Harpoon Hunter in 80CRV2 – Elk

[John Cahoon]

Hey there everybody! Here’s a new Harpoon Hunter up for your consideration.

Steel is 1/8” x 1 1/2” in 80CRV2 with professional HT at 60/61. Hand sanded to 600 grit for a satin finish. The edge was about .010” before sharpening, it balances on back of the bolsters.

Dimensions: 9” OAL, Tip to Scales 4 1/2”

The handle is Elk with blue G10 liners and brass pins. It’s finished to 1500 grit, buffed, oiled and waxed.



$165 to your US door, and of course your satisfaction is my only priority. Paypal, check or MO, and the price includes fees and free shipping in the US.

Thanks so much for looking and please feel free to ask anything here or via PM.

John Cahoon

 

[Jack O'Neill]

nicely done John , the pins looked peened , nice touch .

 

[Cwilliams563]

Awesome job John! That is a nice looking and beefy blade in your hand.

 

[jfk1110]

Great job..... Looks like a work horse...

 

[John Cahoon]

Hi Jack, Cwilliams and JFK, Thanks all for your kind compliments... Jack those aren't truly peened. Just before glue up I trim and chamfer the pins real tight, polish the chamfers to 600, then after install I punch holes in blue tape and sand as near flush as I can get without hitting the bark.