Here's a first look at some of our Gen 1 Mk 4 IGHs that aren't quite done, but will be by tomorrow.
They all feature our Snakeskin Micarta Veneer skins over a Gen 1 Mk 4 composite handle.
Four of the IGHs are Fighter Variants - Note the abbreviated hammer polls - they are absolutely devastating in certain low and high quarter attacks especially - striking poll first, the combination of our Gen 1 Mk 4 handle geometry and the trailing bit makes this type of hawk track and turn at speeds and levels of control that must be experienced to be believed.
Left to Right (below);
Commanche Gen 1 Mk 4 Fighter - Length, 18.6 Inches. Weight, 19.8 Ounces.
Mamba Christian Gen 1 Mk 4 Fighter - Length, 19.4 Inches. Weight, 20.2 Ounces.
Short Multicam Gen 1 Mk 4 Fighter - Length, 19.5 Inches. Weight, 20.3 Ounces.
Long Multicam Gen 1 Mk 4 Fighter - Length, 24.5Inches. Weight, 21.5 Ounces.
I am going to put our Removable Airtight Plugs in the ends of the polycarbonate thru-tubes in each hawk, and wrap them with our Protective Paracord for Overstrike Protection.
Here you can see a detail of the hawks, which illustrates the Polycarbonate Tube that runs all the way through the handle, to be used as a fire bellows, a .50 Caliber blow gun, Survival Mini Kit Storage, etc.
Featured in this batch of IGHs is are also three Standard Gen 1 Mk 4 hawks, featuring unaltered bit-aligned Cold Steel Trail Hawk heads - I love these hawks because of their great balance coupled with the slightly grippy Snakeskin back and sides, and the smooth Snake Belly Strike Plates.
Like the other hawks featured here, they all feature the Gen 1 Mk 4 Compsite Handle we designed with an Endo/Exoskeletal Composite Handle.
Left to Right (below);
(Observe the Weight to Length Ratios! These hawks are strong and light.)
Long Multicam Gen 1 Mk 4 - Length, 24.6 Inches. Weight, 24.1 Ounces.
Short Multicam Gen 1 Mk 4 - Length, 19.5 Inches. Weight, 21.1 Ounces.
Long Multicam Gen 1 Mk 4 - Length, 24.4 Inches. Weight, 23.5 Ounces.
Tomorrow I am going to dude these hawks up, and put the IR-treatment on the Multicams;
The IGH Fighters will be $235 plus Tax and Shipping for first-time Investors. - $210 plus Tax and Shipping for Investors and Public Service and Military, as our small way of saying Thank You!!!
The Standard Multicam IGHs will be $225 plus Tax and Shipping for first-time Investors. - $200 plus Tax and Shipping for Investors and Public Service and Military, cuz like I said, you RAWK, thought ya should know.
Interested? Questions?
Kindly contact my Erica immediately at:
ericag@equinoxcoronado.com
Erica will organize payment for ya, if you choose to get one.
These hawks will go quickly, if they follow the pattern.
All our stuff is covered by our Unconditional Lifetime Guarantee we call the Happiness Guarantee.
Nothing goes out the door that I would not rely on with my life. 'Nuff Said, i reckon.
More pictures and information shortly, of the finished hawks that haven't sold.
Thanks for your consideration, brethren.
vec
They all feature our Snakeskin Micarta Veneer skins over a Gen 1 Mk 4 composite handle.
Four of the IGHs are Fighter Variants - Note the abbreviated hammer polls - they are absolutely devastating in certain low and high quarter attacks especially - striking poll first, the combination of our Gen 1 Mk 4 handle geometry and the trailing bit makes this type of hawk track and turn at speeds and levels of control that must be experienced to be believed.
Left to Right (below);
Commanche Gen 1 Mk 4 Fighter - Length, 18.6 Inches. Weight, 19.8 Ounces.
Mamba Christian Gen 1 Mk 4 Fighter - Length, 19.4 Inches. Weight, 20.2 Ounces.
Short Multicam Gen 1 Mk 4 Fighter - Length, 19.5 Inches. Weight, 20.3 Ounces.
Long Multicam Gen 1 Mk 4 Fighter - Length, 24.5Inches. Weight, 21.5 Ounces.
I am going to put our Removable Airtight Plugs in the ends of the polycarbonate thru-tubes in each hawk, and wrap them with our Protective Paracord for Overstrike Protection.
Here you can see a detail of the hawks, which illustrates the Polycarbonate Tube that runs all the way through the handle, to be used as a fire bellows, a .50 Caliber blow gun, Survival Mini Kit Storage, etc.
Featured in this batch of IGHs is are also three Standard Gen 1 Mk 4 hawks, featuring unaltered bit-aligned Cold Steel Trail Hawk heads - I love these hawks because of their great balance coupled with the slightly grippy Snakeskin back and sides, and the smooth Snake Belly Strike Plates.
Like the other hawks featured here, they all feature the Gen 1 Mk 4 Compsite Handle we designed with an Endo/Exoskeletal Composite Handle.
Left to Right (below);
(Observe the Weight to Length Ratios! These hawks are strong and light.)
Long Multicam Gen 1 Mk 4 - Length, 24.6 Inches. Weight, 24.1 Ounces.
Short Multicam Gen 1 Mk 4 - Length, 19.5 Inches. Weight, 21.1 Ounces.
Long Multicam Gen 1 Mk 4 - Length, 24.4 Inches. Weight, 23.5 Ounces.
Tomorrow I am going to dude these hawks up, and put the IR-treatment on the Multicams;
The IGH Fighters will be $235 plus Tax and Shipping for first-time Investors. - $210 plus Tax and Shipping for Investors and Public Service and Military, as our small way of saying Thank You!!!
The Standard Multicam IGHs will be $225 plus Tax and Shipping for first-time Investors. - $200 plus Tax and Shipping for Investors and Public Service and Military, cuz like I said, you RAWK, thought ya should know.
Interested? Questions?
Kindly contact my Erica immediately at:
ericag@equinoxcoronado.com
Erica will organize payment for ya, if you choose to get one.
These hawks will go quickly, if they follow the pattern.
All our stuff is covered by our Unconditional Lifetime Guarantee we call the Happiness Guarantee.
Nothing goes out the door that I would not rely on with my life. 'Nuff Said, i reckon.
More pictures and information shortly, of the finished hawks that haven't sold.
Thanks for your consideration, brethren.
vec
Last edited:
:thumbup: