FSOT: Hinderer, ADV, Kershaw, Strider

OilMan

Gold Member
Feedback: +86 / =0 / -0
Joined
May 6, 2004
Messages
4,284
Rick Hinderer Production Eklipse - Lightly carried, flips like a Hinderer. Original Edge I believe. No box.
$600 Traded

RHK_Prod_Eklipse_Blk_001.jpg


RHK_Prod_Eklipse_Blk_002.jpg


RHK_Prod_Eklipse_Blk_003.jpg


RHK_Prod_Eklipse_Blk_004.jpg


RHK_Prod_Eklipse_Blk_005.jpg


RHK_Prod_Eklipse_Blk_006.jpg


RHK_Prod_Eklipse_Blk_007.jpg


RHK_Prod_Eklipse_Blk_008.jpg


RHK_Prod_Eklipse_Blk_009.jpg



ADV Production Butcher TRADED
$400
Big Boy of a knife, awesome flipper. Lightly carried. Some wear in the finish which should be visible in the pics. It has a slight flattening on a small section of the fuller grind in the same location on both sides which are hard to see and don't show up in the pics very well. I'm not the first owner so I don't know if its like that from ADV or if something was done to it after it left. I've marked in the last picture the location on the blade and it's slightly more pronounced on the side I took the close up of. Comes with ADV pouch.


Kershaw Mini Cyclone in ZPD and Ti. TRADED
$180
Sharpened/thinned out on EdgePro. It had a factory low spot near the choil before I started and I didn't want to remove any more metal than I had to to fix it at that time so there is a small not quite sharp part. It will come out with a couple of sharpenings. The last pics should show it as much as possible.
The wetness is WD-40 and you can't look at the DLC without it smudging..


Strider Ranger Green Recurve SMF
$415
Sharpened/thinned edge and carried, good lockup, off center but not rubbing.
StriderGrnRecurve_SMF_001.jpg


StriderGrnRecurve_SMF_002.jpg


StriderGrnRecurve_SMF_003.jpg


StriderGrnRecurve_SMF_004.jpg


StriderGrnRecurve_SMF_005.jpg


StriderGrnRecurve_SMF_006.jpg


StriderGrnRecurve_SMF_007.jpg


StriderGrnRecurve_SMF_008.jpg


StriderGrnRecurve_SMF_009.jpg


Disclaimer: I reserve the right to refuse trade without explanation. I can take Standard Paypal and Postal MOs. You must be 18 years of age and the knife must be legal to own by you and in your municipality of residence. I ship USPS Priority Insured w/tracking within the CONUS. I might ship outside but I won't lie on any Customs forms. PM me here or send me an email @ bladeforums//@//mckean\\dot\\com with any questions/comments/complaints.


The main trade items I'm looking for.. (Might be able to do cash up or down depending on when you catch me.)
NO COMBO OR SERRATED EDGES, AUTOs, BALIs

Strider CC SMF with SOLID lockup, Black Tantos and/or Stonewashed blade Preferred Preferred
ZT 0392BWBRZ, 0630/CF, 0560BW
Busse Boss Street NMSFNO or SFNO, not one of the gold/bronze looking ones
Fehrman First Strike
Nicer G-Shocks and Seiko Chronos

Thanks,

Greg (bladeforums AT McKean DoT COM)
 
Last edited:
ADV Butcher and Kershaw Mini Cyclone traded. Hinderer and Strider still available.

thanks,

Greg
 
Adding this:
Reate District 9 - If it's lightly carried by the previous owner I can't tell. Flips with authority and centers up perfectly, very nice beefy Tanto Flipper. I traded into 2 of these and I'm keeping the dressier one for myself. Comes in a Reate zippered pouch. This is China doing it right.
$175

Reate_District9_001.jpg


Reate_District9_002.jpg


Reate_District9_003.jpg


Reate_District9_004.jpg


Reate_District9_005.jpg


Reate_District9_006.jpg


Reate_District9_007.jpg


Reate_District9_008.jpg


Reate_District9_009.jpg


Same criteria on trades as above.

Thanks,

Greg
 
Rick Hinderer Production Eklipse - Lightly carried, flips like a Hinderer. Original Edge I believe. No box.
$600 Traded
 
Back
Top