Hello all,
I am selling off THE ULTIMATE CENTURION PACKAGE.
Included is the following (cue drooling):
**One FULLY NP3'd (internals, frame, everything!) 96G (DA/SA) Centurion**
Details:
-Pistol was a police trade in purchased on-line. The mechanics of it were great but the finish was sub-par (as we usually see with police trade-ins). Thus, I opted to refinish it!
-Trijicons were relamped (both front and rear) less than six months ago by tooltech.
-Hogue Panel grips currently attached.
-Centurion was sent to Robar by ME, and was recieved in the same timeframe roughly. There is one small flaw in the finish that I can see -- see pics below for detail. It is minor.
-Pistol has never been carried, it has been on "nightstand duty" and "ooh and aah at the range over np3" duty. It has been fired at the range, probably 200 rounds by me. The ONLY issues I've encountered is that with a fully loaded mag, I have encountered a few FTF's on the initial mag. Forum goers here, local friends, and the staff at the range all seem to agree that the mags are too tight. I'm sure this would be an easy fix. I have NEVER had this pistol jam on me during firing, even at full all out rapid fire.
-Pistol includes FIVE magazines. Two are 11-rounders, one of which has been NP3'd and one of which is still stock and it needs a new spring. The other 3 are 10 rounders also NP3'd and do not need new springs (as mentioned before, they might even be a touch tight).
**Also included**
-One RAFTER S IWB holster, black cowhide rough finish. It was initially custom made for a px4 (it has stamps indicating so) and fit my PX4 9mm perfectly. However, it also fits the 96 Centurion very well! (see pics below for details). I would not hesitate to carry this pistol/holster combo (but again, I have not). At this time I believe this holster would cost you 54.00 plus wait plus
-Two extra centurion guide rods, NP3'd
-Two extra sets of grip screws w/ washers, NP3'd
-One generic (I believe it came from a Taurus or something) speedloader. It's not perfect but it works and the only Beretta brand one I have is for a 9mm.
So let's total that up. The package includes:
-1 Totally Awesome, Amazing NP3 Centurion
-1 Rafter S Gunleather IWB Holster
-5 Magazines (4 np3, 1 standard....3 10-rounders, 2 11-rounders)
-2 NP3 Guide Rods
-2 NP3 Grip screw sets (four screws per set) with washers
Wow. Could you ask for much more? I don't think you could.
The entire package will be priced to move at 850.00 shipped from me to your FFL. If you add up the cost of everything here you will see I have quite a bit more than that in it -- this is a steal of a deal imo...you're getting probably over 1k worth of stuff here if I totalled it all up, not even counting all the shipping I've paid for between Robar and Tooltech.
Only trades I would consider are an excellent condition USP Compact, .45 preferred please.
If you'd like to purchase this, "I'll take it" in the thread will get precedence. We will then discuss payment options via PM or by phone, I will require both your phone number and I will give you mine. Likewise, I will require it to be shipped directly to an FFL (unless face-to-face), will need a copy of FFL, etc etc etc.
Please enjoy the pictures, I'm sorry they are not better but I am not a pro I just pretty much point and click.
(note the small mark I mentioned)
I am selling off THE ULTIMATE CENTURION PACKAGE.
Included is the following (cue drooling):
**One FULLY NP3'd (internals, frame, everything!) 96G (DA/SA) Centurion**
Details:
-Pistol was a police trade in purchased on-line. The mechanics of it were great but the finish was sub-par (as we usually see with police trade-ins). Thus, I opted to refinish it!
-Trijicons were relamped (both front and rear) less than six months ago by tooltech.
-Hogue Panel grips currently attached.
-Centurion was sent to Robar by ME, and was recieved in the same timeframe roughly. There is one small flaw in the finish that I can see -- see pics below for detail. It is minor.
-Pistol has never been carried, it has been on "nightstand duty" and "ooh and aah at the range over np3" duty. It has been fired at the range, probably 200 rounds by me. The ONLY issues I've encountered is that with a fully loaded mag, I have encountered a few FTF's on the initial mag. Forum goers here, local friends, and the staff at the range all seem to agree that the mags are too tight. I'm sure this would be an easy fix. I have NEVER had this pistol jam on me during firing, even at full all out rapid fire.
-Pistol includes FIVE magazines. Two are 11-rounders, one of which has been NP3'd and one of which is still stock and it needs a new spring. The other 3 are 10 rounders also NP3'd and do not need new springs (as mentioned before, they might even be a touch tight).
**Also included**
-One RAFTER S IWB holster, black cowhide rough finish. It was initially custom made for a px4 (it has stamps indicating so) and fit my PX4 9mm perfectly. However, it also fits the 96 Centurion very well! (see pics below for details). I would not hesitate to carry this pistol/holster combo (but again, I have not). At this time I believe this holster would cost you 54.00 plus wait plus
-Two extra centurion guide rods, NP3'd
-Two extra sets of grip screws w/ washers, NP3'd
-One generic (I believe it came from a Taurus or something) speedloader. It's not perfect but it works and the only Beretta brand one I have is for a 9mm.
So let's total that up. The package includes:
-1 Totally Awesome, Amazing NP3 Centurion
-1 Rafter S Gunleather IWB Holster
-5 Magazines (4 np3, 1 standard....3 10-rounders, 2 11-rounders)
-2 NP3 Guide Rods
-2 NP3 Grip screw sets (four screws per set) with washers
Wow. Could you ask for much more? I don't think you could.
The entire package will be priced to move at 850.00 shipped from me to your FFL. If you add up the cost of everything here you will see I have quite a bit more than that in it -- this is a steal of a deal imo...you're getting probably over 1k worth of stuff here if I totalled it all up, not even counting all the shipping I've paid for between Robar and Tooltech.
Only trades I would consider are an excellent condition USP Compact, .45 preferred please.
If you'd like to purchase this, "I'll take it" in the thread will get precedence. We will then discuss payment options via PM or by phone, I will require both your phone number and I will give you mine. Likewise, I will require it to be shipped directly to an FFL (unless face-to-face), will need a copy of FFL, etc etc etc.
Please enjoy the pictures, I'm sorry they are not better but I am not a pro I just pretty much point and click.
(note the small mark I mentioned)