- Joined
- Aug 3, 2016
- Messages
- 1,540
Let me preface this by saying i like lanyards/fobs on most of my knives. It makes it easier for me to remove fro the pocket. Anyway...... I've never owned a Microtech but seen some good pics from @TheFactor of the pocket clip with the built in lanyard tab. He was kind enough to answer my questions. Basically i attached a lanyard to the factory pocket clip but it does not work when i carry it in the factory sheath (but fine in the pocket.) So i wanted t coe up with something i could switch out for when i sheath carry. (not all that often) so here we go.......
with factory clip:
Finshed Tab (taken to 1200 grit)
Attached to knife:
I Had limited materials so i used a old Kershaw Blur pocket clip mainly because it was so wide. I chopped a piece off, drilled, heated and bent than formed with dremel and polished.
with factory clip:
Finshed Tab (taken to 1200 grit)
Attached to knife:
I Had limited materials so i used a old Kershaw Blur pocket clip mainly because it was so wide. I chopped a piece off, drilled, heated and bent than formed with dremel and polished.