FS: Luckett, Peterson, Huey, Davidson, Bloomer, Shirey, Carter, Crawford, Pease, etc.

J

Jimdo

Feedback: +39 / =0 / -0
Joined
May 26, 2005
Messages
915
Unless otherwise noted; all knives are in 100% condition, as received from the maker.

Daniel Ehrenberger Bowie

Specifications
Blade Steel : Forged 1095
Blade Length : 10 5/8 in.
OAL Length : 16 1/4 in.
Octagonal Hardwood Handle
Leather Sheath
Condition Note : This knife has a few marks (discolorations) on the blade…. you are able to see these discolorations in the pics, I would rate the knife at 90%.
Price : $225.00










Brandon Shirey (Apprentice of Jason Knight) Fighter

Specifications
Blade Steel : Forged L6 , Differentially Heat Treated with visible hamon
Blade Length : 5 1/4 in.
OAL Length : 10 in.
Cord Wrapped Ray Skin Handle
Molded Kydex Sheath with Built in Oiler
Price : $350.00






Bill Luckett Fighter

Specifications
Blade Steel : ATS-34
Blade Length : 5 1/2 in.
OAL Length : 11 1/4 in.
Micarta and Hardwood Handle
No Sheath
Price : $ TRADED





Dr. Dan Peterson M.S. Integral

Specifications
Blade Steel : Forged 1095, Differentially Heat Treated with visible hamon
Blade Length : 9 in.
OAL Length : 14 1/2 in.
Sambar Stag Handle
Leather Sheath built around a Wooden Frame
Condition Note : There are a few blemishes (discolorations) on this piece, I attempted to capture them in the images…. Some are hard to see, the most are on the pommel of the knife but was unable to capture them in an image. I would rate the knife at 90 %.
Price : $750.00






Steve Huey Fighter

Specifications
Blade Steel : CPM-154
Blade Length : 7 in.
OAL Length : 12 1/2 in.
Micarta Handle
Bladetech Kydex Sheath
Tapered Tang , On bottom of Tang is inscribed : “N.W. Safari 92”
Condition Note : A few small blemishes on the finish of the blade, I would rate this knife at 98%.
Price : $300.00







Edmund Davidson Skinner

Specifications
Blade Steel : 440C
Blade Length : 3 in.
OAL Length : 6 3/4 in.
Hardwood Handle
Leather Sheath (the blade has stuck through this sheath on both sides)
Lightly Tapered Tang, knife dated : 10/19/2002
Condition Note : Knife is 100% but the sheath has been “stabbed” (for lack of a better term) by inserting the knife in to it on both sides. You are able to see the stab marks in the pics.
Price : $300.00






Dr. Fred Carter 440C Cast Dendritic Integral Hunter

Specifications
Blade Steel : 440C Cast Dendritic
Blade Length : 3 in.
OAL Length : 7 in.
Rosewood Inlays
Signed Leather Sheath
This steel provides a superior cutting edge. At it’s thickest; the Blade Spine is 3/16 inch with a depth of 7/8 inch. The handle swells at the center are a thickness of 1/2 inch.
Price : $550.00







Pat and Wes Crawford Damascus & MOP Neck Knife

Specifications
Blade Steel : Rob Thomas Damascus
Blade Length : 3 in.
OAL Length : 6 1/2 in.
Presentation Grade MOP Handle
Molded Kydex Sheath with integrated Turquoise and Wolf Head by 'Semich'
Each MOP Scale is 1/8 in. thick
Price : $425.00






Joe Watson Hybrid Tanto Neck Knife

Specifications
Blade Steel : CPM 154, Acid Etched
Blade Length : 4 in.
OAL Length : 7 1/8 in.
Cord Wrapped Handle
Molded Kydex Sheath
This knife is Double Heat Treated and then Cryogenically Frozen, it’s a thick knife made from 1/8 stock.
Price : $200.00



 
Last edited:
Alan Bloomer Neck Knife

Specifications

Blade Steel : ATS-34
Blade Length : 3 in.
OAL Length : 6 1/4 in.
Armadillo Hide Handle
Leather Sheath
Mokume Bolsters
Price : $160.00




Jeff Cover Neck Knife

Specifications
Blade Steel : ATS-34
Blade Length : 3 in.
OAL Length : 6 1/2 in.
Stabilized Burl Wood Handle
Molded Kydex Sheath
Price : $115.00





Alan Bloomer Damascus & Gold Lip MOP Liner Lock

Specifications
Blade Steel : Damascus
Blade Length : 3 1/4 in.
OAL Length Opened : 7 3/8 in.
OAL Closed : 4 1/8 in.
Presentation Grade Gold Lip MOP Handle
Diamond inlayed into thumb stud, file worked anodized titanium liners, file worked blade spine, each scale is 1/8 in. thick MOP, Bolster is Damascus.
Condition Note : There appears to be a small amount of pitting on the bolsters and the blade, more so on the bolsters (only noticeable under the right lighting conditions), I would rate the knife at 90%.
Price : $700.00










Mark Nevling / Burr Oak Damascus Liner Lock

Specifications
Blade Steel : Damascus
Blade Length : 3 1/4 in.
OAL Length Opened : 7 1/8 in.
OAL Closed : 4 1/4 in.
Oosik Handle
Diamond inlayed into thumb stud, anodized titanium liners, Damascus back spacer
Very elaborate leather and snake skin sheath
Condition Note : Everything is 100% as received from the maker, though there is a small crack on the back Oosik scale as seen in the pics.
Price : $650.00






W.D. Pease Carbon Fiber & MOP Lockback

Specifications
Blade Steel : ATS-34
Blade Length : 3 in.
OAL Length Opened : 7 3/8 in.
OAL Closed : 4 3/8 in.
Presentation Grade MOP inlayed into Carbon Fiber Frame
Price : $600.00






Frank Niro Eggerling Damascus and Mammoth Ivory Liner Lock

Specifications
Blade Steel : Eggerling Flag Pattern Damascus
Blade Length : 5 in.
OAL Length Opened : 9 in.
OAL Closed : 5 1/4 in.
Fossilized Mammoth Ivory Handle
Ruby inlayed into thumb stud, anodized and file worked titanium liners, File worked Damascus back spacer
Price : $1100.00








Les Adams Blue G-10 & Raindrop Damascus Liner Lock

Specifications
Blade Steel : Damascus
Blade Length : 2 1/4 in.
OAL Length Opened : 5 1/2 in.
OAL Closed : 3 1/4 in.
Blue G-10 Frame with Titanium Liner Lock
Les uses his own Damascus for these little knives and they have a unique opening system that is very fast. There is a slight learning curve but once you get it down, there’s nothing to it. Just place your thumb on the back of the knife and with your other hand, use your index finger to pop the knife open via the only part of the steel accessible.
Price : $140.00







As with everything that I sell, if your not 100% satisfied with the purchase you may certainly return the item for a complete refund of the purchase price.

All prices are inclusive of S&H , there will be a 4% charge on PP, no charge for personal, I prefer USPS Money Orders for payment, however. Insurance is up to the buyer.

My paypal address is : jj-guns (at) hot mail (dot) com

The only trades I would consider at this time would involve Balisongs.

Thanks for Looking. Feel free to PM me or email me with any questions that you might have.
 
Benchmade Model 760 Bk LFTi

Specifications
Blade Steel : CPM - M4 Tool Steel
Blade Length : 4 in.
OAL Length Opened : 9 in.
OAL Closed : 5 in.
Titanium Frame Lock
This knife has been discontinued for quite a while now. It's 100% as received from Benchmade. Includes box and papers. This is an absolute tank of a knife.
Price : $260.00






Lights for sale

All lights are 100% as received from manufacturer.

Jetbeam RRT-3 , 1950 Lumen Monstrosity
3 x Cree XML LEDs, Multiple Levels of Brightness and a tactical strobe, One bad motor scooter. This light ONLY operates off of 18650 batteries (it requires three).
This light comes with the carry handle and the weapons mount as well as the Pressure Switch for weapons mounting. All 100% NIB.
Price : $250.00




Niteye Zip 20
1 x Cree XML LED, 300 Lumens, 2 x CR123A batteries. Also features a hidden strobe mode and hidden SOS mode.
Variable rheostat control, there is no button on this light, it turns on and off with the knurled "wheel" next to the head of the light.
What sets this light off is that it milled out of a solid billet of 6al4v titanium. A truly exceptional piece of functional art.
Price : $350.00


 
Last edited:
Jimdo said:
Benchmade Model 760 Bk LFTi

Specifications
Blade Steel : CPM - M4 Tool Steel
Blade Length : 4 in.
OAL Length Opened : 9 in.
OAL Closed : 5 in.
Titanium Frame Lock
This knife has been discontinued for quite a while now. It's 100% as received from Benchmade. Includes box and papers. This is an absolute tank of a knife.
Price : $260.00






Lights for sale

All lights are 100% as received from manufacturer.

Jetbeam RRT-3 , 1950 Lumen Monstrosity
3 x Cree XML LEDs, Multiple Levels of Brightness and a tactical strobe, One bad motor scooter. This light ONLY operates off of 18650 batteries (it requires three).
This light comes with the carry handle and the weapons mount as well as the Pressure Switch for weapons mounting. All 100% NIB.
Price : $250.00




Niteye Zip 20
1 x Cree XML LED, 300 Lumens, 2 x CR123A batteries. Also features a hidden strobe mode and hidden SOS mode.
Variable rheostat control, there is no button on this light, it turns on and off with the knurled "wheel" next to the head of the light.
What sets this light off is that it milled out of a solid billet of 6al4v titanium. A truly exceptional piece of functional art.
Price : $350.00


Click to expand...

Please tell me you have the 760 lfti still in Stock
 
You must log in or register to reply here.
Back
Top