Hi All,
Here are the latest offerings from Mongrel Knives. Made by hand by me in the Sunny state of Florida.
Both are made from 5/32 (.156) thick 154-CM and tempered to a Rockwell 60.
Specifications:
Drop Point Hunter with Micarta Scales
Length - 8.75 inches
Blade length from tip to scales is 4 inches
Scales are made from Brown Canvas Micarta
3 Brass pins are 3/16ths inch thick
Mirror finish on the hollow ground bevel (10 inch wheel), hair popping sharp and well balanced.
File work on the spine is the Vine and Thorns pattern
Price is $167.50 shipped to the lower 48 via USPS Priority Mail. If you want a custom Kydex sheath like this one add $25.00
http://www.ebay.com/itm/Kydex-sheat...E-KNIFE-/311082545289?ssPageName=STRK:MESE:IT
That is me on Ebay add $25.00. You just need to tell me if it is for right or left hand draw. If no sheath is requested then it will be shipped very carefully wrapped in paper and bubble wrap.
Specifications:
Penetrator Point Hunter with Rose Wood Scales
Length 8 and 5/8ths inches
Blade length from tip to scales is 4 1/8 inches
Scales are made from Bolivian Rosewood
3 Brass pins are 3/16ths inch thick
Mirror finish on the hollow ground bevel (10 inch wheel), hair popping sharp and well balanced.
File work on the spine is the Vine and Thorns pattern
Price is $157.50 shipped to the lower 48 via USPS Priority Mail.
If you want a custom Kydex sheath like this one add $25.00
http://www.ebay.com/itm/Kydex-sheat...E-KNIFE-/311082545289?ssPageName=STRK:MESE:IT
That is me on Ebay , You just need to tell me if it is for right or left hand draw. If no sheath is requested then it will be shipped very carefully wrapped in paper and bubble wrap.
Speaking of sheaths, all of mine are made from .080 inch Black Kydex and I make a lot of them. If you need a new sheath for your knife let me know and I will quote you a price. I like challenges and I dont charge more for them.
Thanks, Ken
Thanks for looking, Comments are always welcome. Ken
Here are the latest offerings from Mongrel Knives. Made by hand by me in the Sunny state of Florida.
Both are made from 5/32 (.156) thick 154-CM and tempered to a Rockwell 60.
Specifications:
Drop Point Hunter with Micarta Scales
Length - 8.75 inches
Blade length from tip to scales is 4 inches
Scales are made from Brown Canvas Micarta
3 Brass pins are 3/16ths inch thick
Mirror finish on the hollow ground bevel (10 inch wheel), hair popping sharp and well balanced.
File work on the spine is the Vine and Thorns pattern
Price is $167.50 shipped to the lower 48 via USPS Priority Mail. If you want a custom Kydex sheath like this one add $25.00
http://www.ebay.com/itm/Kydex-sheat...E-KNIFE-/311082545289?ssPageName=STRK:MESE:IT
That is me on Ebay add $25.00. You just need to tell me if it is for right or left hand draw. If no sheath is requested then it will be shipped very carefully wrapped in paper and bubble wrap.
Specifications:
Penetrator Point Hunter with Rose Wood Scales
Length 8 and 5/8ths inches
Blade length from tip to scales is 4 1/8 inches
Scales are made from Bolivian Rosewood
3 Brass pins are 3/16ths inch thick
Mirror finish on the hollow ground bevel (10 inch wheel), hair popping sharp and well balanced.
File work on the spine is the Vine and Thorns pattern
Price is $157.50 shipped to the lower 48 via USPS Priority Mail.
If you want a custom Kydex sheath like this one add $25.00
http://www.ebay.com/itm/Kydex-sheat...E-KNIFE-/311082545289?ssPageName=STRK:MESE:IT
That is me on Ebay , You just need to tell me if it is for right or left hand draw. If no sheath is requested then it will be shipped very carefully wrapped in paper and bubble wrap.
Speaking of sheaths, all of mine are made from .080 inch Black Kydex and I make a lot of them. If you need a new sheath for your knife let me know and I will quote you a price. I like challenges and I dont charge more for them.
Thanks, Ken
Thanks for looking, Comments are always welcome. Ken
Last edited: