- Joined
- Aug 4, 2013
- Messages
- 802
Was granted a 2nd shot at a cool knife that I've really wanted for a little while so despite liking these they have to go.
These prices are firm for the knives individually however I will discount $6 off if 2 are bought together, $12 If you buy all 3
I reserve the right to trade or sell to whomever I choose. That being said first "i will take it" gets it
Got this EX01 in a trade a few months ago as well and I've carried it a few times but only used to cut some paper and a single peice of cardboard. Sharp edge, perfect centering not any wear that I remember (will check when home), solid lockup, Smooth as butter and flies out easier than most knives I own. Great EDC knife. Does not come with box but will be packaged safely for shipping.
Going price of $113 STYD , lower 48, at buyers risk NY, at buyers expense and risk international.
Have a barely used and barely carried ZT 0562. Really like this knife and just got it off the exchange from another member. ZT really knocked it out of the park with this, it flips better than my XM-18 and having no choil on it makes it an actual 3.5" of usable cutting edge. This one has a great detent and a snappy flip. If you watch jim skelton you'll understand what I mean when I say it can be flipped easily push button or light switch. This knife was used by me to cut open and break down a box or two then I gave it a few quick swipes on the sharpmaker to even up the sharpness (bottom part of the blade where a choil would be on an XM-18 wasn't as evenly sharp) but other than that its pretty much new, centering however is a hair towards lock side (if you are patient and have 2 torx drivers for this I believe it can be adjusted out).
The box was taken down when it was shipped to me and is a little worn but it's there and i'll ship it with the knife and plenty of bubble wrap.
Going price of $145 STYD , lower 48, at buyers risk NY, at buyers expense and risk international.
what you see on the blade in the second pic is just goo from cutting tape that was on the cardboard box. I will clean this off and make sure the edge is clean before shipping the knife.
Also have a Used and could use some love ZT 0550. This knife was traded to me about 2 years ago and I EDC'd it for a few months. This was traded to me with an anodized lock side done by the original owner, however he tried to stonewash it and my guess is he used something with sharp edges or that was the wrong size for stonewashing because there are small micro surface holes in the face of the Ti lockside. This is completely aesthetic and does not affect performance. After receiving the knife I did however polish the scale because the anodizing looked horrible with the small holes showing however some areas of the knife still show the anodization. This small issue can be fixed by having the knife cerakoted or possibly bead or sand blasting the scale. If this doesn't sell then I will have one of those things done and may repost. The knife is sharp and smooth with perfect centering and I have never had any other issues with it. Going price of$97 $79 STYD if purchased before 3:45 PST , lower 48, at buyers risk NY, at buyers expense and risk international.
These prices are firm for the knives individually however I will discount $6 off if 2 are bought together, $12 If you buy all 3
I reserve the right to trade or sell to whomever I choose. That being said first "i will take it" gets it
Got this EX01 in a trade a few months ago as well and I've carried it a few times but only used to cut some paper and a single peice of cardboard. Sharp edge, perfect centering not any wear that I remember (will check when home), solid lockup, Smooth as butter and flies out easier than most knives I own. Great EDC knife. Does not come with box but will be packaged safely for shipping.
Going price of $113 STYD , lower 48, at buyers risk NY, at buyers expense and risk international.
Have a barely used and barely carried ZT 0562. Really like this knife and just got it off the exchange from another member. ZT really knocked it out of the park with this, it flips better than my XM-18 and having no choil on it makes it an actual 3.5" of usable cutting edge. This one has a great detent and a snappy flip. If you watch jim skelton you'll understand what I mean when I say it can be flipped easily push button or light switch. This knife was used by me to cut open and break down a box or two then I gave it a few quick swipes on the sharpmaker to even up the sharpness (bottom part of the blade where a choil would be on an XM-18 wasn't as evenly sharp) but other than that its pretty much new, centering however is a hair towards lock side (if you are patient and have 2 torx drivers for this I believe it can be adjusted out).
The box was taken down when it was shipped to me and is a little worn but it's there and i'll ship it with the knife and plenty of bubble wrap.
Going price of $145 STYD , lower 48, at buyers risk NY, at buyers expense and risk international.
what you see on the blade in the second pic is just goo from cutting tape that was on the cardboard box. I will clean this off and make sure the edge is clean before shipping the knife.
Also have a Used and could use some love ZT 0550. This knife was traded to me about 2 years ago and I EDC'd it for a few months. This was traded to me with an anodized lock side done by the original owner, however he tried to stonewash it and my guess is he used something with sharp edges or that was the wrong size for stonewashing because there are small micro surface holes in the face of the Ti lockside. This is completely aesthetic and does not affect performance. After receiving the knife I did however polish the scale because the anodizing looked horrible with the small holes showing however some areas of the knife still show the anodization. This small issue can be fixed by having the knife cerakoted or possibly bead or sand blasting the scale. If this doesn't sell then I will have one of those things done and may repost. The knife is sharp and smooth with perfect centering and I have never had any other issues with it. Going price of
Last edited:
