I wish "________" would make "________" !

I wish Case would bring back the Swayback Jack in CV. I wish Case would use only CV and stop making commemorative knives. I'd like for Case to also make a Barlow again.
 
I wish GEC would make a sowbelly pattern in 440C and primitive bone.

I wish anyone would make a 3¾" peanut with a sheepfoot secondary.
 
I wish Buck would make a Barlow.
I wish Buck would bring back the 307 Stockman.

420HC or 1095, either steel would work for me.
 
I wish GEC would make an ongoing run/ perpetual availability of a select core selection of patterns, like real knife companies used to do...LOL.
 
Another for the Case SBJ in Chestnut CV!!! Come on Case answer to your fans!

I also wish that Case would make the Seahorse Whittler in Chestnut Jigged Bone and CV!

And, that GEC would make the Northwoods Madison Barlow in Clip Point with Black Water Jigged Bone!
 
I wish Mora would make more wood handles knives, like Martiini does.

I only know about the Mora Scout and the design really doesn't appeal to me...
 
afishhunter said:
I wish Buck would make a Barlow.
I wish Buck would bring back the 307 Stockman.

.
Click to expand...

Buck never made the 307. Camillus made it and owned the tooling. Buck would have to create the tooling from scratch. Expensive.
 
I wish there were more 'mimd-tech' traditional knives (the only ones I am aware of are the Case-Bose collabs) from some of the smaller makers like it is common in modern pocket knives (sebenza and the like). In onther words the spece between $100 production knives and $400+ custom knives.

I wish I could get a knife with design similar to forum 2015 knife with either high carbon steel or 'better' stainless steel and slightly taller handle in a production knife or above mentioned mid-tech.

I wish more custom makers would offer two blades on single spring knives.

and

I wish that all cool production knives were not sold out 12 months before I learn about their existence :)
 
I wish gec would make a 81 with a clip and pen blades on the same end.

I wish case would offer more handle options on their cv steel knives.

I would also wish gec would make a 66 trapper with a clip and warnecliffe blades. Actually more 66s in general would be a wish.

I wish the traditional knife communtiy would make an effort to stop people from buying knives just to resell them in new condition at 25% plus mark up.
 
Last edited:
I wish Case would harden their 420HC to 58RC so my Sodbuster would hold an edge like my Bucks and Opinels do.

I wish Case would offer a lockback version of their Sodbuster.

I wish Buck would offer a thinline version of the 112 with a convex ground blade and either no nick or a long pull nick.

I wish Buck would offer a thin 110 barehead with a convex grind.

I wish Buck would stop producing imported traditional (an oxymoron, IMO) and just concede that market to Rough Rider and Taylor (unless, of course, Buck wants the brand to be thought of in the same way that RoughRider and Taylor are).

I wish Opinel would come out with the a G-10 series in the 6 through 10 size range.
 
I wish GEC would make this 3.5" Serp Pen, single-spring, NS liners, carbon and stainless option. It has totally sunk-joints, we can omit the Sabre grind however..

IMG_2245.jpg


I wish Queen would make a 3.5" Sleeveboard with Tip bolsters or their No.3 Sleeveboard with a bigger Master blade...

I wish someone competent would make a 3.5" Swell End Barehead, with small Rat-tail bolster, Long pull Sheepfoot, in various woods and light coloured Peach Seed bone. Brass free preferably.....
 
I'll add to the Coffin Jack wishlist.... ebony covers, thoughtful shield, spear main and pen secondary.... :D
 
I wish GEC would make a Sowbelly in 1095 or 52100.
3 blade.

Trailing point main, lots of belly, sunken deep for comfort when using secondaries
Wharncliffe
And spey or clip 3rd.
 
Last edited:
I wish GEC would make a 72 jack w' their #5 drop point and a pen blade (similar to the 72 Cody Scout Jack but for the main blade which uses their bullnose blade) or even better make the same knife using the slimmer #5 drop point that's used in the Schrade branded autos. If they made the same knife at 3/4 scale, they'd have my full attention as well. Additionally bring back black palm wood.

I wish Queen would make some #06L teardrop linerlocks using new/different cover materials.
 
Specifically, I wish GEC would make some 440C #48 Jacks. I like both the big clip and slender clip blades on the #48 and would probably have at least 1 each as users.

Generally, I wish GEC would make some 440C jacks. I'd take them in the #15, #73, #74, #77, #85 patterns. After the #48 of course.

I've been looking for a Queen #06 in jack configuration but couldn't find one. It looks like they'll be making one this year so no further need to wish for one. I just hope I like the cover materials.
 
I wish Canal Street Cutlery would make the decision to re-open.

I wish GEC would make more offerings in stainless.

I wish GEC would make a camp/scout knife.

I wish Case would make more offerings in CV.

I wish Case would make a Barlow again.
 
I wish "Bladeforums" would make a PunchNut, or GunPunch. Small slipjoint with wharncliffe primary and punch secondary!
Koa/Desert Ironwood/gidgee as well, while dreaming- hitachi blue/52100/or even a nice CPM, small carbide slicer.
But I dream....
 
You must log in or register to reply here.
Back
Top