Ryan Thompson
Platinum Member
- Joined
- Oct 27, 2016
- Messages
- 742
Isley and Drew knives have been used and sharpened. Kornalski is still new, minus a couple of kydex scuffs.
GL Drew - $200
Forged from 52100 high carbon steel
Heat treated to Rc 58-60 with attention to a fine grain structure
Flat grind finished to 400 grit followed by a cork belt
Black canvas Micarta handle finished to 36 grit for grip. I cleaned the handle to show the pattern but it will darken with use.
The handle is sculpted to a coke bottle patter for a comfortable grip with a hatchet style butt
Distal tapered full tang
Overall length: 13 inches
Blade: 7 3/4 inches, 1/4 inch at the index finer tapering to the tip and butt
Slight recurve to the blade
Weight: 15 ounces
Leather scabbard with a belt loop for a right hand carry
Purchased here: https://www.bladeforums.com/threads/camper-chopper-sold.2005433/
Jason Isley - $175
7.5" blade
This is the wider variation of the M32 fillet.
14C28N Swedish Steel
Moderately flexible
Forest green G10 scales with orange liners
Brass Fixtures
Black Kydex sheath
Purchased on maker’s website
Adam Kornalski - $175
3V CPM 4,56 mm thick Fighter Agor165 in Black/Orange Tiger G10 with sheath
Blade: 3V CPM Steel 4.36 mm, 59 HRC HT for max. wear resistance )HT from 1080C and tempered in 540C 3xtimes
Coating / blade finish: Stonewashed
Handle: Black/Orange Tiger G10 with sheath, Stainless Torx security screws
Sheath: 2 mm ABS with BigTekLok
Weight: 250 g
Total length: 305 mm
Blade length: 165 mm (6,5")
Blade width: 33 mm (~1,3")
Purchased here: https://www.bladeforums.com/threads...n-black-orange-tiger-g10-with-sheath.2029050/
PPFF payment
GL Drew - $200
Forged from 52100 high carbon steel
Heat treated to Rc 58-60 with attention to a fine grain structure
Flat grind finished to 400 grit followed by a cork belt
Black canvas Micarta handle finished to 36 grit for grip. I cleaned the handle to show the pattern but it will darken with use.
The handle is sculpted to a coke bottle patter for a comfortable grip with a hatchet style butt
Distal tapered full tang
Overall length: 13 inches
Blade: 7 3/4 inches, 1/4 inch at the index finer tapering to the tip and butt
Slight recurve to the blade
Weight: 15 ounces
Leather scabbard with a belt loop for a right hand carry
Purchased here: https://www.bladeforums.com/threads/camper-chopper-sold.2005433/
Jason Isley - $175
7.5" blade
This is the wider variation of the M32 fillet.
14C28N Swedish Steel
Moderately flexible
Forest green G10 scales with orange liners
Brass Fixtures
Black Kydex sheath
Purchased on maker’s website
Adam Kornalski - $175
3V CPM 4,56 mm thick Fighter Agor165 in Black/Orange Tiger G10 with sheath
Blade: 3V CPM Steel 4.36 mm, 59 HRC HT for max. wear resistance )HT from 1080C and tempered in 540C 3xtimes
Coating / blade finish: Stonewashed
Handle: Black/Orange Tiger G10 with sheath, Stainless Torx security screws
Sheath: 2 mm ABS with BigTekLok
Weight: 250 g
Total length: 305 mm
Blade length: 165 mm (6,5")
Blade width: 33 mm (~1,3")
Purchased here: https://www.bladeforums.com/threads...n-black-orange-tiger-g10-with-sheath.2029050/
PPFF payment
Last edited: