This baby here is a variation on my leuku pattern buschrafter blades. I put a more traditional blade shape on it, with a dropped edge sharp all the way back for those that like the rear corner cutting ability (It's really pretty useful).
15N20 steel, .095 thick with a differential temper and a thin convex taper grind.
OAL is 9.5 inches, blade length is 4.75 inches. breadth of blade is a full 1 7/16 inches.
Handle is sealed jatoba with a tung oil finish, 3/16 brass pins and a 1/4 (3/16 ID) lanyard tube.
Sheath is a mahogany dyed, water formed, expedition style. Fully adjustable carry, double needle hand stitched, the works.
Sold!
15N20 steel, .095 thick with a differential temper and a thin convex taper grind.
OAL is 9.5 inches, blade length is 4.75 inches. breadth of blade is a full 1 7/16 inches.
Handle is sealed jatoba with a tung oil finish, 3/16 brass pins and a 1/4 (3/16 ID) lanyard tube.
Sheath is a mahogany dyed, water formed, expedition style. Fully adjustable carry, double needle hand stitched, the works.
Sold!
Last edited:
