I need quick help - Saltwater Knife - All Day Carry

[TUF]

TUF, an outfit named Tektite seems to be carrying some Tekna products.
I don't know what their exact relationship is to the original company.

Yes I saw that when I googled to see if anyone was advertising them. I didn't see the dive knife I was talking about on their page. I'm usually not a fan of blades like it but I bought several over the years on base and I think the most I ever gave was twenty seven or twenty eight dollars for one. I never broke one nor had one corrode. They took a decent edge and held it OK. I didn't use them all that much as I usually had another knife on me. But for those times when you just had shorts and a t-shirt on or maybe were doing PT you could clip one on your shorts or even to your underwear.

 

[Pete1977]

I have a tiny bit of input in that I also work at sea, a lot of guys re purpose cheap kitchen knives. Small santokus in a decent sheath are really popular, and are awfully close to a sheepsfoot profile. I like the choice you ultimately made, but one thing to think about in the future is that long fixed blades can be awkward to get out of the sheath at certain angles, so make sure you mount it in a location that allows you to draw it easily. (And with either arm! You're going for this thing if you got entangled in something most likely!) As you're a diver you probably have some idea of how to carry the thing already but I'd say put it vertical on your chest like a cave diver. If you're going to be wearing a PFD you may already have a lash tab there for it. I used to carry a pacific salt and a paring knife made by victorinox. The salt goes in my pocket and the victorinox goes in a locking sheath on my chest. After a recent embarassing incident I think I'll be carrying both but am more likely to use the paring knife... You might be surprised how thick of a line you can cut with a sharp, thin knife. And if it costs less than $20 you can replace the thing when it's dull. Not the sexiest thing in the world which breaks my heart as a knife guy but it's very tried and true.

+1 for the victorinox paring knife. i think the handles are a little thin but they are available at most commercial fishing supply places with aftermarket handles and sheaths for wearing on your oilskins. if you are in st pete, check out causeway blvd in tampa near seabreeze seafood- there is a commercial shrimper supply place (or was 10 years ago) that carry vic paring knives- they are sometimes marketed as "twine knives" or "net knives." have a safe trip...

 

[richstag]

Thanks guys for the words of wisdom. I'm really not experienced with this stuff and the thoughts help. I was worried the jumpmaster was too long. My brother said a fixed 5 inch long would be all we would need. I will check out the alternatives and still try different mounting options on the PFD's with the 550 chord. I will check it out before we go out. If it seems like it just won't be practical then I will make a quick run to local fishing shops.

Thanks for the input once again,

Kevin

 

[TUF]

Have a great trip! The best way to avoid an emergency is to try not to stand inline with any line that is under tension or anywhere the load could go if a line were to break. Sounds a lot easier than it is and sometimes not possible. Remember the old saying; Be alert! The world needs more lerts

 

[richstag]

Thanks for the well wishes TUF

Just got back in town and had a couple packages to pick up. A quick Iphone shot

Guys, these things are perfect! Super sharp which I expected, incredible FF, and the two lockbacks have no play in any way and they are super smooth and easy to open. I couldn't be happier.

I am packing them away for the trip but I will be sure to post up some pics for you all when I get back.

Thanks again,

Kevin

 

[KNaB]

I think you've done well with your choices.
I use knives edc for the same reason and have looked at these options.
The only thing I'd add is that I really appreciate a hawkbill or recurve for lines.
Tend to agree with Esav about the sheepsfoot but on a larger vessel in Gulf waters you don't get that much movement on the deck so a point isn't a big drama.
I will be interested in your thoughts on the Jumpmaster, it's an option I've looked long and hard at.
I use a fixed Spydie, think its called the Rocksalt, no serrations but cuts line like a demon and no rust.

I hated myself for not picking up a Rocksalt when the got discontinued, but was relieved when it was recently re-released in vg-10, as I don't see too much salt water here in the midwest. It's one hell of a knife, but unfortunately too often the functionality of Ed Shempp's designs aren't fully realized until one has had the opportunity to use them. I love my Shempp Rock. Enjoy your Rocksalt:thumbup:

 

[jbmonkey]

good choices on the h1. down the road, not for this trip, since you are covered.... but some of the titanium blades would be something to consider.

 

[richstag]

Well guys, just wanted to post a quick update.

At the beginning of the week I was transported to the ER in an ambulance and was there unable to move or open my eyes for a few days. So, I am home now. The doctors don't know what is wrong though they did a ton of tests...Anyhow, I won't be making the trip on Monday and I am extremely disappointed. I was able to get my GF to next day air my brother his folder and FB though. So he will be prepared and be carrying them.

I was really looking forward to the trip but stuff happens I guess. I will still get some pics up but they will not be mine. When my brother gets back I will post his comments on the knives in the field and post any of his pics.

Im going to go lay back down now. In a few weeks I hope to have some relayed feedback and pics.

Take care,

Kevin