Hunter

[jdm61]

I have a little stag hunter for sale for $180 including USPS Priority Mail, but, as I am completely computer illiterate, I cannot figure out how to reduce the size of the bad picture I took to below 100k. SOOOOO.....it is oe the "available" page of my website......sorry about that

 

[braillediver]

This one?

Mitch

 

[jdm61]

This one?

Mitch

That be the one in all its cheapo digital camera glory

 

[scottickes]

Joe,
Two get the photos down in size do the following:

• Open the photo with Microsoft Windows Picture Manager
• Right click the image and then select 'edit pictures' from the drop down window.
• Left click on 'Resize' from the new drop down menu.
• In the option for 'Percentage of original width x heighth' box, put in a percentage less than 100, such as 95. Don't click the 'OK' button until you have the 'New Size' at the bottom down to less than 800 x 600 pixels.

This will get the photo size down to within the allowable limits for Bladeforums rules. If it still has more than 100 kb, then slowly reduce it further until it is below 100 kb. It will then be small enough to post here.

 

[jdm61]

Joe,
Two get the photos down in size do the following:

• Open the photo with Microsoft Windows Picture Manager
• Right click the image and then select 'edit pictures' from the drop down window.
• Left click on 'Resize' from the new drop down menu.
• In the option for 'Percentage of original width x heighth' box, put in a percentage less than 100, such as 95. Don't click the 'OK' button until you have the 'New Size' at the bottom down to less than 800 x 600 pixels.

This will get the photo size down to within the allowable limits for Bladeforums rules. If it still has more than 100 kb, then slowly reduce it further until it is below 100 kb. It will then be small enough to post here.

I'm a Mac guy, Scott.

 

[scottickes]

I'm a Mac guy, Scott.

No wonder you're having problems.

 

[jdm61]

drop
Scott......there is a reason that I switched to a Mac from an MS runnin' PC

 

[ADD]

Great looking knife!

1) What are the dimensions?
2) Is that a take down?

Thanks! :thumbup:

 

[HomeBru]

I'm a Mac guy, Scott.

If you're using iPhoto, select the photo and choose "File" > "Export". You can then choose the file dimensions for export.

J-

 

[jdm61]

Great looking knife!

1) What are the dimensions?
2) Is that a take down?

Thanks! :thumbup:

The blade is 4 inches by 1/8 + thick. It is not a take down model. I haven't figured out the lathe well enoough to do that yet