Handle diameter

[tmix]

Would someone mind giving me the diameter of a CR shadow handle? Is it 1" or more?

Thanks for your help,

tmix

 

[westllen]

tmix...Hello! ...to your question,

The Shadow I (9"blade) and the Shadow IV(5.5" blade) are both 27mm or just over 1" in diameter.
the Shadow III (4" blade) is 25mm or exactly 1" in diameter.

This should answer your question.:thumbup:

best regards,

Jules

 

[tmix]

Thanks a million Westllen. My evil plan is nearing completion!

 

[westllen]

Thanks a million Westllen. My evil plan is nearing completion!

when your plan is complete ....post pic's!:thumbup:

good luck,

Jules

 

[tmix]

Can someone give me the handle ID, and possibly the thread pitch?

 

[westllen]

tmix, These mesurements are for the larger handle CRK one peice knives, not any of the 4" ones. If you need those ask me and I will be happy to measure those as well.

the cap thread OD dia. is 55/64" or .8594 dec. or 21,828mm.

the handle thread ID is 13/16" or.8125 dec. or 20,638mm.

this should assit you with your "evil plan" so to speak of!
Sounds....like some one is making a flashlight fixture or a ~Byrd spear pole~ like the ones affiliated with the Randall #18 or #14's.

I want to see some pic's of this evil creation of yours!

Good luck!

Jules

 

[tmix]

err, um something like that.

I was actually looking for a thread per inch count. If you happen to have that, that would be very helpful.

 

[westllen]

tmix, there's 12 lines of threads in the handle, 1" in lenth and 7 lines of thread on the cap 1/2" to 9/16" in lenth.

What are you making? and for what CRK knife?

Jules