GiantMouse Nazca and Urban EDC F5.5 custom

agentblue

agentblue

Gold Member
Feedback: +7 / =0 / -0
Joined
Apr 5, 2012
Messages
117
This build started off as a standard GiantMouse Nazca with green Micarta scales. The scales were dyed teal while the hardware bronzed including the liners. The brass backspacer had a shipwrecked patina applied. To finish it off a matching lanyard was added. The action is smooth and the blade is centered. Was used to open a few packages so the blade retains the original sharp factory edge. Comes with original box and accessories.

Video available via link below.


$220 shipped via pp

Thanks for looking!
 

Attachments

  • IMG_4931.jpeg
    IMG_4931.jpeg
    376 KB · Views: 4
  • IMG_6499.jpeg
    IMG_6499.jpeg
    209.1 KB · Views: 4
  • IMG_4943.jpeg
    IMG_4943.jpeg
    433.9 KB · Views: 5
  • IMG_4940.jpeg
    IMG_4940.jpeg
    353.9 KB · Views: 5
  • IMG_4939.jpeg
    IMG_4939.jpeg
    380.5 KB · Views: 7
  • IMG_4938.jpeg
    IMG_4938.jpeg
    638.4 KB · Views: 4
  • IMG_4937.jpeg
    IMG_4937.jpeg
    506.1 KB · Views: 6
  • IMG_4934.jpeg
    IMG_4934.jpeg
    415.4 KB · Views: 3
  • IMG_4933.jpeg
    IMG_4933.jpeg
    382.2 KB · Views: 2
Last edited:
This F5.5 Micarta had the scales dyed deep ocean blue with bronzed hardware and a matching lanyard. Blade has never cut anything so the edge is factory. There is a slight scratch on one of the scales, but it’s not really noticeable unless you put it up to a light. Otherwise comes with original box and accessories. $220 shipped via pp or Venmo.

Video available below:
 

Attachments

  • IMG_6358.jpeg
    IMG_6358.jpeg
    218.1 KB · Views: 6
  • IMG_6359.jpeg
    IMG_6359.jpeg
    190.9 KB · Views: 8
  • IMG_6357.jpeg
    IMG_6357.jpeg
    241.7 KB · Views: 6
  • IMG_6356.jpeg
    IMG_6356.jpeg
    257.3 KB · Views: 7
  • IMG_6355.png
    IMG_6355.png
    665.1 KB · Views: 7
  • IMG_6353.png
    IMG_6353.png
    895 KB · Views: 7
  • IMG_6354.png
    IMG_6354.png
    951.7 KB · Views: 5
  • IMG_6352.png
    IMG_6352.png
    898.8 KB · Views: 6
Hey guys,

Started with the Urban EDC exclusive EMP Relative with Seigaiha pattern. A hybrid polish was applied to the scale pattern then to the edges. Scales were then ano’d in a blurple while the pocket clip, backspacer and screws in a light blue to complement. The pivot and remaining screws were ano’d in bronze for contrast and a custom matching lanyard to complete the build! This knife is like new and was never used. Video below.


$OLD!
 

Attachments

  • IMG_6296.jpeg
    IMG_6296.jpeg
    346 KB · Views: 4
  • IMG_6297.jpeg
    IMG_6297.jpeg
    369.5 KB · Views: 4
  • IMG_6299.jpeg
    IMG_6299.jpeg
    388 KB · Views: 2
  • IMG_6301.jpeg
    IMG_6301.jpeg
    456.3 KB · Views: 5
Last edited:
agentblue said:
This build started off as a standard GiantMouse Nazca with green Micarta scales. The scales were dyed teal while the hardware bronzed including the liners. The brass backspacer had a shipwrecked patina applied. To finish it off a matching lanyard was added. The action is smooth and the blade is centered. Was used to open a few packages so the blade retains the original sharp factory edge. Comes with original box and accessories.

Video available via link below.


$220 shipped via pp

Thanks for looking!
Click to expand...
Bump!
 
You must log in or register to reply here.
Back
Top