12 Knives for SALE today. I am not interested in trades at this time - Besides a full sized RMJ Shrike.
I WILL NEVER SEND PAYMENT REQUESTS VIA EMAIL. IF YOU RECEIVE A REQUEST FOR PAYMENT VIA EMAIL IT IS A SCAMMER.
Payment methods accepted are PayPal (F/F greatly appreciated, G/S accepted with price adjustment for taxes), Venmo, Zelle or USPS Money Order.
CONUS Shipping only - domestic prices are bad and international is much, much worse.
I will always try to mail within 48 hours of sale depending on work location Im at - usually less than 24 hours though.
These knives are all used, some barely and a few heavily. All knives are in excellent condition but may show scuffs, scratches, marks in coating, patina and evidence of sharpening. None of these knives have chips, rolls or edge damage - ALL of these knives will arrive sharp enough to shave arm hair (not just saying that either, they are all sharp).
Left to right from second pic. These pics are horrible, happy to send more to serious buyers. Folders will be listed in proper section.
SOLD Architect Knives 5.5 3V Steel. Im original owner. Very minimal use around the house. 5.5 inch blade, 5/32 stock, 3V steel, not sure if this was manufactured by TOP'S or White River - can't go wrong with either IMO. Ranger Green G10 scales and a black kydex sheath. Edge has been touched up on fine diamond plate. Perfect belt knife.
$150 F/F
$170 G/S
SOLD Siegle Farm Hand Bowie 5160 Steel. Heavy user in excellent condition. I picked this one up in a trade so I don't know much about its history the past few years. The finish looks like it was modified to me, maybe someone took a scotchbrite pad to it ?, no damage just a little darker in some spots. 10 inch blade, .1/4 stock, tapered tang, differential heat treatment, green canvas scales and makers kydex. This knife is very fast in hand, nimble and lightweight for its size. I am only selling this one because the handle is a little small for my ape hands.. If you have XL and up mitts don't buy this one - scales measure about 4.8 inches end to end. This is a mean knife, campsite or SHTF this one has you covered.
$250 F/F
$275 G/S
Esee 6 3D G10. 1095 steel, .170 stock, 6.5 inch blade, Black 3D G10 scales, Knife Connection black kydex sheath. This one has been used a little, edge touched up. The scuffs in coating look worse than they are. Great murdered out user.
$125 F/F > $120
$135 G/S > $130
SOLD Esee 6 Original Linen. 1095 steel, .170 stock, 6.5 inch blade, original run black linen scales with faint red/orange liners. This one will come in a brand new Spec Ops Combat Master sheath - has been fitted to hold the blade perfectly on left or right side ($75 bucks these days). Barely used, stropped and cut paper.
$125 F/F > $120
$135 G/S > $130
SOLD Wonn Blade "Choppa". 8670 steel, 6.4 inch blade tip to scale, .24 stock, natural canvas scales, mild steel pins, makers kydex with ambidextrous belt attachment. I am original owner of this one. This knife has been used for some wood splitting and it’s beyond capable. I did plan to convex this one and started to strop it on 600 grit wet/dry paper and a moose pad - hence the marking in the parkerized coating. This is a great knife and I will most likely be pulling it. Listing this one for far less than I paid.. until it’s pulled.
$340 F/F > $330
$365 G/S > $355
SOLD Spartan Blades Ronin Shinto Magnucut Steel. Second owner and Im the only one to use this knife. Very minimal use around the house and a little yard type work. Edge touched up and it SHARP and TOOTHY. 5.5 inch blade, .19 stock, double black canvas scales, black kydex with perfect fit. Scuffs in finish will wipe away with a little WD40. NO BOX
$250 F/F > $240
$275 G/S > $260
SOLD TOP's HOG 4.5 Second owner, mild user, edge touched up and its sharp. Plenty of scuffs in coating. 4.5 inch blade, .19 stock of flat grind 1095 with TOP's differential heat treatment. Black canvas scales. Perfect leather sheath is extremely well made, 3/8 fire steel scraped once.
$120 F/F
$130 G/S
SOLD Esee 4. 1095 steel, 3/16 stock, 4.5 inch blade, Green coating, Factory sheath, Orange G10 scales were dyed dark brown and now appear almost like natural canvas micarta. The original owner sharpened this one and left the secondary a little uneven - cuts like a razor so I left it alone. Great user for a great price.
$100 F/F
$110 G/S
SOLD Esee Izula 2. Acid wash finish, green canvas scales, factory sheath. Sharpened once and ready to go. These are useful and handy. 1095 steel, .15 stock, 2.62 cutting edge and a full sized handle.
$65 F/F
$75 G/S
SOLD Becker BK16. 1095 steel, 4.2 inch blade, 5/32 stock, aftermarket KaBar micarta scales and a custom Azewelke kydex sheath with PERFECT fit. Mild user with coating scuffs, edge touched up.
$120 F/F > $115
$130 G/S > $125
SOLD Buck and Bear Camp Kukri and Off Grid Knives Tracker combo. Both knives are D2 steel, both have seen a little use, both are built like a tank, both have kydex sheath. B/B has G10 scales, 6 inch blade and 5mm stock. The OGK has 4.5 inch blade, 5mm stock and micarta scales - that knife performs ! I've used it quite a bit and it’s good to go. Excellent heat treatment on the OGK.
Asking $100 F/F or $110 G/S for the pair.
* My memory isn’t what it used to be. I believe I priced these at, close or far less than I paid for these. If anyone who I’ve had prior transactions with wants to make an offer - fire away please.
THANK YOU BLADE FORUMS !
Last edited:
