Igneous_Edged_Tools
KnifeMaker / Craftsman / Service Provider
- Joined
- Feb 16, 2017
- Messages
- 164
Hello everyone,
I have a very unique one-off for everyone today. This is a full tang tanto concept we’ve had for awhile that we finally decided to make. Antique train spring steel was used and pulled a very nice hamon close to the edge to maximize durability on the spine and sharpness retention on the edge. This blades edge geometry is the first to ever genuinely scare me with it’s sharpness.
Blade Features
Handle Material: Walnut
Blade Material: Differentially Heat Treated Antique Train Spring Steel [Over 100 years old laminated steel]
- Hand-Forged Blade With Minimal Stock Removal
- 400 Grit Hand Rubbed & Acid Washed Finish
-Brass Pin Stock
-Brute De Forged Flats
-Shavin Sharp
- Mainly flat grind with slight convex to support the edge
|OAL:14 1/4”|Blade:9 1/4”|Handle:4 ¾ (3 ½ Useable)”|Thickness:3/16" (with distal taper)|
-Holstex Sheath
Note on sheath: Our holstex sheath is essentially free as we do not consider it when pricing our knives. We included it to make shipping safer and provide a basic and very effective tech-lock compatible carry option for our users. We like to focus on what we are good at, bladesmithing, and leave sheath making up to another more skilled maker of your choosing.
Price: 375$ (Includes Free USPS Priority Shipping for CONUS & Covers any other transaction fees) [Offers are considered]
[International shipping costs an additional $20]
[Price listed here is special and may differ from our website pricing]
Please make sure the useable handle length is at least a little greater than the width of your palm before deciding to purchase.
If you are interested in purchasing or have any questions please feel free to contact me at igneousedgedtools@gmail.com . You can also send me a private message on here as well however I am sometimes not notified so if there is any delay in my response please send me an email. Thanks for looking!
I have a very unique one-off for everyone today. This is a full tang tanto concept we’ve had for awhile that we finally decided to make. Antique train spring steel was used and pulled a very nice hamon close to the edge to maximize durability on the spine and sharpness retention on the edge. This blades edge geometry is the first to ever genuinely scare me with it’s sharpness.
Blade Features
Handle Material: Walnut
Blade Material: Differentially Heat Treated Antique Train Spring Steel [Over 100 years old laminated steel]
- Hand-Forged Blade With Minimal Stock Removal
- 400 Grit Hand Rubbed & Acid Washed Finish
-Brass Pin Stock
-Brute De Forged Flats
-Shavin Sharp
- Mainly flat grind with slight convex to support the edge
|OAL:14 1/4”|Blade:9 1/4”|Handle:4 ¾ (3 ½ Useable)”|Thickness:3/16" (with distal taper)|
-Holstex Sheath
Note on sheath: Our holstex sheath is essentially free as we do not consider it when pricing our knives. We included it to make shipping safer and provide a basic and very effective tech-lock compatible carry option for our users. We like to focus on what we are good at, bladesmithing, and leave sheath making up to another more skilled maker of your choosing.
Price: 375$ (Includes Free USPS Priority Shipping for CONUS & Covers any other transaction fees) [Offers are considered]
[International shipping costs an additional $20]
[Price listed here is special and may differ from our website pricing]
Please make sure the useable handle length is at least a little greater than the width of your palm before deciding to purchase.
If you are interested in purchasing or have any questions please feel free to contact me at igneousedgedtools@gmail.com . You can also send me a private message on here as well however I am sometimes not notified so if there is any delay in my response please send me an email. Thanks for looking!
Last edited: