Thread Closed
Hello everyone,
I'm here selling my collection of knives, I'm just downsizing my collection. I have several makers of knives, all knives except for 2 knives (which are the Zt0566's) have all their paper work and original boxes.I think my prices are fair for each knife, I will still take offers on some knives though. I will ship CONUS Only, the prices will include shipping and insurance, if you want to send the money as Paypal Goods add 3%.
All the links I have set up, are from my Google Drive links, you can contact me at my email which is xsadpandaz@gmail.com
I will be going by the "I'll Take It" rules, followed up by an email gets the knife.
First up I have a CRK Umnumzaan (Old Pivot) with tool for another post
LNIB. I was not the original owner of the knife, when I got the knife it looked new, even though they told me it was used. The only mark it has is at the lock bar when I put it into my pocket, I did take the knife apart to just take off the lanyard. I'm selling this knife just because I'm not to fond of the ergonomics of the knife, the only thing I cut w/ the knife was my thumb. The centering is perfect, extremely sharp, I'm more of a flipper guy, but it's action is nice.
Here are the pics for the Umnumzaan
Next up a Hinderer XM-18 3.5 Slicer with Orange scales (User) for another post
Used. I like this knife a lot, and it's used, so used that it might need a sharpening. I don't really want to sell the knife but if I sell the knife for what I'm asking for then it will go. It has, what I think, a weak detent and also has a smooth action and it's centered.
Here are the pics for the XM-18
Next up a ZT0392 for another post
Used. Comes with everything, which is Collector Box, Outer box that holds the Collector Box, Certificate. I got this knife on the secondary market, so I'm selling it to get some of the money back. It has been carried for about two weeks, I have cut a bit of plastic straps, cardboard, and paper. The edge is still sharp, it has a really crisp detent and makes the blade fly out when you flip it open. I have pulled the knife apart 2 times to change out the barrings of them, they originally have caged Steel Ball bearings, I changed them for Ceramic Ball bearings. The ceramic ball bearing are already installed into the knife and you will get the steel ball bearing on the side if you so wish to put them back in. With the Ceramic balls it makes the action smoother than the Steel bearing ever where. I even took a short video on the smoothness of the knife on ceramic bearings.
Here are the pics of the ZT0392
Next is a ZT0562CF for $old with Extra hardware
Used. Was carried about a week, it had to cut a bit of plastic straps, cardboard and paper. This knife is wonderful, it was my best flipper I've ever had until I got the ZT0392 with ceramic bearings. The carbon fiver used on this knife is really nice, the lockup is solid, centered perfectly. I got some extra hardware for the knife, I got some blue anodized hardware that costed me $110, everything but the pivot is installed on it. I am not using the pivot because I think it was not made correctly, with the factory pivot I get 45% lock up, but with the Blue pivot it was giving me more like 65% lockup.
Next are the Mcusta Knives.
Mcusta Katana Blue/Orange for $old
Used. This one is basically new, only slipped into pocket once and cut some paper with it. The only problem with the knife is that it's not centered, I got the knife like this, I have tried to adjust the pivot but it just rotates in place. I can't seem to figure out a way to adjust the pivot, all I have done is just scratch the pivot with the screw driver I used.
Mcusta Tsuchi Bushi Black $old
LNIB. I have two of these, one has not been opened, the other have just been flipped and fondled. The centering are great on these, they are sharp and action is great.
Next up are the Spiderco Knives.
ParaMilitary 2 G10 in CPM S30V for $old
LNIB. This is an awesome knife, I only got it because of the compression lock. I was into the Axis Lock type knifes when I got this knife. I have never used it, but I have flipped it open a lot and slipped into the pocket once. It has good centering, it's sharp and has great action. I enjoyed fondling this knife.
Manix 2 FFG Black G10 with Black Blade for another post
LNIB. This is a great blade, I enjoy Axis lock type knives, but my taste are in flippers now. Centering is great, slipped into pocket once, cut a sheet of paper, and have fondled the knife.
Here are the pics on Manix 2
Next up are my Benchmades.
Benchmade 940-1 for $old with extra Blue/Carbon Fiber Clip.
LNIB. This is a beautiful knife, I love the look of carbon fiber, when this was first up for sale on Benchmade site I bought myself one. This knife has just been fondled and flipped, centering is great and is sharp. This will also have an extra of a Blue/Carbon Fiber clip, I never had the guts to carry the knife, so I never used the clip.
Benchmade 940-801 is $old
LNIB. This knife has never been carried or cut with anything, just fondled and flipped. The blue on this knife is amazing, I was blown away by the color, since blue is my favorite color. This doesn't come with the pen it originally cam with, it does come with the box and paperwork.
