Hi everyone,
I have several knives that need a new home
Prices are PP G&S shipped anywhere in the US or Canada. Not shipping anywhere else at this time. NO TRADES, please don't ask!
1. Hinderer XM-18 3.5" Spearpoint - Gen 4 in CPM 20CV - Carried and Used, but never abused in any way. Very well maintained! I just sharpened it to 20 degrees (each side) and cleaned it up. Blade is centered with no play that I can notice (Pivot is not loctited, so you can take it apart very easy!). It has Forest Green G10 scales and new teflon washers. It's very hard to catch the scratches on the blade, in pictures, but they're there. It comes with its original box!
PRICE is USD SOLD!
PICs:
2. Northarmknives Skaha2 - Carbon Fiber and S35VN - Carried a few weeks, used for very light work. I disassembled it once as I was currios to see what makes the action so incredible (and cleaned it, oiled with mineral oil). It doesn't really show signs of use on the blade or handle. However, it may need a strop, as I never sharpened it or stropped it. Full disclosure - The knife is missing about 1 mm from the tip! I'm not sure how it happened, as I never used it to pry or cut anything hard (just opened packages, tape, etc). My best guess is that it happened when I opened it close to something hard, but I can't remember doing that either.
PRICE USD SOLD
Specs:
Maximum closed dimensions L x W x H: 4.4" x 1.4" x 0.75" (11.2cm x 3.6cm x 1.9cm)
Total handle thickness (at thickest point): 0.640" (16.26mm)
Blade length (tip to handle): 3.3" (8.38cm)
Open length: 7.75" (19.7cm)
G10 Weight: 3.0 oz. (85 grams)
Carbon Fiber Weight: 2.7 oz. (77 grams)
Blade steel: S35VN
Blade thickness at spine: 0.1" (2.5mm)
Blade Grind: full flat ground
Cutting edge angle (inclusive): 30°
PICs:
3. Spyderco Caribbean - New/In box. Never used, never cut anything, in original box.
Price SOLD
A few rules:
Buyer must be over 18 years old. Buyer must be legally allowed to purchase and possess this item. Buyer assumes all responsibility of their local and federal laws.
Payment via PayPal Goods and Services or, if your Canadian and have good feedback, EMT (will deduct the PP fees). Listed price is TYD including PP and shipping fees to Canada!
Not interested in trades at the moment and, please, no low ball offers.
First "I'll take it" posted in the forum or by PM/Email (usually) gets it. Please message me for more pics or any other questions before saying that you’ll take it. I will reserve the right to sell to whomever I chose to!
I expect payment within 24 hours of being notified of my PayPal address.
Thanks for looking!
I have several knives that need a new home
Prices are PP G&S shipped anywhere in the US or Canada. Not shipping anywhere else at this time. NO TRADES, please don't ask!
1. Hinderer XM-18 3.5" Spearpoint - Gen 4 in CPM 20CV - Carried and Used, but never abused in any way. Very well maintained! I just sharpened it to 20 degrees (each side) and cleaned it up. Blade is centered with no play that I can notice (Pivot is not loctited, so you can take it apart very easy!). It has Forest Green G10 scales and new teflon washers. It's very hard to catch the scratches on the blade, in pictures, but they're there. It comes with its original box!
PRICE is USD SOLD!
PICs:
2. Northarmknives Skaha2 - Carbon Fiber and S35VN - Carried a few weeks, used for very light work. I disassembled it once as I was currios to see what makes the action so incredible (and cleaned it, oiled with mineral oil). It doesn't really show signs of use on the blade or handle. However, it may need a strop, as I never sharpened it or stropped it. Full disclosure - The knife is missing about 1 mm from the tip! I'm not sure how it happened, as I never used it to pry or cut anything hard (just opened packages, tape, etc). My best guess is that it happened when I opened it close to something hard, but I can't remember doing that either.
PRICE USD SOLD
Specs:
Maximum closed dimensions L x W x H: 4.4" x 1.4" x 0.75" (11.2cm x 3.6cm x 1.9cm)
Total handle thickness (at thickest point): 0.640" (16.26mm)
Blade length (tip to handle): 3.3" (8.38cm)
Open length: 7.75" (19.7cm)
G10 Weight: 3.0 oz. (85 grams)
Carbon Fiber Weight: 2.7 oz. (77 grams)
Blade steel: S35VN
Blade thickness at spine: 0.1" (2.5mm)
Blade Grind: full flat ground
Cutting edge angle (inclusive): 30°
PICs:
3. Spyderco Caribbean - New/In box. Never used, never cut anything, in original box.
Price SOLD
Specifications
- Blade Length: 3.70"
- Closed Length: 4.84"
- Overall Length: 8.54"
- Cutting Edge: 3.67"
- Blade Thickness: 0.141"
- Blade Material: LC200N Ultra-Corrosion-Resistant Steel
- Blade Style: Sheepfoot
- Blade Grind: Full-Flat
- Blade Finish: Satin
- Blade Edge: Plain
- Handle Material: G10
- Handle Color: Black and Yellow
- Locking Mechanism: Compression
- Pocket Clip: Titanium (Tip-Up, Left/Right Carry)
- Model Number: C217GPSF
A few rules:
Buyer must be over 18 years old. Buyer must be legally allowed to purchase and possess this item. Buyer assumes all responsibility of their local and federal laws.
Payment via PayPal Goods and Services or, if your Canadian and have good feedback, EMT (will deduct the PP fees). Listed price is TYD including PP and shipping fees to Canada!
Not interested in trades at the moment and, please, no low ball offers.
First "I'll take it" posted in the forum or by PM/Email (usually) gets it. Please message me for more pics or any other questions before saying that you’ll take it. I will reserve the right to sell to whomever I chose to!
I expect payment within 24 hours of being notified of my PayPal address.
Thanks for looking!
Last edited:
