FS:Yuna Hard1 Flipper

OilMan

OilMan

Gold Member
Feedback: +85 / =0 / -0
Joined
May 6, 2004
Messages
4,283
Yuna Hard 1 Flipper Framelock - Picked it up second hand from a dealer and sent it to Yun to adjust the lockup. While he had it he completely redid the finish and it's as close to mint as it gets. (I didn't think it was bad before though really.) As per Yun this model features his combat lock-up and is meant for fighting. Comes in a pouch/case from Yun and includes the Pivot wrench I bought from him too.

$450

YunaHard1_04.gif


YunaHard1_05.gif


YunaHard1_03.gif



Let me know if you have any questions or need different/bigger/better pics. Shipping is included in the CONUS.

I can take paypal + 3% (paypal at mckean dot com) or Postal MOs too.

Thanks,

Greg
 
This is a very nice knife at a price below what the maker sells it for. He is one of the few makers I know of that uses ZDP-189 laminates; I believe this one is ZDP-189 core with ATS-34 on he outside. If you are a ZDP-189 fan, this is a very interesting knife.

Does it have the standard dimensions for the Hard 1 series? (i.e., 4 inch blade, 5-1/2 inch closed, 8-3/4 total open length)
 
I'm not sure off the top of my head but I'll measure it tonight and check. It should be the standard size though I would think.
 
Blade Length is 3 1/2", closed length is roughly 5 1/4", and open length is 8 3/4". Blade length was measured from the tip of the handle to the tip of the blade. Yun's site says 4" from tip to flipper. I would guess they are the same.

thanks,

Greg
 
Doh, sorry Dan. Between my main pc being down for an "upgrade" and work I kinda forgot about this thread. I'll get pics of it when I get home tonight.

thanks,

Greg
 
You must log in or register to reply here.
Back
Top