- Joined
- Jun 11, 2012
- Messages
- 6,973
TERMS OF SALE --- PLEASE READ CAREFULLY
- All knives for sale by myself will include complementary edge re-profiling and/or sharpening, declining this service will discount the total price of the knife by $20 on request via PM or email.
- ALL SHARPENING WORK IS GUARANTEED! --- IF YOU ARE NOT HAPPY WITH THE RESULTS FOR ANY REASON (HIGHLY UNLIKELY!!) > RETURNS ACCEPTED FOR FULL REFUND
- Knives which have already been used and/or been re-profiled by myself or others will always be described as such so please read the description of each knife carefully, most knives from my collection are going to be factory new condition.
- I will work with you via PM or email in order to select the proper edge geometry for what you intend to use the knife for, which will allow for the highest combination cutting ability and edge retention while still assuring sufficient strength for durability.
- I do all sharpening work personally on my Tormek T-8 grinder, which uses a water trough to submerge and cool the grinding wheel in order to guarantee that there is no heat transfer to the edge in grinding and guarantees zero chances of affecting heat treatment.
- My V-grind edges will have a VERY slight hollow shape to the edge but it is so close to being flat that it is virtually undetectable without carefully measuring and looking for it specifically, this means the edge will not be measurably weaker because it is slightly hollow shaped
Busse Combat - Trustee Warden
BRAND NEW
FREE EDGE REPROFILING AND/OR SHARPENING SERVICE INCLUDED + MONEY BACK GUARANTEE!
- Shark Edition Cerakote Finish
- G-10 Handle (Cannot Be Seen Under Cerakote)
Excerpt From Jerry Busse : https://www.bladeforums.com/threads...ednesday-july-27-2022-at-9pm-eastern.1883005/
Specifications:
OAL = Approx 7.625”
Blade Length: Approx. 3.4"
Thickness: Approx. .160"
Blade Steel: INFI
Hardness: 58-60 Rc
Bevel: Flat Saber
Busse Combat Regular Retail Price: $329.00 + $14.95 Shipping = $343.95
Father & Son's Re-Profiled Edge : $30
STANDARD RETAIL PRICING TOTAL: $373.95 ------ YOU SAVE $88.95!
Asking $285 Shipped TYD via Paypal or USPS Money Order
------------------------------------------------------------------------------------------------------------------------
Busse Combat - Trustee Warden
BRAND NEW
FREE EDGE REPROFILING AND/OR SHARPENING SERVICE INCLUDED + MONEY BACK GUARANTEE!
- Hand-Applied Satin Finish
- Green Canvas Micarta Handle
Excerpt From Jerry Busse : https://www.bladeforums.com/threads...g-sunday-3-20-2022-at-9-00pm-eastern.1863343/
Specifications:
OAL = Approx 7.625”
Blade Length: Approx. 3.4"
Thickness: Approx. .160"
Blade Steel: INFI
Hardness: 58-60 Rc
Bevel: Flat Saber
Busse Combat Regular Retail Price: $307.00 + $14.95 Shipping = $321.95
Father & Son's Re-Profiled Edge : $30
STANDARD RETAIL PRICING TOTAL: $351.95 -------- YOU SAVE 66.95!
Asking $285 Shipped TYD via Paypal or USPS Money Order
-----------------------------------------------------------------------------------------------------------
Busse Combat - HOG Badger (Battle Grade)
LIKE NEW CONDITION - SOME LIGHT PATINA CAN BE SEEN ON FACTORY EDGE
FREE EDGE REPROFILING AND/OR SHARPENING SERVICE INCLUDED + MONEY BACK GUARANTEE!
- Desert Sage Powder Coating Finish
- Black Canvas Micarta Handle
Original Sales Thread : https://www.bladeforums.com/threads...ricing-coming-this-wednesday-11-1-17.1529914/
Specifications:
Blade Length: Approx. 5.9"
Over All Length: Approx. 10.9"
Thickness: Approx. 210"
Steel: SR-101
Hardness: 58-60 Rc
Grind: Flat Saber
Busse Combat Regular Retail Price: $237 + $14.95 Shipping = $251.95
Father & Son's Re-Profiled Edge : $30
Total Retail Value: $281.95
Asking $285 Shipped TYD via Paypal or USPS Money Order
------------------------------------------------------------------------------------------------------------------------
Busse Custom Shop - Spear Point Elmax Slicer Variant w/ Mashed Cat Outfitters Sheath
BRAND NEW AS RECEIVED FROM BUSSE
FREE EDGE REPROFILING AND/OR SHARPENING SERVICE INCLUDED + MONEY BACK GUARANTEE!
- Hand-Applied Satin Finish
- Giraffe Bone Inlays w/ Hand-Smoothed Blue & Black G-10
Excerpt From Jerry Busse : https://www.bladeforums.com/threads...-sunday-4-18-2021-at-9-00-pm-eastern.1785728/
"SliceOganzaaaa!!!!
All blades are made from ELMAX steel and have undergone our extensive heat-treat protocol designed specifically for maximum edge holding! They are coming in at 60-62 Rc. These ultra-thin slicers are .090" thick with an edge thickness of approximately .010" prior to sharpening!!!! That's about 3 sheets of paper thick prior to sharpening!!! Yowza!!!"
Original Sales Thread : https://www.bladeforums.com/threads...nesday-june-2-2021-at-9-00pm-eastern.1792398/
Specifications:
Overall Length : 8.08”
Blade Length : approx. 3.58”
Blade Width (At Widest Part): 1 3/8"
Thickness: Approx. .090"
Steel: Elmax
Finish: Hand Applied Satin
Bevel: Flat Saber
Hardness: 60-62 Rc
Busse Combat Regular Retail Price: $340 + $14.95 Shipping = $354.95
Mashed Cat Boltatron Sheath w/ Brass Eyelets: $45 + $10 Shipping = $55
Father & Son's Re-Profiled Edge : $30
Total Retail Value: $439.95. YOU SAVE $43.95!!
Asking $396 Shipped TYD via Paypal or USPS Money Order
------------------------------------------------------------------------------------------------------------------------
Busse Custom Shop - Elmax Slicer Variant
BRAND NEW
FREE EDGE REPROFILING AND/OR SHARPENING SERVICE INCLUDED + MONEY BACK GUARANTEE!
- Hand-Applied Satin Finish
- Stabilized Hardwood Wood Inlays w/ Red & Black G-10
Excerpt From Jerry Busse : https://www.bladeforums.com/threads...-sunday-4-18-2021-at-9-00-pm-eastern.1785728/
"SliceOganzaaaa!!!!
All blades are made from ELMAX steel and have undergone our extensive heat-treat protocol designed specifically for maximum edge holding! They are coming in at 60-62 Rc. These ultra-thin slicers are .090" thick with an edge thickness of approximately .010" prior to sharpening!!!! That's about 3 sheets of paper thick prior to sharpening!!! Yowza!!!"
Original Sales Thread : https://www.bladeforums.com/threads...nesday-june-2-2021-at-9-00pm-eastern.1792398/
Specifications:
Overall Length : 8.5”
Blade Length : approx. 4”
Blade Width (At Widest Part): 1 3/8"
Thickness: Approx. .090"
Steel: Elmax
Finish: Hand Applied Satin
Bevel: Flat Saber
Hardness: 60-62 Rc
Busse Combat Regular Retail Price: $350 + $14.95 Shipping = $364.95
Father & Son's Re-Profiled Edge : $30
Total Retail Value: $394.95 ------- YOU SAVE $109.95!
Asking $285 Shipped TYD via Paypal or USPS Money Order
- All knives for sale by myself will include complementary edge re-profiling and/or sharpening, declining this service will discount the total price of the knife by $20 on request via PM or email.
- ALL SHARPENING WORK IS GUARANTEED! --- IF YOU ARE NOT HAPPY WITH THE RESULTS FOR ANY REASON (HIGHLY UNLIKELY!!) > RETURNS ACCEPTED FOR FULL REFUND
- Knives which have already been used and/or been re-profiled by myself or others will always be described as such so please read the description of each knife carefully, most knives from my collection are going to be factory new condition.
- I will work with you via PM or email in order to select the proper edge geometry for what you intend to use the knife for, which will allow for the highest combination cutting ability and edge retention while still assuring sufficient strength for durability.
- I do all sharpening work personally on my Tormek T-8 grinder, which uses a water trough to submerge and cool the grinding wheel in order to guarantee that there is no heat transfer to the edge in grinding and guarantees zero chances of affecting heat treatment.
- My V-grind edges will have a VERY slight hollow shape to the edge but it is so close to being flat that it is virtually undetectable without carefully measuring and looking for it specifically, this means the edge will not be measurably weaker because it is slightly hollow shaped
Busse Combat - Trustee Warden
BRAND NEW
FREE EDGE REPROFILING AND/OR SHARPENING SERVICE INCLUDED + MONEY BACK GUARANTEE!
- Shark Edition Cerakote Finish
- G-10 Handle (Cannot Be Seen Under Cerakote)
Excerpt From Jerry Busse : https://www.bladeforums.com/threads...ednesday-july-27-2022-at-9pm-eastern.1883005/
Specifications:
OAL = Approx 7.625”
Blade Length: Approx. 3.4"
Thickness: Approx. .160"
Blade Steel: INFI
Hardness: 58-60 Rc
Bevel: Flat Saber
Busse Combat Regular Retail Price: $329.00 + $14.95 Shipping = $343.95
Father & Son's Re-Profiled Edge : $30
STANDARD RETAIL PRICING TOTAL: $373.95 ------ YOU SAVE $88.95!
Asking $285 Shipped TYD via Paypal or USPS Money Order
------------------------------------------------------------------------------------------------------------------------
Busse Combat - Trustee Warden
BRAND NEW
FREE EDGE REPROFILING AND/OR SHARPENING SERVICE INCLUDED + MONEY BACK GUARANTEE!
- Hand-Applied Satin Finish
- Green Canvas Micarta Handle
Excerpt From Jerry Busse : https://www.bladeforums.com/threads...g-sunday-3-20-2022-at-9-00pm-eastern.1863343/
Specifications:
OAL = Approx 7.625”
Blade Length: Approx. 3.4"
Thickness: Approx. .160"
Blade Steel: INFI
Hardness: 58-60 Rc
Bevel: Flat Saber
Busse Combat Regular Retail Price: $307.00 + $14.95 Shipping = $321.95
Father & Son's Re-Profiled Edge : $30
STANDARD RETAIL PRICING TOTAL: $351.95 -------- YOU SAVE 66.95!
Asking $285 Shipped TYD via Paypal or USPS Money Order
-----------------------------------------------------------------------------------------------------------
Busse Combat - HOG Badger (Battle Grade)
LIKE NEW CONDITION - SOME LIGHT PATINA CAN BE SEEN ON FACTORY EDGE
FREE EDGE REPROFILING AND/OR SHARPENING SERVICE INCLUDED + MONEY BACK GUARANTEE!
- Desert Sage Powder Coating Finish
- Black Canvas Micarta Handle
Original Sales Thread : https://www.bladeforums.com/threads...ricing-coming-this-wednesday-11-1-17.1529914/
Specifications:
Blade Length: Approx. 5.9"
Over All Length: Approx. 10.9"
Thickness: Approx. 210"
Steel: SR-101
Hardness: 58-60 Rc
Grind: Flat Saber
Busse Combat Regular Retail Price: $237 + $14.95 Shipping = $251.95
Father & Son's Re-Profiled Edge : $30
Total Retail Value: $281.95
Asking $285 Shipped TYD via Paypal or USPS Money Order
------------------------------------------------------------------------------------------------------------------------
Busse Custom Shop - Spear Point Elmax Slicer Variant w/ Mashed Cat Outfitters Sheath
BRAND NEW AS RECEIVED FROM BUSSE
FREE EDGE REPROFILING AND/OR SHARPENING SERVICE INCLUDED + MONEY BACK GUARANTEE!
- Hand-Applied Satin Finish
- Giraffe Bone Inlays w/ Hand-Smoothed Blue & Black G-10
Excerpt From Jerry Busse : https://www.bladeforums.com/threads...-sunday-4-18-2021-at-9-00-pm-eastern.1785728/
"SliceOganzaaaa!!!!
All blades are made from ELMAX steel and have undergone our extensive heat-treat protocol designed specifically for maximum edge holding! They are coming in at 60-62 Rc. These ultra-thin slicers are .090" thick with an edge thickness of approximately .010" prior to sharpening!!!! That's about 3 sheets of paper thick prior to sharpening!!! Yowza!!!"
Original Sales Thread : https://www.bladeforums.com/threads...nesday-june-2-2021-at-9-00pm-eastern.1792398/
Specifications:
Overall Length : 8.08”
Blade Length : approx. 3.58”
Blade Width (At Widest Part): 1 3/8"
Thickness: Approx. .090"
Steel: Elmax
Finish: Hand Applied Satin
Bevel: Flat Saber
Hardness: 60-62 Rc
Busse Combat Regular Retail Price: $340 + $14.95 Shipping = $354.95
Mashed Cat Boltatron Sheath w/ Brass Eyelets: $45 + $10 Shipping = $55
Father & Son's Re-Profiled Edge : $30
Total Retail Value: $439.95. YOU SAVE $43.95!!
Asking $396 Shipped TYD via Paypal or USPS Money Order
------------------------------------------------------------------------------------------------------------------------
Busse Custom Shop - Elmax Slicer Variant
BRAND NEW
FREE EDGE REPROFILING AND/OR SHARPENING SERVICE INCLUDED + MONEY BACK GUARANTEE!
- Hand-Applied Satin Finish
- Stabilized Hardwood Wood Inlays w/ Red & Black G-10
Excerpt From Jerry Busse : https://www.bladeforums.com/threads...-sunday-4-18-2021-at-9-00-pm-eastern.1785728/
"SliceOganzaaaa!!!!
All blades are made from ELMAX steel and have undergone our extensive heat-treat protocol designed specifically for maximum edge holding! They are coming in at 60-62 Rc. These ultra-thin slicers are .090" thick with an edge thickness of approximately .010" prior to sharpening!!!! That's about 3 sheets of paper thick prior to sharpening!!! Yowza!!!"
Original Sales Thread : https://www.bladeforums.com/threads...nesday-june-2-2021-at-9-00pm-eastern.1792398/
Specifications:
Overall Length : 8.5”
Blade Length : approx. 4”
Blade Width (At Widest Part): 1 3/8"
Thickness: Approx. .090"
Steel: Elmax
Finish: Hand Applied Satin
Bevel: Flat Saber
Hardness: 60-62 Rc
Busse Combat Regular Retail Price: $350 + $14.95 Shipping = $364.95
Father & Son's Re-Profiled Edge : $30
Total Retail Value: $394.95 ------- YOU SAVE $109.95!
Asking $285 Shipped TYD via Paypal or USPS Money Order