Benchmade 943 for another post
Used. This was one of my carry knives for a while, I liked the clip point version of the original sheepsfoot blade. The knife is still sharp, and the finish on the handle is wearing off a bit, you can see that in the pics. Other than that, this is a fantastic knife. This knife has an extra clip installed, its a deep carry titanium clip anodized blue, the original clip will come with the knife.
Here are the pics for the BM 943
Benchmade 943BK for $old
LNIB. This knife has just been flipped a few times, that's pretty much it.
Benchmade Custom Griptilian 551 in S30V White Scales/Black Blade $old
LNIB. Full sized Griptilian. I got this to have a Custom Griptilian that had a Strom Trooper look to it. There is one problem with the knife, the scale seems to be scratched up. (You will see in the pictures) I got the knife like this from Benchmade, I contacted them about this and they just told me to clean it off with some Goof off. I went and bought some, cleaned it and still looks the same, I contacted them back, but I never got a response. Not sure if contacted them back incorrectly or something but they messaged me back.
Benchmade Doug Ritter S30V for $old
Used. Full sized Griptilian. This was one of my other users, I was not the original owner of the blade. The original knife was in terrible shape, it was dirty and some of the screws where stripped. I bought myself this Custom G10 Scales, this made the knife feel so much better than the original handle. The blade is off centered without rubbing any side, if you want a good action out of the knife. It still has its original edge, and some of the screws are stripped, the screws the person provided with his scales where not that great or just put too much force. The scale costed me $85 Plus international shipping, because it was shipped from Russia. So you are getting a great deal out of this knife.
Benchmade Griptilian Custom Scale for another post
Unused. This is for a full sized Griprilian. I got a 2nd scale for the Griptilian because I was planning to get another Doug Ritter, I paid $85 plus shipping for this. This is really nice looking, and it will make your Griptilian feel better in hand with this scale. I bought them from an Ebayer Called Igorded57, you can see the rest of his offering. He is great person to work with, but that is pretty much it for this scale.
Here are the pictures of the Griptilian Scales
Now for the Zero Tolerance.
ZT0566 for $old
Used, De-assisted, no box, no tension bar. This is one of my user knives, it has the original edge, scales and pocket clip are a bit worn out. The knife is centered and flips great, well if you are used to the Hinderer style of flipping.
Here are the pics for the ZT0566
ZT0566BW for another post
Like New, no box, de-assisted, no torsion bar. I just de-assisted the knife and slipped into my pocket once. There is no much to say much about the knife.
Here are the pics for ZT0566BW
Hello everyone,
I'm here selling my collection of knives, I'm just downsizing my collection. I have several makers of knives, all knives except for 2 knives (which are the Zt0566's) have all their paper work and original boxes.I think my prices are fair for each knife, I will still take offers on some knives though. I will ship CONUS Only, the prices will include shipping and insurance, if you want to send the money as Paypal Goods add 3%.
All the links I have set up, are from my Google Drive links, you can contact me at my email which is xsadpandaz@gmail.com
I will be going by the "I'll Take It" rules, followed up by an email gets the knife.
First up I have a CRK Umnumzaan (Old Pivot) with tool for another post
LNIB. I was not the original owner of the knife, when I got the knife it looked new, even though they told me it was used. The only mark it has is at the lock bar when I put it into my pocket, I did take the knife apart to just take off the lanyard. I'm selling this knife just because I'm not to fond of the ergonomics of the knife, the only thing I cut w/ the knife was my thumb. The centering is perfect, extremely sharp, I'm more of a flipper guy, but it's action is nice.
Here are the pics for the Umnumzaan
Next up a Hinderer XM-18 3.5 Slicer with Orange scales (User) for another post
Used. I like this knife a lot, and it's used, so used that it might need a sharpening. I don't really want to sell the knife but if I sell the knife for what I'm asking for then it will go. It has, what I think, a weak detent and also has a smooth action and it's centered.
Here are the pics for the XM-18
Next up a ZT0392 for another post
Used. Comes with everything, which is Collector Box, Outer box that holds the Collector Box, Certificate. I got this knife on the secondary market, so I'm selling it to get some of the money back. It has been carried for about two weeks, I have cut a bit of plastic straps, cardboard, and paper. The edge is still sharp, it has a really crisp detent and makes the blade fly out when you flip it open. I have pulled the knife apart 2 times to change out the barrings of them, they originally have caged Steel Ball bearings, I changed them for Ceramic Ball bearings. The ceramic ball bearing are already installed into the knife and you will get the steel ball bearing on the side if you so wish to put them back in. With the Ceramic balls it makes the action smoother than the Steel bearing ever where. I even took a short video on the smoothness of the knife on ceramic bearings.
