PAYMENT – PP plus 3 percent ONLY (or gift)
SHIPPING – The following are my general shipping methods - they are subject to change / vary based upon discussions with individual buyers
In Canada - Canada Post Expedited service
To the USA - CP/USPS Expedited (Express international) 3-5 day service
INTERNATIONAL - will assessed on a case by case basis. Please PM me PRIOR TO claiming the knife in this thread
FASTER SHIPPING and INSURANCE ARE THE BUYER'S RESPONSIBILITY
I am not responsible for any customs fees, duties, or issues. I will discuss how u want the knife declared for customs purposes PRIOR to shipping it to you
Burchtree Bladeworks "Tanto" Flipper (one off) - $OLD
Mint, uncarried, 4" blade, 9.25" OAL, perfect grind, DEAD center, perfect lock up, IKBS, INSANE Flipping action (as fast if not faster then most autos)
Marlowe A2 - $OLD
Light carry, unused, 3 13/16" blade, 8 3/4" OAL, perfect grind, perfect lock up, blade ever so slightly to the lock side but I have not touched the screw, perfect lock up, typical Marlowe "thwack" when flicked open. Not sure of the finish on the flats - looks like directional "scratch pad" lol.
JWS F-5 flipper - $OLD
New and unused, 3 7/8" blade, ironwood scales, one small line on the Ti bolster on the lockside that i could not capture - it arrived this way for John. On washers, excellent detent, i don't need wrist to flip but you may initially (it is more of a "push button flipper" then and light switch)
SOLD
Rudy Lala/Korth First Born prototype A - $old NET TO ME
New and unused, 3.625" blade, 4.5mm thick, IKBS, 5mm thick blade, thick sculpted Ti frame, perfect lock up, one of the best flippers i have ever owned - bar none. Blade is dead centered all the way down with plenty of room on either side - don't know why the tip looks off best I can say is the grind is off slightly as this was the first proto (never noticed until i took the pic below)
David Mosier Spyro flipper one off - $old - NET TO ME
Quad bolstered linerlock with CF insets, New and unused, 3.75" blade, IKBS, perfect flipping action and lock up - come on its a Mosier
Demko AD-10 - $OLD USD - NET TO ME
Light carry, unused, 3.5" 154cm blade, black G10 scales, blade and scales in perfect shape, light scratches on the pocket clip, incredibly smooth for which a big a$$ knife. Triad lock system which basically makes this feel like a fixed blade.
Andre Van Heerden/Tashi Bharucha Righteous - $OLD - NET TO ME
New and unused, 4" N690 satin blade, sculpted CF scales, great detent, wicked IKBS flipper.
I reserve the right to sell to whom ever I choose, as well as to not deal with nor sell to individuals for any reason.
please post "i'll take it" here followed by either a PM or email to:
JD
jdm_666 AT rogers DOT c0m
cross forum posted so time-stamp on the thread / PM / or email will decide
SHIPPING – The following are my general shipping methods - they are subject to change / vary based upon discussions with individual buyers
In Canada - Canada Post Expedited service
To the USA - CP/USPS Expedited (Express international) 3-5 day service
INTERNATIONAL - will assessed on a case by case basis. Please PM me PRIOR TO claiming the knife in this thread
FASTER SHIPPING and INSURANCE ARE THE BUYER'S RESPONSIBILITY
I am not responsible for any customs fees, duties, or issues. I will discuss how u want the knife declared for customs purposes PRIOR to shipping it to you
Burchtree Bladeworks "Tanto" Flipper (one off) - $OLD
Mint, uncarried, 4" blade, 9.25" OAL, perfect grind, DEAD center, perfect lock up, IKBS, INSANE Flipping action (as fast if not faster then most autos)
Marlowe A2 - $OLD
Light carry, unused, 3 13/16" blade, 8 3/4" OAL, perfect grind, perfect lock up, blade ever so slightly to the lock side but I have not touched the screw, perfect lock up, typical Marlowe "thwack" when flicked open. Not sure of the finish on the flats - looks like directional "scratch pad" lol.
JWS F-5 flipper - $OLD
New and unused, 3 7/8" blade, ironwood scales, one small line on the Ti bolster on the lockside that i could not capture - it arrived this way for John. On washers, excellent detent, i don't need wrist to flip but you may initially (it is more of a "push button flipper" then and light switch)
SOLD
Rudy Lala/Korth First Born prototype A - $old NET TO ME
New and unused, 3.625" blade, 4.5mm thick, IKBS, 5mm thick blade, thick sculpted Ti frame, perfect lock up, one of the best flippers i have ever owned - bar none. Blade is dead centered all the way down with plenty of room on either side - don't know why the tip looks off best I can say is the grind is off slightly as this was the first proto (never noticed until i took the pic below)
David Mosier Spyro flipper one off - $old - NET TO ME
Quad bolstered linerlock with CF insets, New and unused, 3.75" blade, IKBS, perfect flipping action and lock up - come on its a Mosier
Demko AD-10 - $OLD USD - NET TO ME
Light carry, unused, 3.5" 154cm blade, black G10 scales, blade and scales in perfect shape, light scratches on the pocket clip, incredibly smooth for which a big a$$ knife. Triad lock system which basically makes this feel like a fixed blade.
Andre Van Heerden/Tashi Bharucha Righteous - $OLD - NET TO ME
New and unused, 4" N690 satin blade, sculpted CF scales, great detent, wicked IKBS flipper.
I reserve the right to sell to whom ever I choose, as well as to not deal with nor sell to individuals for any reason.
please post "i'll take it" here followed by either a PM or email to:
JD
jdm_666 AT rogers DOT c0m
cross forum posted so time-stamp on the thread / PM / or email will decide
Last edited:
