Heat treated Ti Chisel ground knives

[BladeMan]

Here is a bunch of chisel grind Titanium knives. They are all made from heat treated ATI425 Ti except of one, which is made from heat treated BT23 (a rare Russian alloy). The HT was done by @Mecha.
Screws and pivot barrels are made from 6AL4V. They all have handles with a palm swell and some have additional grooves in it.
Those knives keep an edge and sharpen like a regular steel knife.

Made a handful chisel grinds and for now, that's it. They work very well and got really really sharp.

The prices are without sheath!


===========================================================================================
#1 - Utility - Juma Ivory Snake handle with orange G10 liner
===========================================================================================

OAL: 8.6"
Blade: 4.3", .118 thick. ATI425
Handle: Juma Ivory Snake with orange G10 liner
Weight: 2.78 oz

Top edge is sharpened too.

$old

More Pics: Pic 2 | Pic 3 | Pic 4 | Pic 5 | Pic 6 | Pic 7 | Pic 8



===========================================================================================
#2 - Utility - Black canvas Micarta with orange G10 liner
===========================================================================================

OAL: 8.6"
Blade: 4.3", .118 thick. BT23
Handle: Black canvas Micarta with orange G10 liner. Micarta is grooved for better grip
Weight: 3.06 oz

$old

More Pics: Pic 2 | Pic 3 | Pic 4 | Pic 5 | Pic 6 | Pic 7 | Pic 8 | Pic 9 | Pic 10 | Pic 11



===========================================================================================
#3 - EDC - Black canvas Micarta/Blue Denim Micarta with white G10 spacer and liner
===========================================================================================

OAL: 6.5"
Blade: 3.15", .118 thick. ATI425
Handle: Black canvas Micarta/Blue Denim Micarta with white G10 spacer and liner
Weight: 1.51 oz

$old

More Pics: Pic 2 | Pic 3 | Pic 4 | Pic 5 | Pic 6



===========================================================================================
#4 - EDC - Black canvas Micarta with orange G10 liner
===========================================================================================

OAL: 6.5"
Blade: 3.15", .118 thick. ATI425
Handle: Black canvas Micarta with orange G10 liner. Micarta is grooved for better grip
Weight: 1.76 oz

Bevel has been taken to a very fine grit to show off the "hamon".
It's no real hamon you know from steel, but the lines running along the edge as you can see in the last two pics are coming from the heat treatment.

$old

More Pics: Pic 2 | Pic 3 | Pic 4 | Pic 5 | Pic 6 | Pic 7 | Pic 8 | Pic 9 | Pic 10

 

[BladeMan]

nothing

 

[betzner]

A great selection of chisel grinds, Raimund. Love the way the colors come out. If I didn't already have five of the titanium pieces, I would get that BT23 piece. I would recommend these to BF members, for anyone looking for a truly lightweight piece!

 

[Hard Knocks]

I will take this:

===========================================================================================
#4 - EDC - Black canvas Micarta with orange G10 liner
===========================================================================================

OAL: 6.5"
Blade: 3.15", .118 thick. ATI425
Handle: Black canvas Micarta with orange G10 liner. Micarta is grooved for better grip
Weight: 1.76 oz

Bevel has been taken to a very fine grit to show off the "hamon".
It's no real hamon you know from steel, but the lines running along the edge as you can see in the last two pics are coming from the heat treatment.

$300,- shipped

Follow up PM incoming.

 

[Gusbuster]

I’ll take #1, double edged with Juma.