Here are the pics of the ZT0392
Next is a ZT0562CF for $old with Extra hardware
Used. Was carried about a week, it had to cut a bit of plastic straps, cardboard and paper. This knife is wonderful, it was my best flipper I've ever had until I got the ZT0392 with ceramic bearings. The carbon fiver used on this knife is really nice, the lockup is solid, centered perfectly. I got some extra hardware for the knife, I got some blue anodized hardware that costed me $110, everything but the pivot is installed on it. I am not using the pivot because I think it was not made correctly, with the factory pivot I get 45% lock up, but with the Blue pivot it was giving me more like 65% lockup.
Next are the Mcusta Knives.
Mcusta Katana Blue/Orange for $old
Used. This one is basically new, only slipped into pocket once and cut some paper with it. The only problem with the knife is that it's not centered, I got the knife like this, I have tried to adjust the pivot but it just rotates in place. I can't seem to figure out a way to adjust the pivot, all I have done is just scratch the pivot with the screw driver I used.
Mcusta Tsuchi Bushi Black $old
LNIB. I have two of these, one has not been opened, the other have just been flipped and fondled. The centering are great on these, they are sharp and action is great.
Next up are the Spiderco Knives.
ParaMilitary 2 G10 in CPM S30V for $old
LNIB. This is an awesome knife, I only got it because of the compression lock. I was into the Axis Lock type knifes when I got this knife. I have never used it, but I have flipped it open a lot and slipped into the pocket once. It has good centering, it's sharp and has great action. I enjoyed fondling this knife.
Manix 2 FFG Black G10 with Black Blade for another post
LNIB. This is a great blade, I enjoy Axis lock type knives, but my taste are in flippers now. Centering is great, slipped into pocket once, cut a sheet of paper, and have fondled the knife.
Here are the pics on Manix 2
Next up are my Benchmades.
Benchmade 940-1 for $old with extra Blue/Carbon Fiber Clip.
LNIB. This is a beautiful knife, I love the look of carbon fiber, when this was first up for sale on Benchmade site I bought myself one. This knife has just been fondled and flipped, centering is great and is sharp. This will also have an extra of a Blue/Carbon Fiber clip, I never had the guts to carry the knife, so I never used the clip.
Benchmade 940-801 is $old
LNIB. This knife has never been carried or cut with anything, just fondled and flipped. The blue on this knife is amazing, I was blown away by the color, since blue is my favorite color. This doesn't come with the pen it originally cam with, it does come with the box and paperwork.
Benchmade 943 for another post
Used. This was one of my carry knives for a while, I liked the clip point version of the original sheepsfoot blade. The knife is still sharp, and the finish on the handle is wearing off a bit, you can see that in the pics. Other than that, this is a fantastic knife. This knife has an extra clip installed, its a deep carry titanium clip anodized blue, the original clip will come with the knife.
Here are the pics for the BM 943
Benchmade 943BK for $old
LNIB. This knife has just been flipped a few times, that's pretty much it.
Benchmade Custom Griptilian 551 in S30V White Scales/Black Blade $old
LNIB. Full sized Griptilian. I got this to have a Custom Griptilian that had a Strom Trooper look to it. There is one problem with the knife, the scale seems to be scratched up. (You will see in the pictures) I got the knife like this from Benchmade, I contacted them about this and they just told me to clean it off with some Goof off. I went and bought some, cleaned it and still looks the same, I contacted them back, but I never got a response. Not sure if contacted them back incorrectly or something but they messaged me back.
Benchmade Doug Ritter S30V for $old
Used. Full sized Griptilian. This was one of my other users, I was not the original owner of the blade. The original knife was in terrible shape, it was dirty and some of the screws where stripped. I bought myself this Custom G10 Scales, this made the knife feel so much better than the original handle. The blade is off centered without rubbing any side, if you want a good action out of the knife. It still has its original edge, and some of the screws are stripped, the screws the person provided with his scales where not that great or just put too much force. The scale costed me $85 Plus international shipping, because it was shipped from Russia. So you are getting a great deal out of this knife.
Benchmade Griptilian Custom Scale for another post
Unused. This is for a full sized Griprilian. I got a 2nd scale for the Griptilian because I was planning to get another Doug Ritter, I paid $85 plus shipping for this. This is really nice looking, and it will make your Griptilian feel better in hand with this scale. I bought them from an Ebayer Called Igorded57, you can see the rest of his offering. He is great person to work with, but that is pretty much it for this scale.
Here are the pictures of the Griptilian Scales
Now for the Zero Tolerance.
ZT0566 for $old
Used, De-assisted, no box, no tension bar. This is one of my user knives, it has the original edge, scales and pocket clip are a bit worn out. The knife is centered and flips great, well if you are used to the Hinderer style of flipping.
Here are the pics for the ZT0566
ZT0566BW for another post
Like New, no box, de-assisted, no torsion bar. I just de-assisted the knife and slipped into my pocket once. There is no much to say much about the knife.
Here are the pics for ZT0566BW
Last edited:
