- Joined
- Jan 18, 2017
- Messages
- 1,841
Up for sale are three Gossman Customs and three Lon Humphrey customs. Not selling because I want to, or need to, but because I "should." These are all amazing blades and I won't be upset if any of them stay with me!
Scott Gossman Custom Knives
From top:
1. 8" Big Boar Tusker in 4V with camo canvas micarta scales. Brand new, mint, never used, purchased directly from Scott's website. Beautiful drop point and finger choil. This is the only one quite like this I have seen... Scott uses 4V in competition cutting so you know it will perform like crazy! Comes with Gossman custom leather sheath.
Specifications
Overall Length: 13"
Blade Length: 8"
Choil Length: 1"
Cutting Edge: 7"
Blade Steel: CPM 4V
Blade Thickness: .265"
Blade Width: 1 7/8"
Constructed with stainless steel bolts and brass lanyard tubing.
TYD for $SOLD
2. Deer Creek in M4 with camo canvas micarta scales. I am not the original owner of this blade, but it was sold to me as new/unused and I have not used it. It does have some very light scratches near the edge in one small area on one side that makes me wonder if it was passed lightly over a strop for a stroke or two. These scratches are light and hard to capture on my camera, but you can barely see them if you zoom in and look just above halfway up the blade. Otherwise it's in perfect condition. Awesome model for all-around bushcraft/camping/hunting use in a steel that holds an edge certainly better than most, perhaps all others. Comes with Gossman custom leather sheath.
Specifications
Overall Length: 9.5"
Blade Length: 4.75"
Cutting Edge: 4.5"
Blade Steel: CPM M4
Blade Thickness: 3/16"
Blade Width: 1 1/2"
Constructed with stainless steel bolts and brass lanyard tubing.
TYD for $SOLD
3. 5" Big Boar Tusker in A2 with black canvas micarta scales. I am not the original owner of this blade. It was sold to me as new/unused, but I have used it lightly to do some de-limbing and carving. Still in at least 95% condition. Has some very light scratches on the bevels, but they are too light to capture on my camera, especially as the satin finish camouflages them so well. Edge is still in perfect condition. This always makes me think of what the "ultimate" Becker BK2 would be. Another great "one knife" all-arounder for bushcraft/camping/hunting use with an emphasis on hard use tasks with an excellent drop point. Chops like crazy for a 5" blade. Comes with Gossman custom leather sheath.
Specifications
Overall Length: 10.25"
Blade Length: 5.5"
Cutting Edge: 5.25"
Blade Steel: A2
Blade Thickness: 0.25"
Blade Width: 1 7/8"
Constructed with stainless steel bolts and brass lanyard tubing.
TYD for WITHDRAWN
Lon Humphrey Custom Brut de Forge Knives
From top:
1. Bridger in 52100 steel with Lon's signature Dark Curly Maple scales and nice orange liners that compliment the maple very well. Brand new, unused. I am not the original owner but it's clear that it's in unused condition upon examination. Very nice companion/belt knife in a great steel and with very comfortable handle. The finger choil makes this very usable for finer tasks, but the construction and Lon's craftsmanship means that you can beat on it without concern about whether it'll hold up (because it will.
) Comes with a very cool sheath I got from DLT Trading.
Specifications
Overall Length: 10.625"
Blade Length: 5.5"
Cutting Edge: 4.625"
Blade Steel: 52100
Blade Thickness: 0.185"
Weight: 9.5oz.
TYD for $SOLD
2. Reaver in Lon's famous 1095 steel with unbelievable Buckeye Burl scales with white liners. These are so nice that I had to include some extra close-ups of them--honestly my personal favorite wood that I have ever seen on a knife. Brand new as received from Knives Ship Free. Comes with stock KSF sheath. Just a killer blade--the nicest I have ever seen from Lon. Super ergonomic, big and beastly, but light and nimble. I anticipate I'll have some separation anxiety if she sells, lol.
Specifications
Overall Length: 16.25"
Blade Length: 10"
Cutting Edge: 9.25"
Blade Steel: 1095
Blade Thickness: 0.25"
Weight: 1lb. 5oz.
TYD for TRADED
3. Scandi-ground Kephart in 3V steel with awesome desert ironwood scales and orange liners. I don't think I have ever seen another maker forge 3V, but that's the kind of dedication Lon brings to his work. Brand new, unused, as purchased from DLT Trading. Comes with Lon Humphrey leather sheath. I think that Lon's brut de forge finishing really shines with this scandi. Very cool-looking forge marks on here.
Specifications
Overall Length: 9"
Blade Length: 4.5"
Blade Steel: CPM 3V
Blade Thickness: 0.19"
Weight: 8 oz.
TYD for $SOLD
Terms and conditions: Please post an "I'll take it" message to the thread, followed with a Private Message. If you don't have PM privileges, please post your e-mail address in the thread (and you may delete your e-mail after I respond.) Please don't post an "I'll take it" unless you unequivocally agree to the terms of sale noted in this post. Prices listed are the cost to your door via PayPal, fees and USPS Priority shipping paid by me IF SENDING TO A US 48 STATES ADDRESS--INTERNATIONAL SHIPPING ADDRESSES AND PAYPAL ACCOUNTS PLEASE SEE DETAILS BELOW! I will pay for signature delivery at your request. Extra insurance also available if you cover the charges. PayPal preferred, Money orders considered. Full payment preferred, but full or partial trade offers may be considered. I RESERVE THE RIGHT TO DENY SALE FOR ANY REASON.
International buyers: Add 5% to listed prices. The costs of shipping + insurance will also be your full responsibility. Buyer beware--If customs seizes your package, if it gets lost in the mail, etc., I will not be held liable for your loss beyond the recovered amount as dictated by insurance. Know your local laws.
Thank you for looking!
Scott Gossman Custom Knives
From top:
1. 8" Big Boar Tusker in 4V with camo canvas micarta scales. Brand new, mint, never used, purchased directly from Scott's website. Beautiful drop point and finger choil. This is the only one quite like this I have seen... Scott uses 4V in competition cutting so you know it will perform like crazy! Comes with Gossman custom leather sheath.
Specifications
Overall Length: 13"
Blade Length: 8"
Choil Length: 1"
Cutting Edge: 7"
Blade Steel: CPM 4V
Blade Thickness: .265"
Blade Width: 1 7/8"
Constructed with stainless steel bolts and brass lanyard tubing.
TYD for $SOLD
2. Deer Creek in M4 with camo canvas micarta scales. I am not the original owner of this blade, but it was sold to me as new/unused and I have not used it. It does have some very light scratches near the edge in one small area on one side that makes me wonder if it was passed lightly over a strop for a stroke or two. These scratches are light and hard to capture on my camera, but you can barely see them if you zoom in and look just above halfway up the blade. Otherwise it's in perfect condition. Awesome model for all-around bushcraft/camping/hunting use in a steel that holds an edge certainly better than most, perhaps all others. Comes with Gossman custom leather sheath.
Specifications
Overall Length: 9.5"
Blade Length: 4.75"
Cutting Edge: 4.5"
Blade Steel: CPM M4
Blade Thickness: 3/16"
Blade Width: 1 1/2"
Constructed with stainless steel bolts and brass lanyard tubing.
TYD for $SOLD
3. 5" Big Boar Tusker in A2 with black canvas micarta scales. I am not the original owner of this blade. It was sold to me as new/unused, but I have used it lightly to do some de-limbing and carving. Still in at least 95% condition. Has some very light scratches on the bevels, but they are too light to capture on my camera, especially as the satin finish camouflages them so well. Edge is still in perfect condition. This always makes me think of what the "ultimate" Becker BK2 would be. Another great "one knife" all-arounder for bushcraft/camping/hunting use with an emphasis on hard use tasks with an excellent drop point. Chops like crazy for a 5" blade. Comes with Gossman custom leather sheath.
Specifications
Overall Length: 10.25"
Blade Length: 5.5"
Cutting Edge: 5.25"
Blade Steel: A2
Blade Thickness: 0.25"
Blade Width: 1 7/8"
Constructed with stainless steel bolts and brass lanyard tubing.
TYD for WITHDRAWN
Lon Humphrey Custom Brut de Forge Knives
From top:
1. Bridger in 52100 steel with Lon's signature Dark Curly Maple scales and nice orange liners that compliment the maple very well. Brand new, unused. I am not the original owner but it's clear that it's in unused condition upon examination. Very nice companion/belt knife in a great steel and with very comfortable handle. The finger choil makes this very usable for finer tasks, but the construction and Lon's craftsmanship means that you can beat on it without concern about whether it'll hold up (because it will.
) Comes with a very cool sheath I got from DLT Trading.Specifications
Overall Length: 10.625"
Blade Length: 5.5"
Cutting Edge: 4.625"
Blade Steel: 52100
Blade Thickness: 0.185"
Weight: 9.5oz.
TYD for $SOLD
2. Reaver in Lon's famous 1095 steel with unbelievable Buckeye Burl scales with white liners. These are so nice that I had to include some extra close-ups of them--honestly my personal favorite wood that I have ever seen on a knife. Brand new as received from Knives Ship Free. Comes with stock KSF sheath. Just a killer blade--the nicest I have ever seen from Lon. Super ergonomic, big and beastly, but light and nimble. I anticipate I'll have some separation anxiety if she sells, lol.
Specifications
Overall Length: 16.25"
Blade Length: 10"
Cutting Edge: 9.25"
Blade Steel: 1095
Blade Thickness: 0.25"
Weight: 1lb. 5oz.
TYD for TRADED
3. Scandi-ground Kephart in 3V steel with awesome desert ironwood scales and orange liners. I don't think I have ever seen another maker forge 3V, but that's the kind of dedication Lon brings to his work. Brand new, unused, as purchased from DLT Trading. Comes with Lon Humphrey leather sheath. I think that Lon's brut de forge finishing really shines with this scandi. Very cool-looking forge marks on here.
Specifications
Overall Length: 9"
Blade Length: 4.5"
Blade Steel: CPM 3V
Blade Thickness: 0.19"
Weight: 8 oz.
TYD for $SOLD
Terms and conditions: Please post an "I'll take it" message to the thread, followed with a Private Message. If you don't have PM privileges, please post your e-mail address in the thread (and you may delete your e-mail after I respond.) Please don't post an "I'll take it" unless you unequivocally agree to the terms of sale noted in this post. Prices listed are the cost to your door via PayPal, fees and USPS Priority shipping paid by me IF SENDING TO A US 48 STATES ADDRESS--INTERNATIONAL SHIPPING ADDRESSES AND PAYPAL ACCOUNTS PLEASE SEE DETAILS BELOW! I will pay for signature delivery at your request. Extra insurance also available if you cover the charges. PayPal preferred, Money orders considered. Full payment preferred, but full or partial trade offers may be considered. I RESERVE THE RIGHT TO DENY SALE FOR ANY REASON.
International buyers: Add 5% to listed prices. The costs of shipping + insurance will also be your full responsibility. Buyer beware--If customs seizes your package, if it gets lost in the mail, etc., I will not be held liable for your loss beyond the recovered amount as dictated by insurance. Know your local laws.
Thank you for looking!
Last edited: