CPE_Knives
Knifemaker / Craftsman / Service Provider
- Joined
- Oct 29, 2012
- Messages
- 1,699
Good Afternoon,
I've been working on this design for a while. I think I have found a good balance of shape and durability for a G10 point. This is made from 0.330 G10 which is a bit thicker than these types are normally made from. Being G10 its easy to adjust the edge or tip with some 220 grit sandpaper.
There are no metal parts in the sheath. I put the fold on the kydex at the bottom so the pointy end is not going to come through. I put a rubberized cord through the holes which provides a good retention for the kydex. The cord is currently setup with a couple belt loops but it can be changed to whatever you want or replaced with 550 cord. I left the rubber cords long so you can adjust them. I squared the sheath so it also works well in a front pocket.
The knife ways 1.47 ounces and its 2.5 ounces with the sheath and cord so you don't notice you are carrying it.
Let me know what you guys think. I was considering doing a couple of these in steel.
Price SOLD , shipping is included to continental United States via USPS. Preferred payment is via paypal.
Blade Steel: 0.330" G10
Grind: Flat
Blade: 2 3/4"
Handle Material: Integral G10
Overall Length: 4 3/4"
Sheath: Kydex
Weight: 1.47 ounces
If you would like additional pictures or have questions please contact me at cpeknives@gmail.com
Comments are welcome thank you for looking,
Paul
I've been working on this design for a while. I think I have found a good balance of shape and durability for a G10 point. This is made from 0.330 G10 which is a bit thicker than these types are normally made from. Being G10 its easy to adjust the edge or tip with some 220 grit sandpaper.
There are no metal parts in the sheath. I put the fold on the kydex at the bottom so the pointy end is not going to come through. I put a rubberized cord through the holes which provides a good retention for the kydex. The cord is currently setup with a couple belt loops but it can be changed to whatever you want or replaced with 550 cord. I left the rubber cords long so you can adjust them. I squared the sheath so it also works well in a front pocket.
The knife ways 1.47 ounces and its 2.5 ounces with the sheath and cord so you don't notice you are carrying it.
Let me know what you guys think. I was considering doing a couple of these in steel.
Price SOLD , shipping is included to continental United States via USPS. Preferred payment is via paypal.
Blade Steel: 0.330" G10
Grind: Flat
Blade: 2 3/4"
Handle Material: Integral G10
Overall Length: 4 3/4"
Sheath: Kydex
Weight: 1.47 ounces
If you would like additional pictures or have questions please contact me at cpeknives@gmail.com
Comments are welcome thank you for looking,
Paul
Last edited:
