- Joined
- Jun 11, 2012
- Messages
- 6,973
TERMS OF SALE --- PLEASE READ CAREFULLY
All knives for sale by myself will include a free re-profiling and/or sharpening, if you do not need or want this then I will discount the total price of the knife by $20 on request via PM or email.
- Unless stated otherwise in the individual description of each specific knife listed, all knives are in factory new condition... though they are not necessarily in *perfect* for various reasons (I generally have not seen perfection in any knife)
- Knives which have already been used and/or been re-profiled by myself or others will always be described as such so please read the description of each knife carefully, most knives from my collection are going to be factory new condition.
- I will work with you via PM or email in order to select the proper edge geometry for what you intend to use the knife for, which will allow for the highest combination cutting ability and edge retention while still assuring sufficient strength of the edge.
- I do all sharpening work personally on my Tormek T-8 grinder, which uses a water trough to submerge and cool the grinding wheel in order to guarantee that there is no heat transfer to the edge in grinding and thereby zero chance of affecting heat treatment.
- I can generally do a convex or V-grind edge profile on most knives but some knives cannot be done without additional work using manual grinding on select waterstones, please contact me for the specified knife to enquire about which edge shape you prefer.
- My V-grind edges will have a VERY slight hollow shape to the edge but it is so close to being flat that it is virtually undetectable without carefully measuring and looking for it specifically, this means the edge will not be weak because of the slight hollow as some may fear.
Busse Combat - Trustee Warden
BRAND NEW
FREE EDGE REPROFILING AND/OR SHARPENING SERVICE INCLUDED + MONEY BACK GUARANTEE!
- Shark Edition Cerakote Finish
- G-10 Handle (Cannot Be Seen Under Cerakote)
Excerpt From Jerry Busse : https://www.bladeforums.com/threads...ednesday-july-27-2022-at-9pm-eastern.1883005/
Specifications:
OAL = Approx 7.625”
Blade Length: Approx. 3.4"
Thickness: Approx. .160"
Blade Steel: INFI
Hardness: 58-60 Rc
Bevel: Flat Saber
Busse Combat Regular Retail Price: $329.00 + $14.95 Shipping = $343.95
Father & Son's Re-Profiled Edge : $30
STANDARD RETAIL PRICING TOTAL: $373.95 ------ YOU SAVE $88.95!
Asking $285 Shipped TYD via Paypal or USPS Money Order
------------------------------------------------------------------------------------------------------------------------
Busse Combat - Trustee Warden
BRAND NEW
FREE EDGE REPROFILING AND/OR SHARPENING SERVICE INCLUDED + MONEY BACK GUARANTEE!
- Hand-Applied Satin Finish
- Green Canvas Micarta Handle
Excerpt From Jerry Busse : https://www.bladeforums.com/threads...g-sunday-3-20-2022-at-9-00pm-eastern.1863343/
Specifications:
OAL = Approx 7.625”
Blade Length: Approx. 3.4"
Thickness: Approx. .160"
Blade Steel: INFI
Hardness: 58-60 Rc
Bevel: Flat Saber
Busse Combat Regular Retail Price: $307.00 + $14.95 Shipping = $321.95
Father & Son's Re-Profiled Edge : $30
STANDARD RETAIL PRICING TOTAL: $351.95 -------- YOU SAVE 66.95!
Asking $285 Shipped TYD via Paypal or USPS Money Order
-----------------------------------------------------------------
Busse Combat - HOG Badger (Battle Grade)
LIKE NEW CONDITION - SOME LIGHT PATINA CAN BE SEEN ON FACTORY EDGE
FREE EDGE REPROFILING AND/OR SHARPENING SERVICE INCLUDED + MONEY BACK GUARANTEE!
- Desert Sage Powder Coating Finish
- Black Canvas Micarta Handle
Original Sales Thread : https://www.bladeforums.com/threads...ricing-coming-this-wednesday-11-1-17.1529914/
Specifications:
Blade Length: Approx. 5.9"
Over All Length: Approx. 10.9"
Thickness: Approx. 210"
Steel: SR-101
Hardness: 58-60 Rc
Grind: Flat Saber
Busse Combat Regular Retail Price: $237 + $14.95 Shipping = $251.95
Father & Son's Re-Profiled Edge : $30
Total Retail Value: $281.95
Asking $285 Shipped TYD via Paypal or USPS Money Order
------------------------------------------------------------------------------------------------------------------------
Busse Custom Shop - Elmax Slicer Variant
BRAND NEW
FREE EDGE REPROFILING AND/OR SHARPENING SERVICE INCLUDED + MONEY BACK GUARANTEE!
- Hand-Applied Satin Finish
- Stabilized Hardwood Wood Inlays w/ Red & Black G-10
Excerpt From Jerry Busse : https://www.bladeforums.com/threads...-sunday-4-18-2021-at-9-00-pm-eastern.1785728/
"SliceOganzaaaa!!!!
All blades are made from ELMAX steel and have undergone our extensive heat-treat protocol designed specifically for maximum edge holding! They are coming in at 60-62 Rc. These ultra-thin slicers are .090" thick with an edge thickness of approximately .010" prior to sharpening!!!! That's about 3 sheets of paper thick prior to sharpening!!! Yowza!!!"
Original Sales Thread : https://www.bladeforums.com/threads...nesday-june-2-2021-at-9-00pm-eastern.1792398/
Specifications:
Overall Length : 8.5”
Blade Length : approx. 4”
Blade Width (At Widest Part): 1 3/8"
Thickness: Approx. .090"
Steel: Elmax
Finish: Hand Applied Satin
Bevel: Flat Saber
Hardness: 60-62 Rc
Busse Combat Regular Retail Price: $350 + $14.95 Shipping = $364.95
Father & Son's Re-Profiled Edge : $30
Total Retail Value: $394.95 ------- YOU SAVE $109.95!
Asking $285 Shipped TYD via Paypal or USPS Money Order
------------------------------------------------------------------------------------------------------------------------
Busse Custom Shop - Custom Elmax Slicer Variant
- Hand-Applied Satin Finish
- Hand-Smoothed Black G-10 w/ Wood Inlays
- Mosaic Pins
BRAND NEW!
Excerpt From Jerry Busse : https://www.bladeforums.com/threads...-sunday-4-18-2021-at-9-00-pm-eastern.1785728/
"SliceOganzaaaa!!!!
All blades are made from ELMAX steel and have undergone our extensive heat-treat protocol designed specifically for maximum edge holding! They are coming in at 60-62 Rc. These ultra-thin slicers are .090" thick with an edge thickness of approximately .010" prior to sharpening!!!! That's about 3 sheets of paper thick prior to sharpening!!! Yowza!!!"
Original Sales Thread : https://www.bladeforums.com/threads...nesday-june-2-2021-at-9-00pm-eastern.1792398/
Specifications:
Over All Length: Approx. 8 1/2"
Blade Length: Approx. 3.75"
Blade Width (At Widest Part): 1 3/8"
Thickness: Approx. .090"
Steel: Elmax
Finish: Hand Applied Satin
Bevel: Flat Saber
Hardness: 60-62 Rc
Busse Combat Regular Retail Price: $350 + $14.95 Shipping = $352.95
Father & Son's Re-Profiled Edge : $30
Total Retail Value: $394.95 ------- YOU SAVE $109.95!
Asking $285 Shipped TYD via Paypal or USPS Money Order
------------------------------------------------------------------------------------------------------------------------
All knives for sale by myself will include a free re-profiling and/or sharpening, if you do not need or want this then I will discount the total price of the knife by $20 on request via PM or email.
- Unless stated otherwise in the individual description of each specific knife listed, all knives are in factory new condition... though they are not necessarily in *perfect* for various reasons (I generally have not seen perfection in any knife)
- Knives which have already been used and/or been re-profiled by myself or others will always be described as such so please read the description of each knife carefully, most knives from my collection are going to be factory new condition.
- I will work with you via PM or email in order to select the proper edge geometry for what you intend to use the knife for, which will allow for the highest combination cutting ability and edge retention while still assuring sufficient strength of the edge.
- I do all sharpening work personally on my Tormek T-8 grinder, which uses a water trough to submerge and cool the grinding wheel in order to guarantee that there is no heat transfer to the edge in grinding and thereby zero chance of affecting heat treatment.
- I can generally do a convex or V-grind edge profile on most knives but some knives cannot be done without additional work using manual grinding on select waterstones, please contact me for the specified knife to enquire about which edge shape you prefer.
- My V-grind edges will have a VERY slight hollow shape to the edge but it is so close to being flat that it is virtually undetectable without carefully measuring and looking for it specifically, this means the edge will not be weak because of the slight hollow as some may fear.
Busse Combat - Trustee Warden
BRAND NEW
FREE EDGE REPROFILING AND/OR SHARPENING SERVICE INCLUDED + MONEY BACK GUARANTEE!
- Shark Edition Cerakote Finish
- G-10 Handle (Cannot Be Seen Under Cerakote)
Excerpt From Jerry Busse : https://www.bladeforums.com/threads...ednesday-july-27-2022-at-9pm-eastern.1883005/
Specifications:
OAL = Approx 7.625”
Blade Length: Approx. 3.4"
Thickness: Approx. .160"
Blade Steel: INFI
Hardness: 58-60 Rc
Bevel: Flat Saber
Busse Combat Regular Retail Price: $329.00 + $14.95 Shipping = $343.95
Father & Son's Re-Profiled Edge : $30
STANDARD RETAIL PRICING TOTAL: $373.95 ------ YOU SAVE $88.95!
Asking $285 Shipped TYD via Paypal or USPS Money Order
------------------------------------------------------------------------------------------------------------------------
Busse Combat - Trustee Warden
BRAND NEW
FREE EDGE REPROFILING AND/OR SHARPENING SERVICE INCLUDED + MONEY BACK GUARANTEE!
- Hand-Applied Satin Finish
- Green Canvas Micarta Handle
Excerpt From Jerry Busse : https://www.bladeforums.com/threads...g-sunday-3-20-2022-at-9-00pm-eastern.1863343/
Specifications:
OAL = Approx 7.625”
Blade Length: Approx. 3.4"
Thickness: Approx. .160"
Blade Steel: INFI
Hardness: 58-60 Rc
Bevel: Flat Saber
Busse Combat Regular Retail Price: $307.00 + $14.95 Shipping = $321.95
Father & Son's Re-Profiled Edge : $30
STANDARD RETAIL PRICING TOTAL: $351.95 -------- YOU SAVE 66.95!
Asking $285 Shipped TYD via Paypal or USPS Money Order
-----------------------------------------------------------------
Busse Combat - HOG Badger (Battle Grade)
LIKE NEW CONDITION - SOME LIGHT PATINA CAN BE SEEN ON FACTORY EDGE
FREE EDGE REPROFILING AND/OR SHARPENING SERVICE INCLUDED + MONEY BACK GUARANTEE!
- Desert Sage Powder Coating Finish
- Black Canvas Micarta Handle
Original Sales Thread : https://www.bladeforums.com/threads...ricing-coming-this-wednesday-11-1-17.1529914/
Specifications:
Blade Length: Approx. 5.9"
Over All Length: Approx. 10.9"
Thickness: Approx. 210"
Steel: SR-101
Hardness: 58-60 Rc
Grind: Flat Saber
Busse Combat Regular Retail Price: $237 + $14.95 Shipping = $251.95
Father & Son's Re-Profiled Edge : $30
Total Retail Value: $281.95
Asking $285 Shipped TYD via Paypal or USPS Money Order
------------------------------------------------------------------------------------------------------------------------
Busse Custom Shop - Elmax Slicer Variant
BRAND NEW
FREE EDGE REPROFILING AND/OR SHARPENING SERVICE INCLUDED + MONEY BACK GUARANTEE!
- Hand-Applied Satin Finish
- Stabilized Hardwood Wood Inlays w/ Red & Black G-10
Excerpt From Jerry Busse : https://www.bladeforums.com/threads...-sunday-4-18-2021-at-9-00-pm-eastern.1785728/
"SliceOganzaaaa!!!!
All blades are made from ELMAX steel and have undergone our extensive heat-treat protocol designed specifically for maximum edge holding! They are coming in at 60-62 Rc. These ultra-thin slicers are .090" thick with an edge thickness of approximately .010" prior to sharpening!!!! That's about 3 sheets of paper thick prior to sharpening!!! Yowza!!!"
Original Sales Thread : https://www.bladeforums.com/threads...nesday-june-2-2021-at-9-00pm-eastern.1792398/
Specifications:
Overall Length : 8.5”
Blade Length : approx. 4”
Blade Width (At Widest Part): 1 3/8"
Thickness: Approx. .090"
Steel: Elmax
Finish: Hand Applied Satin
Bevel: Flat Saber
Hardness: 60-62 Rc
Busse Combat Regular Retail Price: $350 + $14.95 Shipping = $364.95
Father & Son's Re-Profiled Edge : $30
Total Retail Value: $394.95 ------- YOU SAVE $109.95!
Asking $285 Shipped TYD via Paypal or USPS Money Order
------------------------------------------------------------------------------------------------------------------------
Busse Custom Shop - Custom Elmax Slicer Variant
- Hand-Applied Satin Finish
- Hand-Smoothed Black G-10 w/ Wood Inlays
- Mosaic Pins
BRAND NEW!
Excerpt From Jerry Busse : https://www.bladeforums.com/threads...-sunday-4-18-2021-at-9-00-pm-eastern.1785728/
"SliceOganzaaaa!!!!
All blades are made from ELMAX steel and have undergone our extensive heat-treat protocol designed specifically for maximum edge holding! They are coming in at 60-62 Rc. These ultra-thin slicers are .090" thick with an edge thickness of approximately .010" prior to sharpening!!!! That's about 3 sheets of paper thick prior to sharpening!!! Yowza!!!"
Original Sales Thread : https://www.bladeforums.com/threads...nesday-june-2-2021-at-9-00pm-eastern.1792398/
Specifications:
Over All Length: Approx. 8 1/2"
Blade Length: Approx. 3.75"
Blade Width (At Widest Part): 1 3/8"
Thickness: Approx. .090"
Steel: Elmax
Finish: Hand Applied Satin
Bevel: Flat Saber
Hardness: 60-62 Rc
Busse Combat Regular Retail Price: $350 + $14.95 Shipping = $352.95
Father & Son's Re-Profiled Edge : $30
Total Retail Value: $394.95 ------- YOU SAVE $109.95!
Asking $285 Shipped TYD via Paypal or USPS Money Order
------------------------------------------------------------------------------------------------------------------------