I had some things come up so im selling of a few knives.
First is a spyderco tuff. I got this knife brand new a it had a crazy obtuse edge bevel, 42 to 44° for modt of the blade and at the tip It was 62°+. I decided to put a 32 inclusive on it and boy did it take forever hogging of 3v. It took me over 5 hours!!! In the pricess I wasnt being careful and went up on the ricaso before I added a sharpening notch. Now it has a mirror polished bevel and its insanely sharp to the point where it xan cut paoer towels. The knife ik pretty much brand new except the notch and the ricaso damage. Im asking $140 net, priority shipping included.
Next up is a spydefco Gayle Bradley. This knife as in like new condition, it has been stroped but there are no scratches on the blade. This is the smoothest spyderco i ever got, it sebenza smooth, it just gldes out like its on air. There is some oatina around the spydue hole and on the spine of the blade but that happens with cpm m4 since its not stainless. Comes in its original box. Asking $110 net, priority shipping included.
Finally is my Kizer 4401C prototype flipper. I git this from a kizer rep months befire these came out to the stores. This one has a different logo than present Kizers and on the back of the bkade it says china in small letters where as now they come with a china sticker. This has blue anodized frame and titanium pocket clip with a stinewashed s35vn blade. The rep toldcme tge prototypes were ran harder than production knives, at 60 to 62 hrc which is great for s35vn. I haven't had it tested so I cant confirm or deny if it is that way. I mirror polished the wadhers and added some froglube so now this thing is crazy smooth and fires out like a rocket, has very good detent with rick solid lock up at around 25% which is right where it was when I got it. I had 4 kizers and all of them had fantastic lock geometries, kizer does some oc the best locks out right now imo. I sharpened it on my edge pro and niw it has a mirror polished bevel thats really sharp. I also made the choil abigger so niw a finger fits comfortably in there. I dropping the price on this bad boy to $105 net whuch is a great deal on this knife and you won't find a better knife for the money.
first ill take it follewed by a pm gets it.
thank you fir looking and take care.
I also have a Brad Southard Avo midtech up for sale or trade. Heres the link
http://www.bladeforums.com/forums/showthread.php/1230695-FSOT-Customized-Brad-Southard-Avo
First is a spyderco tuff. I got this knife brand new a it had a crazy obtuse edge bevel, 42 to 44° for modt of the blade and at the tip It was 62°+. I decided to put a 32 inclusive on it and boy did it take forever hogging of 3v. It took me over 5 hours!!! In the pricess I wasnt being careful and went up on the ricaso before I added a sharpening notch. Now it has a mirror polished bevel and its insanely sharp to the point where it xan cut paoer towels. The knife ik pretty much brand new except the notch and the ricaso damage. Im asking $140 net, priority shipping included.
Next up is a spydefco Gayle Bradley. This knife as in like new condition, it has been stroped but there are no scratches on the blade. This is the smoothest spyderco i ever got, it sebenza smooth, it just gldes out like its on air. There is some oatina around the spydue hole and on the spine of the blade but that happens with cpm m4 since its not stainless. Comes in its original box. Asking $110 net, priority shipping included.
Finally is my Kizer 4401C prototype flipper. I git this from a kizer rep months befire these came out to the stores. This one has a different logo than present Kizers and on the back of the bkade it says china in small letters where as now they come with a china sticker. This has blue anodized frame and titanium pocket clip with a stinewashed s35vn blade. The rep toldcme tge prototypes were ran harder than production knives, at 60 to 62 hrc which is great for s35vn. I haven't had it tested so I cant confirm or deny if it is that way. I mirror polished the wadhers and added some froglube so now this thing is crazy smooth and fires out like a rocket, has very good detent with rick solid lock up at around 25% which is right where it was when I got it. I had 4 kizers and all of them had fantastic lock geometries, kizer does some oc the best locks out right now imo. I sharpened it on my edge pro and niw it has a mirror polished bevel thats really sharp. I also made the choil abigger so niw a finger fits comfortably in there. I dropping the price on this bad boy to $105 net whuch is a great deal on this knife and you won't find a better knife for the money.
first ill take it follewed by a pm gets it.
thank you fir looking and take care.
I also have a Brad Southard Avo midtech up for sale or trade. Heres the link
http://www.bladeforums.com/forums/showthread.php/1230695-FSOT-Customized-Brad-Southard-Avo
Last edited:
