PLackey
Knifemaker / Craftsman / Service Provider
- Joined
- Apr 1, 2010
- Messages
- 469
A beauty of a knife for the Gentleman or Lady. If you haven't tried a combo grind, It slices like a dream.
$260 + 12 CONUS shipping
click here to view / order
grind: scandi, combo grind
blade length: 3 1/2″
overall length: 8″
steel: .1″ 8670 @ 60 Hc
handle: stabilized, dyed, maple burl from Gulf Coast Blanks with Black and white G10 liners
handle thickness: 3/5
hardware: vintage paper triple pins and black canvas tube
sheath: JRE M sheath
I began making PL knives in 2016. I've done leather work for over 20. I added kydex to my repertoire in the last 3 years. The heat treat on all of my carbon steel knives is done by me in a thermostatically controlled Evenheat knifemaking kiln. Each 8670 blade is heated to austenitic temperature and quenched in Parks 50 oil. Then it goes through a 2 stage tempering process. Hardness is 60-61 hrc and my heat treat process produces a blade with extreme toughness and fine edge sharpenablility. Scales are glued with West Systems G-flex epoxy. My aim is to produce heirloom quality tools with excellent craftsmanship that will provide a lifetime of enjoyment and service.
$260 + 12 CONUS shipping
click here to view / order
grind: scandi, combo grind
blade length: 3 1/2″
overall length: 8″
steel: .1″ 8670 @ 60 Hc
handle: stabilized, dyed, maple burl from Gulf Coast Blanks with Black and white G10 liners
handle thickness: 3/5
hardware: vintage paper triple pins and black canvas tube
sheath: JRE M sheath
I began making PL knives in 2016. I've done leather work for over 20. I added kydex to my repertoire in the last 3 years. The heat treat on all of my carbon steel knives is done by me in a thermostatically controlled Evenheat knifemaking kiln. Each 8670 blade is heated to austenitic temperature and quenched in Parks 50 oil. Then it goes through a 2 stage tempering process. Hardness is 60-61 hrc and my heat treat process produces a blade with extreme toughness and fine edge sharpenablility. Scales are glued with West Systems G-flex epoxy. My aim is to produce heirloom quality tools with excellent craftsmanship that will provide a lifetime of enjoyment and service.