coiledwire
Platinum Member
- Joined
- Aug 30, 2013
- Messages
- 1,595
Up for sale are 2 of my most favorite models. As much as I love these knives, they are not getting the pocket time they deserve. Both of these great knives are very light users. Instead of me hoarding, they should get into hands that will put them to work!
Spyderco PM2 DLC/blk + Cuscadi blue g10 scales/geared black spacer
$170 sold! pp goods and shipped within US
BM 940 + tasteful modifications + Deathgrip dark blue g10 scales
$190 pp goods and shipped within US
The only trades I would consider:
- CRKs with the following DOB: 8/16, 9/25, 12/17
- Spyderco Southard
As usual, say I'll take it here and communicate with me to start the buying process.
Contact me by PM or email, but email is preferred.
coiledwire[{at}]gmail[{dot}]com
Thanks for looking!
Details:
PM2:
This is the 2nd gen Black G10/DLC model w/ s30v steel. Not to long after getting the knife, I picked up the blue Cuscadi scales here on BF. This knife has seen some light use; cardboard was the toughest task I gave it. The DLC is in great shape and I tried to capture it in the photos. Scales have some pocket-wear, and the screw have some of the black paint lightened (but none are stripped). Sharpened by wicked edge and is still very sharp. Clip is even in great condition. The blade is left uncentered as shown in the photos because I prefer to have the blade gravity drop when lock is disengaged. Tighten the blade and centering gets better. Blade doesn't rub at all. There's a very, very faint side-to-side play, none up and down. This knife is very lightly used and is still in great condition. I think the black/blue color combo makes this PM2 look as sharp as the blade.
BM940:
I sent this knife to Kevin at Bowerbladeworks. He bronzed the purple backspacer and beadblast/stonewash the blade, and finished with a Wicked Edge. The stock green Al scales show little wear and small spots of missing anodization. Shortly after getting it back from Kevin, I was able to buy a set of dark blue g10 Deathgrip scales (made by deathofallthings here in BF). The scale is actually layered blue/black g10. But it just happens to be showing a very thin layer of blue on the flats, which gives it a dark blue color. The milled parts show the full blue g10 and gives it a racing stripe look. Very cool and unique. I asked the barrel spacers be blasted to match the blade. Same as above; cardboard is the hardest work this knife has seen. Blade is centered and very sharp, typical 940 axis lock smoothness. Also included are an assortment of BM clips.
Terms:
- Comes from a non-smoking household if that's a concern.
- Price listed is the PayPal amount (Goods) and includes shipping (US only). No paypal fees passed on to you.
- Items will be very well packaged and sent out via USPS priority to paypal verified address.
- High value orders (+$200) will have delivery signature required.
- 1st post of "I'll take it" will take precedence over any email/PM discussions, but please call 2nds, 3rds, etc, because....
- I reserve the right to do business with whom I choose, as do you. I try to verify reputations and if I don't like what I see, I'll move on to the next buyer.
- Once deal is accepted by both parties, prompt payment is required within a couple of hours unless otherwise agreed upon in our communications.
- No returns as I have no responsibility once it leaves my possession (thus the pp protection/usps insurance). Please be sure before you commit to buy!
- I will be as transparent and prompt as possible in throughout the entire transaction; I expect the same respect returned to me.
- I not responsible for knowing your local knife laws, be sure you do.
Spyderco PM2 DLC/blk + Cuscadi blue g10 scales/geared black spacer
$170 sold! pp goods and shipped within US
BM 940 + tasteful modifications + Deathgrip dark blue g10 scales
$190 pp goods and shipped within US
The only trades I would consider:
- CRKs with the following DOB: 8/16, 9/25, 12/17
- Spyderco Southard
As usual, say I'll take it here and communicate with me to start the buying process.
Contact me by PM or email, but email is preferred.
coiledwire[{at}]gmail[{dot}]com
Thanks for looking!
Details:
PM2:
This is the 2nd gen Black G10/DLC model w/ s30v steel. Not to long after getting the knife, I picked up the blue Cuscadi scales here on BF. This knife has seen some light use; cardboard was the toughest task I gave it. The DLC is in great shape and I tried to capture it in the photos. Scales have some pocket-wear, and the screw have some of the black paint lightened (but none are stripped). Sharpened by wicked edge and is still very sharp. Clip is even in great condition. The blade is left uncentered as shown in the photos because I prefer to have the blade gravity drop when lock is disengaged. Tighten the blade and centering gets better. Blade doesn't rub at all. There's a very, very faint side-to-side play, none up and down. This knife is very lightly used and is still in great condition. I think the black/blue color combo makes this PM2 look as sharp as the blade.
BM940:
I sent this knife to Kevin at Bowerbladeworks. He bronzed the purple backspacer and beadblast/stonewash the blade, and finished with a Wicked Edge. The stock green Al scales show little wear and small spots of missing anodization. Shortly after getting it back from Kevin, I was able to buy a set of dark blue g10 Deathgrip scales (made by deathofallthings here in BF). The scale is actually layered blue/black g10. But it just happens to be showing a very thin layer of blue on the flats, which gives it a dark blue color. The milled parts show the full blue g10 and gives it a racing stripe look. Very cool and unique. I asked the barrel spacers be blasted to match the blade. Same as above; cardboard is the hardest work this knife has seen. Blade is centered and very sharp, typical 940 axis lock smoothness. Also included are an assortment of BM clips.
Terms:
- Comes from a non-smoking household if that's a concern.
- Price listed is the PayPal amount (Goods) and includes shipping (US only). No paypal fees passed on to you.
- Items will be very well packaged and sent out via USPS priority to paypal verified address.
- High value orders (+$200) will have delivery signature required.
- 1st post of "I'll take it" will take precedence over any email/PM discussions, but please call 2nds, 3rds, etc, because....
- I reserve the right to do business with whom I choose, as do you. I try to verify reputations and if I don't like what I see, I'll move on to the next buyer.
- Once deal is accepted by both parties, prompt payment is required within a couple of hours unless otherwise agreed upon in our communications.
- No returns as I have no responsibility once it leaves my possession (thus the pp protection/usps insurance). Please be sure before you commit to buy!
- I will be as transparent and prompt as possible in throughout the entire transaction; I expect the same respect returned to me.
- I not responsible for knowing your local knife laws, be sure you do.
Last edited:
