hydraulic press build question

T

TxMoon

Joined
Jun 26, 2008
Messages
34
What size or how big of a hydraulic cylinder do I need to find.
I am around a lot of farm equipment is there anything I could use from that.
I have just about everything but the cylinder.. How much pressure does my pump need to put out? thanks a mil guys.. Jim Reeves
 
The size of the cylinder and the pressure of the pump depend on eachother and the tonnage you want out of it.
 
PARTS LISTING
SUPPLIER PART# DESCRIPTION COMMENTS
NORTHERN 1053-C161 BARNES 2 STAGE PUMP -11GPM
2010-C161 PRINCE STANDARD 4-WAY CONTROL VALVE
4051-C161 7 GALLONS HYDRAULIC OIL TANK MUST CLEAN THE INSIDE WELL
4022-C161 RETURN LINE FILTER
4010-C161 SUCTION STRAINER THIS GOES INTO THE TANK
FITTINGS AND HOSES YOU WILL NEED 3 HI- PRESSURE HOSES AND LOW PRESSURE HOSE FOR THE RETURN.
53606-C161 GLYCERIN FILLED GAUGE 0-3000PSI
SURPLUS CENTER 10-1485 ELECTRIC MOTOR I USE A 3 HP AT 3250 RPMS
09 4954 HYDRAULIC CYLINDER I USE A 4 1/2" BORE X 8" STROKE WITH THE PUMP AND MOTOR SHOULD BE GENERATE 24 TONS
If I had to do it again I would go with a 5" minimum cylinder and a H frame.
My site has pic's of the build.
 
You must log in or register to reply here.
Back
Top