Thinning the herd, too many irons in the fire right now
No trades, but I'll listen to reasonable offers
PayPal only
Prices are all in, I cover PayPal fees and shipping (US only, no international)
Know your local laws
Contact me any way you like, I'll go by the earliest time stamp
All sales are final
1) Hinderer XM-18 3.5 Working finish S35VN FDE Bowie $325>SOLD
Working finish textured Ti scale with bronze ano Ti hardware and PB washers. Has been carried and used, 1 light scratch on show side of blade, a few marks on lock side Ti and clip, edge is factory. Lockup and centering are excellent. Comes with original box and hardware. It does NOT come with a G10 scale but it does have the liner. Also, the previous owner loc-tited the original hardware so there's dried gunk on it.
https://www.dropbox.com/sc/9ppnyf3iql9v9bx/AAAx55IWKh94EKMn5_tVPihUa
2) Medford Micro Praetorian T with PVD handles & clip, Vulcan D2 blade and flamed hardware $400>$375>$350
This has been carried a little and very lightly used. It has not been sharpened, still has a sharp factory edge. AFAIK it has not been disassembled, but I'm not the original owner. Action is smooth, lockup is solid and the centering is spot on. Comes with original packaging and papers except the white cardboard box.
https://www.dropbox.com/sc/o2v20afglu1eyy0/AADevUK05Toz0gyk0kIvjjI_a
3) Medford Micro Praetorian T with tumbled Ti handles & clip and PVD drop point D2 blade $400>SOLD
This one is brand new, never been carried, used, sharpened, disassembled or anything else. Perfect centering and solid lockup. Comes with all original packaging and papers.
https://www.dropbox.com/sc/gfhmg31n6na7ilm/AACdAujXxnl357iBUVSGePk-a
4) Andre De Villiers Hummer S35VN blade with Ti & carbon fiber handle $350>$325>$300
This has been carried, used, sharpened and lightly modified. It has a “weathered” bronze finish Ti handle with shiny edges, frag pattern carbon fiber inserts, lockbar insert with integrated overtravel stop and a milled pocket clip. The blade is S35VN and has been blasted with satin near the edge to simulate a hamon. My mods were to sand out the hamon on the swedge, which isn’t completely done, and grind down part of the spine to make it less of a hump. I took about 1/8” off the spine at the biggest point and I was extremely careful not to overheat it. I dipped it in water very regularly and it was never too hot to touch to my cheek. These are around $625 new, I priced it low due to the mods, this will make a great user. This is a large, heavy knife, blade length is 4.12”, thickness is .180”, and it has a beefy full length backspacer with integrated lanyard hole. It rides on bearings and has a very robust flipping action that shakes your hand when it locks. Centering is excellent and lockup is solid at 40%ish. Comes with DigiCam ADV soft zipper case.
https://www.dropbox.com/s/84khwq609tok2am/Photo Jun 27, 14 25 30.jpg?dl=0
https://www.dropbox.com/s/j0wx5dol9htqrvd/Photo Jun 27, 14 25 46.jpg?dl=0
No trades, but I'll listen to reasonable offers
PayPal only
Prices are all in, I cover PayPal fees and shipping (US only, no international)
Know your local laws
Contact me any way you like, I'll go by the earliest time stamp
All sales are final
1) Hinderer XM-18 3.5 Working finish S35VN FDE Bowie $325>SOLD
Working finish textured Ti scale with bronze ano Ti hardware and PB washers. Has been carried and used, 1 light scratch on show side of blade, a few marks on lock side Ti and clip, edge is factory. Lockup and centering are excellent. Comes with original box and hardware. It does NOT come with a G10 scale but it does have the liner. Also, the previous owner loc-tited the original hardware so there's dried gunk on it.
https://www.dropbox.com/sc/9ppnyf3iql9v9bx/AAAx55IWKh94EKMn5_tVPihUa
2) Medford Micro Praetorian T with PVD handles & clip, Vulcan D2 blade and flamed hardware $400>$375>$350
This has been carried a little and very lightly used. It has not been sharpened, still has a sharp factory edge. AFAIK it has not been disassembled, but I'm not the original owner. Action is smooth, lockup is solid and the centering is spot on. Comes with original packaging and papers except the white cardboard box.
https://www.dropbox.com/sc/o2v20afglu1eyy0/AADevUK05Toz0gyk0kIvjjI_a
3) Medford Micro Praetorian T with tumbled Ti handles & clip and PVD drop point D2 blade $400>SOLD
This one is brand new, never been carried, used, sharpened, disassembled or anything else. Perfect centering and solid lockup. Comes with all original packaging and papers.
https://www.dropbox.com/sc/gfhmg31n6na7ilm/AACdAujXxnl357iBUVSGePk-a
4) Andre De Villiers Hummer S35VN blade with Ti & carbon fiber handle $350>$325>$300
This has been carried, used, sharpened and lightly modified. It has a “weathered” bronze finish Ti handle with shiny edges, frag pattern carbon fiber inserts, lockbar insert with integrated overtravel stop and a milled pocket clip. The blade is S35VN and has been blasted with satin near the edge to simulate a hamon. My mods were to sand out the hamon on the swedge, which isn’t completely done, and grind down part of the spine to make it less of a hump. I took about 1/8” off the spine at the biggest point and I was extremely careful not to overheat it. I dipped it in water very regularly and it was never too hot to touch to my cheek. These are around $625 new, I priced it low due to the mods, this will make a great user. This is a large, heavy knife, blade length is 4.12”, thickness is .180”, and it has a beefy full length backspacer with integrated lanyard hole. It rides on bearings and has a very robust flipping action that shakes your hand when it locks. Centering is excellent and lockup is solid at 40%ish. Comes with DigiCam ADV soft zipper case.
https://www.dropbox.com/s/84khwq609tok2am/Photo Jun 27, 14 25 30.jpg?dl=0
https://www.dropbox.com/s/j0wx5dol9htqrvd/Photo Jun 27, 14 25 46.jpg?dl=0
Last edited:
