- Joined
- Jul 8, 2007
- Messages
- 1,690
Made today, July 4th.
These drop point '704's' were made from two 12' Nicholson files, tempered down to 59-60rc., 9" long, 3/16" thick, 4 1/4" cutting edge, 4" handle (bottom one is Cocobolo Dymondwood, the other is Rasberry Dymondwood), 360 Brass pins and guard, handles are 9/16" thick, They come w/ a 7-8oz. handstiched leather sheath. These were made to be sold as a matching set, however will be seperated Sunday nite 7/6 if they haven't found a good home.
$175 w/ 100% mbg.
I also took a total of 15 pics during every step of the process so you can see your knife being made from start to finish! Thanks for looking.
-Michael
Pair has been split, see post #4
These drop point '704's' were made from two 12' Nicholson files, tempered down to 59-60rc., 9" long, 3/16" thick, 4 1/4" cutting edge, 4" handle (bottom one is Cocobolo Dymondwood, the other is Rasberry Dymondwood), 360 Brass pins and guard, handles are 9/16" thick, They come w/ a 7-8oz. handstiched leather sheath. These were made to be sold as a matching set, however will be seperated Sunday nite 7/6 if they haven't found a good home.
$175 w/ 100% mbg.
I also took a total of 15 pics during every step of the process so you can see your knife being made from start to finish! Thanks for looking.
-Michael
Pair has been split, see post #4
Attachments
Last edited:
