FS: Tacticool Folders

OilMan

Gold Member
Feedback: +85 / =0 / -0
Joined
May 6, 2004
Messages
4,283
Lightly Carried and sharpened Hinderer 3.5" XM-18 Bead Blasted Flipper w/2 extra G10 overlays, Orange, Olive/Green, Black
Carried and sharpened on my Edgepro. I originally got it with the black overlay from Shane Sibert who had re-beadblasted the blade but had an issue with the lockup so I sent it to Rick and he replaced the Ti side and re-re blasted it and sharpened it. I got it back and have carried it a little so it has "pocket marks" on the Ti side and I also sharpened it. Tried to get good pics of the blade so you can see I didn't do too bad of a job.

I'd like to sell this as a package deal for $570 but I would split them up and go $510 on the knife with Orange G10 and $40 for the black or green G10 side. Regardless I'm not switching them to sell otherwise.

Black Scale is taken.
Green Scale is taken.
XM is taken

--------------------------------------------------------------

Excellent Condition RJ Martin Satin Recurve Devastator
Beautiful knife with excellent flipping action. Never used as far as I know but it has a little oddity in the finish just below the primary grind I tried to get a picture of. The actual grind seems to be over whatever it is and you have to hold it just so to see it. Comes with a zipper pouch.

$480 Taken pending fundage.

-------------------------------------------------------------

Excellent Condition Greg Lightfoot Catchdog, Silver G10/Black Carbon Fiber

$500 Catchdog is taken

-------------------------------------------------------------

Excellent Condition Brian Tighe Tighe Chee Flipper
Originally a bead blasted model but I sent it back to Brian to adjust the lockup and he redid the blade too. Haven't used it since it got back.

$450 taken

-------------------------------------------------------------

Dead Mint Peter Carey Rubicon XL
Blade: 3 3/4" .140" CPM154
Frame: .065" 6ALYV Green Anodized Ti
Bolster: Twist Damascus
Scale: Carbon Fiber
Ti Clip, Standoffs, Thumbstuds. All Ano Green
Set up for tip up. Dead Mint, Never used. Comes in pouch.

$500 Taken

-------------------------------------------------------------

Left Side:
Excellent Condition Mike Obenauf Small Model 4, Sharpened by Tom Krein
Beautiful knife, hasn't been touched since Tom sharpened it. Excellent Condition.

$380

--------------------------------------------------------------

Right Side:
Lightly Carried and sharpened Strider Numbered Tanto SMF, #75
Sharpened on my Sharpmaker. Excellent condition although has the usual Stridermarks.

$450

---------------------------------------------------------------

ForSale10_07_01.gif


ForSale10_07_02.gif


ForSale10_07_03.gif


ForSale10_07_04.gif


ForSale10_07_05.gif


ForSale10_07_06.gif


ForSale10_07_07.gif


ForSale10_07_08.gif


ForSale10_07_09.gif


I can take Paypal +3% (paypal at mckean dot com) or Postal MOs. Shipping/Insurance is included in the CONUS. I will only sell to people 18 years of age or older and that has a good rep here or at one of the forums I hang out at. No newbies unfortunately.


Let me know if you have any questions/comments/complaints and I'll do my best to get you answers.

thanks,

Greg McKean
OilMan
 
Is the bolster on that Rubicon XL really damascus. To me it looks just like a normal titanium bolster unless there is something in the picture I am missing.

Thanks
 
It looks like damascus in the 5th and 6th picture. The 6th picture pretty clearly shows the damascus texture.

Some great knives at decent prices here . . . .
 
I think all messages are responded to, if you didn't get a reply please shoot me another message. (Besides Eddie, my replies to you keep bouncing. I'll try to pm you in a minute.)

As to the bolsters on the Carey, yes, they are real damascus. Here's some pics Peter took originally.


Ruby_xl_grn_ano_(600_x_450).jpg


Ruby_xl_grn_ano_closed_(600_x_450).jpg


Ruby_xl_grn_ano_side_(600_x_450).jpg
 
I'll take the Rubicon XL if available. I could paypal as soon as I hear from you. Thanks, MT

I'm waiting to hear back from one guy but if he passes it's yours.

thanks,

Greg

ps. Eddie, you also aren't accepting PMs. Unfortunately I'm not interested in that trade. Thanks.
 
Greg,

Apparently not. Checked a few moments ago, and nothing there. Can you re-send to xeodguy at hotmail dot com? I don't seem to have problems with that one. Thanks much.

Gary
 
Back
Top