you but shipping is most definitely on you and risk falls on you for the border crossing – Paypal gift will will be accepted or regular paypal if you pay the fees.
Email me at kprice at Tridyne dot ca for info or to buy.
Thanks BF!
EDIT - MORE PICS:
P.S. Photos will follow of more of the knives - I can't seem to get them all to work right now. Might be just a problem with the WIFI here but i'll get er done asap. Thanks again BF
Edit: I now have photos of all knives just ask if they aren't up there.
Also have a sog Vulcan vg-10 for sale not sure what they are worth PM if interested
Last edited:
