- Joined
- Aug 4, 2013
- Messages
- 802
Up for sale and trade are my:
I will accept trades but only for what I am looking for (theres a list below)
I prefer paypal
Pics upon request via email
Spyderco large lum chinese g10 folder, this one was carried maybe 2-3 times and has very slight wear on clip. It is centered perfectly, locks up around 55%. has box and papers. Disclaimer: I am the second owner of this knife as I got it here on the forums, that being said there is a slight line on the side with the lum logo, and it is hard to capture in pictures this is NOT a line from use, it looks to be from factory that way. The best way to describe this line is that it kind of looks like the line you would see near the edge on a blade made of aogami super blue from spyderco, this line is NOT visible from looking at the blade straight on and has to be seen with a lot of light or when turned in the light at an angle.
STYD,$96.00 $86.00
Benchmade 755 MPR (Black coated blade), this one is a light user and shows some wear on the Ti clip and a very light snail trail on the Ti near pivot. Other than that it's smooth, centered and SHARP, solid lockup no blade play. This one was sharpened by the previous owner and one side of the bevel is slightly higher than the other but it is purely cosmetic as this is absolutely hair-shaving sharp. There is some wear in the coating, it is a small thin row of hairline scratches where the sibert logo is and over the US patent no. there is also a small wear in coating below the benchmade logo on the opposite side of the blade.
STYD,$160.00 $150.00
Both knives STYD $216.00
These are the trades I will accept, Other than these I am not looking for much else.
*all knives wanted are Plain Edge models only*
Trade both for:
Spyderco:
Domino
Southard
Protech Tr-3 manual
Bradley alias I
Trade + cash (depending on knife)
Spyderco:
g10 manix 2
techno
Endura/Delica Waved or super blue models
Salt I/ Pacific Salt
Sage 2
ZT 0801
Scales for a ZT 0550
lionsteel sr1a/2a
Benchmade 551 only looking for black handles or the h20 model
Benchmade 300-1 Ball axis blue/black g10 flipper
Hogue ex01/02 must be 3.5" blade (no tantos, only g10 or aluminum models)
Brous Bionic flipper
If you have an offer that fits these or would like to buy them PM me, or email at Snakeshit_m18 at yahoodot com. Please include your username in email.
Thanks for looking and have a great night.
-Nick
I will accept trades but only for what I am looking for (theres a list below)
I prefer paypal
Pics upon request via email
Spyderco large lum chinese g10 folder, this one was carried maybe 2-3 times and has very slight wear on clip. It is centered perfectly, locks up around 55%. has box and papers. Disclaimer: I am the second owner of this knife as I got it here on the forums, that being said there is a slight line on the side with the lum logo, and it is hard to capture in pictures this is NOT a line from use, it looks to be from factory that way. The best way to describe this line is that it kind of looks like the line you would see near the edge on a blade made of aogami super blue from spyderco, this line is NOT visible from looking at the blade straight on and has to be seen with a lot of light or when turned in the light at an angle.
STYD,
Benchmade 755 MPR (Black coated blade), this one is a light user and shows some wear on the Ti clip and a very light snail trail on the Ti near pivot. Other than that it's smooth, centered and SHARP, solid lockup no blade play. This one was sharpened by the previous owner and one side of the bevel is slightly higher than the other but it is purely cosmetic as this is absolutely hair-shaving sharp. There is some wear in the coating, it is a small thin row of hairline scratches where the sibert logo is and over the US patent no. there is also a small wear in coating below the benchmade logo on the opposite side of the blade.
STYD,
Both knives STYD $216.00
These are the trades I will accept, Other than these I am not looking for much else.
*all knives wanted are Plain Edge models only*
Trade both for:
Spyderco:
Domino
Southard
Protech Tr-3 manual
Bradley alias I
Trade + cash (depending on knife)
Spyderco:
g10 manix 2
techno
Endura/Delica Waved or super blue models
Salt I/ Pacific Salt
Sage 2
ZT 0801
Scales for a ZT 0550
lionsteel sr1a/2a
Benchmade 551 only looking for black handles or the h20 model
Benchmade 300-1 Ball axis blue/black g10 flipper
Hogue ex01/02 must be 3.5" blade (no tantos, only g10 or aluminum models)
Brous Bionic flipper
If you have an offer that fits these or would like to buy them PM me, or email at Snakeshit_m18 at yahoodot com. Please include your username in email.
Thanks for looking and have a great night.
-Nick
Last edited: